No video
XTD CLUTCH KIT! (ARE THEY WORTH IT?) 🤷🏻♂️🤔
Рет қаралды 4,765
Күн бұрынwww.xtdusa.com/
@NOTaGLI 9 ай бұрын
6 speed swapping my Jetta (gen3/nonMQB/1.8/TS) (about 300whp right now) blew my second 5 speed this year... Lol I bought a 1300 SBC clutch for my 5 speed but they aren't compatible between the 2 clutches(resold for 500$ thank God) Found this XTD clutch on Amazon for under 200$ and decided to roll the dice. This video definitely bolsters my confidence!!
@minimanadam 4 ай бұрын
ABSOLUTELY IVE RUN THEM IN ALL MY BUILT MINIS ! BUT YOU NEEEEEEED TO GET OEM THROW OUT BEARING AND CANNOT run a dmfw , YOU MUST run a solid 1x piece flywheel Mine have last numerous years ( until i sold cars ) and theyve held 2-3x the oem power the car was built from factory with.. my r53 was 300+hp and stock are 172hp lolol the xtd stage 2x and i had a atafe 3x on my other r53 , theyre great. Im running a atafe 3x in my r58 jcw rite now actually
@DracoDoesIt 11 ай бұрын
SUBBED! thanks I'm on a budget for a project right now and this is EXACTLY the information i needed ! Appreciate your videos keep it up!
@Michal_S0L Жыл бұрын
awesome good things to hear waiting for mine to show up for my crv, im swaping it to manual
@donaldhess6129 8 ай бұрын
Just to let ya know I put a stock xtd clutch in my 2001 jetta tdi it oem HD an the pressure plate busted in half in 6 months at 4500 miles I expected a lot longer life out of it but probably a defect I changed a lot of clutch in my day an this is a first an the car is a daily driver back an forth to work no abuse at all normally driven never abused an this happened
@crv_tom 8 ай бұрын
That definitely sucks to hear man I totally understand I honestly think it might have been more of a defect issue which can definitely happen even with the best of the companies just sucks you had to go through that hopefully you got it all figured out.
@joealf4550 6 ай бұрын
I bought one in 2012 the clutch kit for a d series stage 4 drove the car for 2 years judt fune and sold the car to dome young kid and destroyed the clutch less than a month
@davidep3 Жыл бұрын
I just installed a stage 4 in my k20a3 ep3 with boost last night and I'm hoping everything holds up well 🙏 thanks for the info
@ed_gamer8949 Жыл бұрын
how did it work for you
@davidep3 Жыл бұрын
@@ed_gamer8949 honestly I just got my ecu back from hondata and i will be tuning the car this week so I still haven't tried the new clutch! Along with several other parts, some eBay and some name brand parts so im hoping everything goes well
@ed_gamer8949 Жыл бұрын
@@davidep3 I wish you luck I will buy it too I hope it works for both of us
@this-guythat-guy6251 10 ай бұрын
hey man, i"m in the same spot. can u tell me hows everything is holding up? clutch wise lol
@mattandkatchristie2552 9 ай бұрын
How was the clutch holding up?
@user-ph8lt4lb4y 2 күн бұрын
I just bought a xtd stage 1 organic clutch and lightweight flywheel kit, it says that it fits a 97 civic but I’m not too sure anyone have any feedback with that style clutch from xtd?
@crv_tom 2 күн бұрын
I've had several of the stage 1 for different vehicles, and they've all been great.
@kemoimorris9754 Жыл бұрын
Thanks for the info. This was a great video brother👌👏
@crv_tom Жыл бұрын
Awesome I'm glad to hear it could help!
@schte1n Жыл бұрын
BEWARE. Mine exploded because they drilled the underside of the pressure plate to balance it and aimco clutch would not respond to my warranty claim. Absolute rubbish!
@crv_tom 10 ай бұрын
Hey definitely sorry about your experience man I probably had 10 plus of them and never had one problem that definitely sucks to hear about that hopefully in the end they took care of you or you found a clutch kit that worked for you from another brand.
@billyano 7 ай бұрын
im thinking to buy an stage 2 with light flywheel for a newedge mustang full bolts on ... like 370-400 hp... do you think the clutch will be good or i should buy another brand???
@crv_tom 7 ай бұрын
I would probably go with a stage 3 at that point just to be safe, but I've never had any issues with them on any car.
@misunderstoodvtec8299 9 ай бұрын
Hi tom im interested in the xtd stage 5 have you used one any news will be appreciated very much 😊
@crv_tom 8 ай бұрын
I myself have never used the Stage 5 but I had a few friends that used a Stage 5 and their turbocharged Del Sol and a few other turbocharged Hondas and we're very happy with the results.
@misunderstoodvtec8299 8 ай бұрын
@crv_tom hi mate OK thank you for your reply I'll get one then cheers I'll keep you updated on my build 👍 f series sohc vtec engine.
@theaccordman2074 Жыл бұрын
Just finished the 500 breaking and wont engage after 6k or High RPM. Helo pls
@crv_tom Жыл бұрын
That definitely sounds like either incorrect install or possibly your fulcrum ball if your transmission has one or throw out bearing is having issues possibly other things. I wouldn't think you got a defective clutch I have not had that happen to me but definitely could happen every now and then problems like that can happen.
@luischerena1665 Жыл бұрын
Just bought a stage 2 for my fa5 k24a
@Brian-sp4fs Жыл бұрын
How is it
@kdog6793 Жыл бұрын
Yeah any update? I just installed one on my k24a1 dc5 n I’m still in the break in process
@vtec3070 Жыл бұрын
How's it going? I'm to order one
@kdog6793 Жыл бұрын
@@vtec3070 mines holding up very nice, broke it in for about 400 miles and then gradually eased into ripping on it and it feels great!
@sheldonnewton9435 2 ай бұрын
@@kdog6793 still hold up bro? Any chatter ?
@theaccordman2074 Жыл бұрын
How is the stage 3 for daily?
@crv_tom Жыл бұрын
Not bad at all, still holds up great to this day!
@theaccordman2074 Жыл бұрын
@@crv_tom but im saying how is the pedal? Hard?
@monteljackson990 Жыл бұрын
Stage 3 typically has more clamping force so the pedal will be much stiffer than oem.
@crv_tom Жыл бұрын
With xtd pressure plates it's surprisingly not that bad they still hold up very good under a load but the pedal feedback is not terrible at all you'll be really surprised.
@theaccordman2074 Жыл бұрын
@@crv_tom I just finish the breaking period clutch work fine on low rpm but at 7krpm won't engage to the next gear😢😢
@sidsmith4832 Жыл бұрын
Would xtd stage 2 clutch be ok in rsx with k24a2 tsx swap?
@crv_tom Жыл бұрын
Should work just fine and give you no problem as long as you do everything you need to do right when installing it.
@sidsmith4832 Жыл бұрын
@@crv_tom great thanks for info
@junaidjunu1879 2 ай бұрын
@sidsmith4832 do you have any feedback on the stage 2 Clutch?
@sidsmith4832 2 ай бұрын
@junaidjunu1879 well It good in rsx grabbed great. But after 1yr 12k mi throw out bearing went out. So it didn't last very long. Clutch still had some life left but went ahead and put exedy clutch in oem. See if lasts longer. Doesn't grab like xtd though
@ELCOMPAMOTORSoficial Жыл бұрын
Cuantos tienpo tienes con este cluch amigo
@crv_tom Жыл бұрын
Hey sorry for some reason it won't translate if you or somebody can translate it for me I can take a look at the question.
@Atoonn13 Жыл бұрын
He said: How long have you had this clutch friend?
OrdoTunes
Рет қаралды 108 М.
REALSTREETPERFORMANCE
Рет қаралды 42 М.