How to do a Timing Belt and Water Pump Change on the F1A 2.3-litre Iveco Daily Engine.

No video

How to do a Timing Belt and Water Pump Change on the F1A 2.3-litre Iveco Daily Engine.

Рет қаралды 160,442

Күн бұрын

new video relating to this with additional information .
• Iveco Daily/Fiat Ducat...
Not an update on my van build, but more of a "how to do video" on the timing belt & water pump change on the 2005 Iveco Daily 2.3 Litre Diesel power plant, which it Shares with the Fiat Ducato.
Shopping list to carry out the "Timing Belt Replacement.
Links:
TIMING BELT "LOCKING PIN KIT"
amzn.to/3r556PI
(GATES)TIMING BELT KIT with water pump.
amzn.to/3oWFX6X
(GATES) TIMING BELT KIT without the water pump.
amzn.to/3FG3ShP
(FAI) CAM CHAIN KIT.
amzn.to/3r2PyMv
I'm currently converting my 2005 "Iveco Daily" XLWB van into to a camper van, now fully repainted in a Nato light stone colour. Im currently repainting the chassis, carrying out welding repairs to the underside of the body, and spraying on stone chip.
You can follow my van build on Instagram.
/ markcollom_iveavan
Due to the weather ( raining on and off ) I decided to carry out the timing belt and water pump change, and in this episode shows how I carried out this task.
Admittedly this is an long video! And may not be in your interest in viewing if your not intending to change the timing belt and water pump yourself !
The van shares the same 2.3 litre diesel engine as the "Fiat Ducato" (Ram ProMastervan "USA version "). In this episode I show an indepth step by step guide on how I changed the timing belt, pulleys and also the water pump. So this maybe of some intrest to you if your thinking of doing the task yourself, Id personally would set aside an full day to carry out the timing belt and water pump change. ( it took me around 4 hours in completing the job, but I had already removed the front of the van beforehand. )
Iveco Daily 2.3 litre diesel engine timing belt change intervals - 150.000 miles or every 5 years ( or which ever comes first ).
Fiat Ducato 2.3 litre diesel engine timing belt change every - 5 years.
#cambelt #timingbelt #waterpump #campervanbuild #ivecodaily #ivecodaily2.3hpi #howtochangeatimingbelt #howtochangeacambelt #iveco #vanlife #ukvanlife #vanbuild #selfbuildcamper #iveavan

Пікірлер: 135

@peterjames928 Жыл бұрын

This is Excellent. No Nonsense, Nice steady camera, Iveavan shows you what you need to know and has edited out what you don't, Excellent, Many Thanks

@Iveavan Жыл бұрын

Thank you Peter 😉👌👍👍👍.

@RedHeadForester 2 жыл бұрын

After my auxiliary belt tensioner pulley catastrophically failed today and shredded the belt, replacing the timing belt and associated gubbins has entered my to do list - don't really want it to fail like my VW T4's one did, where the water pump took out the timing belt! This is a cracking video and will make the task much, much easier when I get to it. Thank you!

@Iveavan 2 жыл бұрын

Sorry to see your past experience, but good luck in doing the. Timing Belt 😉👌👍👍👍.

@ptrduggan5 4 жыл бұрын

Doing one of these on a ducato tomorrow and as a hgv mechanic Im not familiar with em. Fantastic video, feeling alot more confident to attack it knowing what lays ahead

@Iveavan 4 жыл бұрын

Cheers matey to be fair the hardest part is getting the bottom crank pulley off bud 😉👌👍👍👍.

@ptrduggan5 4 жыл бұрын

@@Iveavan gonna be real fun with a chassis leg blocking the way 😅

@ssss-df5qz 3 жыл бұрын

I have a 2011 Ducato and it's a piece of cake compared to the Iveco. The chassis leg is literally no problem. Just drop the engine enough so you can see the crank bolt or get a right angle impact gun. If you want a ton of fun with either of them, do yourself a brake vacuum pump.

@Flash_Fix 3 жыл бұрын

thanks mate, got 5 of these to do as fleet work next week so you just made my life a whole lot easier. Appreciate the video sir, all the best!

@Iveavan 3 жыл бұрын

Your welcome bud, 5 wow 😬, enjoy 😉👌👍👍👍.

@raskaranka6320 4 жыл бұрын

Great video, followed this while changing a diesel pump on a 2008 2.3.It was a but of a mission to get the crank and diesel pump pulley so managed to get a harmonic balancer puller from machine mart and a universal pulley holder tool from Amazon and made the work a lot easier.I would advice anybody tackling this please do yourself a favour and get these tool to save yourselfs a bit of time and damage.Otherwise I really do appreciate this video can't thank you enough mate.

@Iveavan 4 жыл бұрын

Cheers matey, yes I agree with you regarding the crank pulley, they are absolutely pain to remove, my fuel pump pulley wasn't so bad to be fair matey, then again!.... I've got to do all of this again, on the new engine 🙄😅😁👍👍👍.

@patrickrx1564 5 жыл бұрын

la vidéo la plus complète sur le changement pompe a eau,courroie de distrib et accessoire sur iveco daily du net.....Bravo et merci

@Iveavan 5 жыл бұрын

merci beaucoup, j'espère que la vidéo vous a aidé. Merci encore.😉👍👍👍

@brianoliver5188 4 жыл бұрын

thanks buddy i only needed to know about diesel pump pulley remove cheers

@yr4137 5 жыл бұрын

Very useful video. I hope I will find the same screws to block the crankshaft and the camshaft on my 2003 2.3 Inkjet 4 cylinders... Thank you very much for the time you took to share your knowledge.

@Iveavan 5 жыл бұрын

You're welcome Yann and thank you 😉👍, I only used (if my memory serves me well) a 6mm bolt for the cam shaft, and utilised the timing marks on the new belt it self mate, you can't go far wrong by doing that. But for peace of mind, I do recommend using a Timing tool set. 😉👍👍👍

@surfreadjumpsleep 2 жыл бұрын

excellent vid. great fun to watch you work

@Iveavan 2 жыл бұрын

Thank you matey 😉👊👌👍👍👍...

@stevebonnici8012 5 жыл бұрын

Thank you for this video. Thanks to this i performed the same job. Im also doing other jobs on the van while the front end is off.. de scale and painting/ bumper anchor side brackets repace / cab mount bushes...... Thank you

@Iveavan 5 жыл бұрын

Thank you Steve 🙂👍, I did exactly the same matey, good luck on your project mate 🙂👌👍👍👍

@stevebonnici8012 5 жыл бұрын

@@Iveavan had the van since 2009.. 17k... its been my pride and joy" intend to keep it...

@Iveavan 5 жыл бұрын

Add 300k on top of that, that's what mine is at 317k (miles) they keep on running matey 😎👍👍👍

@frankd5871 5 жыл бұрын

Big job to do, very good video thank you for making the effort, taking the time to video the job and put the vid on youtube.

@Iveavan 5 жыл бұрын

No worries Frank and thank you for your comment 😉👍👍👍.

@robertlee3734 4 жыл бұрын

oldman in a van nice one

@Iveavan 4 жыл бұрын

No worries matey 😉👍👍👍.

@spencersteele1229 Жыл бұрын

Clear and concise .

@Iveavan Жыл бұрын

Thank you Spencer 😉👌👍👍👍.

@ARM_1986 Ай бұрын

Very helpful thank you so much

@Iveavan Ай бұрын

No worries, mate 🙂👌👍...

@chrismartin5772 5 жыл бұрын

Very helpful and explained in away that you can can understand

@Iveavan 5 жыл бұрын

Thank you Chris, I'm glad you found it some use mate 😉👍👍👍

@muso1958 5 жыл бұрын

Nice one saved me a bit of head scratching

@Iveavan 5 жыл бұрын

Cheers matey😉👍, I'm glad you found it useful 😁👌👍👍👍.

@user-wq5zt3px6l 5 жыл бұрын

THE BEST ON KZfaq (AND BETTER THAN DEYCOS) ABOUT THE TIMING/WATER PUMP OF FIAT/IVECO. PITY THE VOLUME IS TOO LOW.

@Iveavan 5 жыл бұрын

Thank you 😁. Sorry about the volume, I used to edit with head phones, (stopped using them now) giving a false impression that the sound ok 😉👍👍👍

@MrB4Tube 5 жыл бұрын

Great video mate, thanks a lot. At 17:43 Loctite 243, not 234. :)

@Iveavan 5 жыл бұрын

Haha, well spotted! 😁, I definitely need to go to spec savers! 🤔😉. Cheers matey 😊👍👍👍.....

@toastieup 4 жыл бұрын

👍 I might just get the garage to do it 😬

@Iveavan 4 жыл бұрын

It be easier bud 😅😁😉👍👍👍.

@rogermariner2813 11 ай бұрын

excellent video

@Iveavan 10 ай бұрын

Thank you matey 😉👌👍👍👍.

@seanwesley9556 4 жыл бұрын

Good sir can you please do a quick walk through video on the iveco daily I just bought one and have no idea what's what.

@Iveavan 4 жыл бұрын

Im pretty sure with the ordeals I've documented on here with mine, that should give anyone an incite what to expect with an Iveco matey 😉🤭👍👍👍.

@rachidloualid4307 4 жыл бұрын

Je suis de France bravo bien expliqué

@Iveavan 4 жыл бұрын

Merci beaucoup😉👌👍👍👍.

@siciliano...94800 10 ай бұрын

Grand mécanicien 👍🏻

@Iveavan 10 ай бұрын

Cheers matey 😉👌👍👍👍..

@JackButlerVideos 4 жыл бұрын

what things are being run by the first "accessory belt"? alternator, fan and what? water pump? cheers for any advice mate!

@Iveavan 4 жыл бұрын

The water pump is run off the timing belt, you may have two "accessory belts though" ! One belt runs the radiator fan and alternator. The other belt runs the air-conditioning has "standard" 😉👍.

@JackButlerVideos 4 жыл бұрын

@@Iveavan thanks!

@madasfish2662 4 жыл бұрын

Looking at all the work you had to do on repairs if doing again would you get a later van and do you think there's enough head room i have a chance of a 04 iveco daily lwb s2000 same roof hight as yours I'm 6ft tall after you done the floor and roof how much hight is left to stand up thanks keep up with the great videos

@Iveavan 4 жыл бұрын

I'd probably would get an newer one now bud, but saying that, this is so easy to maintain and repair! So swings and roundabouts on that one🤔👍. At 6ft you'd be able to stand up in mine but you would catch your head on the skylight surround, so I'd probably only use 25mm PIR for the flooring, cheers matey 😉👍👍👍.

@banntheman7925 4 жыл бұрын

GREAT JOB A LOT OF WORK FOR JUST A BELT BUT WITH OUT YOU ARE DOOMED TO TO LOT OF MONEY I HAVE A RELAY THEY TELL ME IT'S A CHAIN GREAT ASKED HOW MUCH FOR CHAIN £83.00 BUT £650 TO FIT A NEW ONE ??? GREAT VID THANK YOU AGAIN FROM SKEGNESS UK

@Iveavan 4 жыл бұрын

Yeah you be paying for time due to it being labour intensive ⌚🙄😉👍..

@stoyan4o0o 5 жыл бұрын

Very good video mate, keep it up!

@Iveavan 5 жыл бұрын

Cheers matey, comments like this make it worth while in filming and sharing it 😉👌👍👍.

@Kris-yh5uk 4 жыл бұрын

Great guide! Don’t suppose you know the torque spec for the fuel pump sprocket

@Iveavan 4 жыл бұрын

Apologies only just seen this, not at hand unfortunately, Sorry, I can't even remember what torque I did tighten that too 🤔😉👍👍👍.

@ssss-df5qz 4 жыл бұрын

I'd go for the thread lock and a safe 90nm I recall removing mine, the old belt being on was enough to allow me to crack the nut.

@CarlosVeladoLlanes 3 ай бұрын

Muy bien 👌

@Iveavan 3 ай бұрын

Thank you, Carlos 😎 👊 👌 👍...

@AutoRazdolbay 3 жыл бұрын

Класс! Молодец! Хорошо делаешь! Привет из России!

@Iveavan 3 жыл бұрын

Thank you 😉👊👌👍👍👍.

@ktownmasiv Жыл бұрын

Great video, giving me confidence to change the cam on by Daily. Can I ask, what paint do you use for the chassis? The red paint, and would you recommend? Cheers

@Iveavan Жыл бұрын

Thank you matey 👌👍. The paint is "Red Oxide", 4 years on its still like that, but I've noticed a small amount of rust build up close to the wheel arch area. In hindsight I'd probably would do the chassis with red hamerite 😉👍👍👍.

@williamtaylor6603 6 ай бұрын

I have a 2015 iveco daily Are they any ways of seeing the timing belt or does the timing belt need to be removed first

@Iveavan 6 ай бұрын

Do you mean you to visually check the condition of the belt in situ ? If so? You can remove the bolts on the cover and pull it back so far, and then you would need to manually turn the engine over to inspect/visually check the belt condition 👌👍.

@tommyarno9935 5 жыл бұрын

After the second lot of 8 rotations, it looks like the belt is sitting proud of the cam n crank pulley by about 3-5mm and then you say to make sure the belt is set back on all the pulleys. Do you loosen the tensioner pulley agin to push the belt back on?? Mine seems to of ran off by a similar amount, but I can’t push it back on while the belts under tension....

@Iveavan 5 жыл бұрын

Yes mine did by a few mm, I reset my tension again and pushed it back and retensioned again, after a couple of turns I fitted bottom part of the cover and bottom crank pulley, and that seems to prevent the cambelt from riding off bud 😉👍👍👍

@tommyarno9935 5 жыл бұрын

my fuel pump pully has a timing mark on it, does that mean it has to be tied up? I can see where the other two pulleys have been marked up before but cant find a corresponding mark for the fuel pump pulley mark, I took a pic before I took the belt off, but there's no guarantee ill be able to get it back to the exact same tooth on the belt. I have an 08 fiat ducato 2.3 L 120 multijet. You videos are great btw, wouldn't of been able to do this job without you.

@Iveavan 5 жыл бұрын

Thank you matey 😉👍, No mine didn't either, don't worry about the position of the fuel pump pulley, (it's a pump nothing more) , just concentrate on the camshaft and crankshaft timing marks bud 😉👍👍👍

@megavlogs8381 5 жыл бұрын

please help! when removing the crankshaft drive belt pulley, do you need to remove the middle bolt? doesn't look like you do but I cant get the pulley off for the life of me! Great vid btw

@Iveavan 5 жыл бұрын

Thank you 😉👍, No, four smaller bolts around it, wire brush on a drill to clean the rust off, plenty of "Wd40" and gently tap each end of the crankshaft pulley with an copper hammer and work off, mine was a sod to get off, about an hour TBH, middle bolt is for the cambelt crankshaft drive pulley only 😉👍👍👍.

@megavlogs8381 5 жыл бұрын

thanks a lot. managed to get it off eventually. got the cover n timing belt off. now on the water pump :) @@Iveavan

@Iveavan 5 жыл бұрын

Excellent matey 😉👌👍👍👍

@robyesidra9490 Жыл бұрын

Thank you so much

@Iveavan Жыл бұрын

No worries 😉👌👍.

@dorjekandro 3 жыл бұрын

First of all thank you so much for this wonderful video, for me its more helpful then all the papers and documents out there. Unfortunately I am facing a problem. Because I couldn't get the crankshaft pulley of, I talked to Iveco, they recommended to take out that 19mm bolt, which I did. But then the whole crankshaft drive pulley came of too. The belt didn't fall of the pulley, after realizing what happened I put the pulley with the belt on back on. Now I am just scared that I changed the position of the pulley or the crankshaft. Is that possible? I will have to put the bolt on again with 200nm thats for sure but I can just hope that the position is still ok. Do you have any advice? I hope my English is understandable, thank you so much for your help! FOR EVERYONE DOING THIS JOB; DO IT EXACTLY AS SHOWN IN THIS VIDEO! even Iveco was bullshiting me...cheers!

@Iveavan 3 жыл бұрын

You should be fine by placing a timing tool on the crank locking that into position (or an 9mm drill bit) and making sure that the timing is aligned and locked into position on the cam pulley. Fixing the crank drive back on and torqued back up😉👍, I used a small wire brush on a drill to clean up the bolts on the crank pulley and soaked that area with WD40 over night, still took some work in removing that pulley by working it off the crank though 😉👌👍👍👍.

@RC370 3 жыл бұрын

Hi, nice vid, helped me :) I just have question, why did you did 8 full turns with new belt ? Thank You

@Iveavan 3 жыл бұрын

Cheers matey 😉👌👍, because to allow inlet and outlet valves in all 4 cylinders to open and close, making sure there's no interference bud 👌👍👍👍...

@RC370 3 жыл бұрын

@@Iveavan Aaah, yea, got it, that's make sense :D Thank You again :)

@ivecamperbuild_thomas4084 4 жыл бұрын

Hi Mark can I pick your brains the front grill do you have to remove the head lights to remove the grill as I want to put 2 , 5 inch LED lights on each side of the IVECO badge on the grill , I have just fitted a 52 inch one over the windscreen, or dose it come off without removing the head lights ? Thanks in advance 🙏

@Iveavan 4 жыл бұрын

kzfaq.info/get/bejne/ac6fi7CXyanclWw.html @2:50 onwards on the video above you can see how the grill goes back together, they is two 10mm nuts (one top and bottom) in the centre of the panel mate 😉👌👍.

@valiotodorov3952 2 жыл бұрын

Браво

@Iveavan 2 жыл бұрын

Thank you 👌👍👍👍.

@willie261984 Жыл бұрын

Hi I've got one that's jumped 2 teeth runs with new belt but not right. Can you remove head in situ or engine out?

@Iveavan Жыл бұрын

To be honest, I'm not sure myself, I'd imagine it will be tight but doable by removing the expansion tank will give you more room 👌👍....

@iuliandupir4778 3 жыл бұрын

Can I ask u what size of screws did u use to take out the pulley from the high Presion pump?

@Iveavan 3 жыл бұрын

From memory, I think they were possibly 8mm thred.

@simonwhite699 2 жыл бұрын

Hi, could you tell me what holds the High Pressure Pump in place once the bolts have been removed from the water pump please? As there are no bolts holding the H.P. Pump on the Engine Block? Meaning the pump would be held in situ with just the High Pressure Pipes ? Many thanks look forward to your help cheers Simon.

@Iveavan 2 жыл бұрын

No your right, I have air conditioning pump on mine, it rested upon that, (in which it sat at the right level) you'll have tie wrap it back onto something solid or remove it unfortunately bud 😉👌👍👍👍.

@simonwhite6208 2 жыл бұрын

@@Iveavan Thank you very very much for getting back to me so quickly, I really do appreciate it I'll use several tie wraps to secure from above, Many Thanks again Simon.

@Iveavan 2 жыл бұрын

No worries Simon 😉👌👍.

@sophiapire7677 3 жыл бұрын

La bomba de inyección. Cuál es el punto del tienpo

@Iveavan 3 жыл бұрын

The injection pump doesn't need to be timed up on the 2.3lt engine 😉👌👍....

@Iveavan 2 жыл бұрын

Parts List Links: TIMING BELT "LOCKING PIN KIT" amzn.to/3r556PI (GATES)TIMING BELT KIT with water pump. amzn.to/3oWFX6X (GATES) TIMING BELT KIT without the water pump. amzn.to/3FG3ShP DISCLAIMER! These are Affiliate links that I've provided.

@Iveavan 3 жыл бұрын

The New Cambelt Video with Additional Information 👉 kzfaq.info/get/bejne/d62WebeaycXHiGw.html

@enesenes9037 4 жыл бұрын

Perfekt

@Iveavan 4 жыл бұрын

Cheers matey 😉👍👍👍.

@cryptoneon 4 жыл бұрын

Any idea how I remove the viscous fan coupling at all and what size socket do I need if any to get the centre bolt off cheers

@Iveavan 4 жыл бұрын

Mine is an clutch fan operated around 95°C electronically, just a ring of 10mm headed bolts 6 in total (if I remember correctly), if its viscous fan you're going to need a viscous fan spanner ( www.amazon.co.uk/dp/B003AMVWS4/ref=cm_sw_r_cp_apa_i_VrWgFbR1RHEQY ), possibly an left hand thread to be undone depending what van / engine it is bud 🤔😉👍👍👍.

@ssss-df5qz 4 жыл бұрын

Not so easy on the FWD Ducatos though. Been a bloody nightmare.

@Iveavan 4 жыл бұрын

Yeah I imagine it'll be tight in there bud 😉👍.

@ssss-df5qz 4 жыл бұрын

@@Iveavan got brake vacuum pump to do and all! She's buried 🤦

@eriksterkel 2 жыл бұрын

Hey Gays 👌 how I can get thes round peace of metal of ? On 3.05 🙏

@Iveavan 2 жыл бұрын

I placed a wire brush upon my drill and removed the rust build up, soaked the crank pulley with WD40 and left for oil to soaking over night. Removed the 4 bolts holding the pulley in place, then lightly tapped around the crank pulley (this took around 30 minutes) until it worked its way loose 😉👌👍👍👍.

@michaellambert5191 3 жыл бұрын

Hi am after some help if possible my van started smoking last year so got it remapped and dpf removed shortly after it started smoking bad so had someone look at it and advised me to check injectors so had them replaced at the cost of 800 quid then got new turbo still smoking so cleaned out Intercooler and houses then let it run for a bit to see if it would clear then oil started pissing out from behind timming cover A don't no what to do next it's a iveco daily 2,3 2013 model any info much appreciated

@Iveavan 3 жыл бұрын

Was your compressor wheel broken up or worn on the pressure side of the turbo prior to changing it bud?

@michaellambert5191 3 жыл бұрын

@@Iveavan hi thanks for replying old turbo was OK a think just going off what a was told am starting to think the garage where a took it to get remapped haven't done it properly as my friend got his done and a week later it blue the engine a just found out last night so going to take exhaust off and check dpf do ya think this could be the problem thanks

@Iveavan 3 жыл бұрын

@@michaellambert5191 no worries bud, to be without seeing it person it's gonna be hard for me to pin point the issue upon here to be fair, but if you work your way backwards (with blue smoke sounds like an oil leak) see if it improves by removing the oil filler cap, that'll tell you whether there's an issue with the crank breather, (what with you saying it's leeking oil in the cambelt area) then I'd work my why back looking at that DPF that you bypassed, if that seems to be OK then I'd be inclined to remove the exhaust manifold bud 😉👍.

@michaellambert5191 3 жыл бұрын

@@Iveavan thanks for the info much appreciated a will let you know how a get on

@jimmccarron1286 3 жыл бұрын

Good video but could do with a better microphone your a bit quite

@Iveavan 3 жыл бұрын

Thank you Jim 😉👌👍👍👍.

@SundryGirl 6 жыл бұрын

Hi Mark do you know anything about serpentine belts for example do they make a loud squeaking hissing noise when you give it gas? No rush to get back ever. Take your time. PS how long til your van will be ready for on the road travels. Tis looking mighty mighty great🤙😜🎉

@Iveavan 6 жыл бұрын

Hi Sunday Girl it might be loose/slack and needs tensioning ( it should be self tensioning if it's a serpentine belt though ?? ) Or it could be worn, or a dry bearing in either the tensioning pulley or idling pulley ?? I know the V belts to slip if they are slack ? 😉👍👍👍

@SundryGirl 6 жыл бұрын

Mark Collom #Iveavan thank you. My local people at car toys told me I needed a serpentine belt but just wanted to make sure as a double backup I do that with everything nowadays especially with doctors always getting a second opinion thank you dear. I appreciate your help👍👍👍

@george5123 6 жыл бұрын

Great video thank you!!

@Iveavan 6 жыл бұрын

Cheers Matey 😉👍👍👍.

@george5123 5 жыл бұрын

Finally got round to doing mine, used your video as a bible. Thanks

@Iveavan 5 жыл бұрын

Great! I'm glad you found it useful 😁👍👍👍

@jaromac5164 9 ай бұрын

A co řetěz..?

@Iveavan 9 ай бұрын

I bought the cam chain kit recently, so I'll do a video on that in the future 👌👍. At the time, my cam chain didn't need doing.

@natalieabbott3591 5 жыл бұрын

Is it the same for the 2013 mate

@Iveavan 5 жыл бұрын

If its the 2.3lt fiat Ducato engine, yes it will be the same set up 😉👍👍👍

@terriovington6241 5 жыл бұрын

Hi mark. What does the axillary belt run please?

@Iveavan 5 жыл бұрын

Hi Terri I have two. one runs (serpentine belt) the alternator, power steering and cooling fan (pulley) , the other one (small ribbed belt), just runs the air con pump. (unless you mean on the timing belt side did you?🤔) 👍👍

@terriovington6241 5 жыл бұрын

Wow i wasnt actually expecting a reply so soon.. i just chanced it because you seem to know your stuff thank you :). It's definitely nothing to do with the timing belt... what happened is the alternator belt came off (pulley/ tensioner thing broke) and the van still runs with no belt on, but the van is now making a lot of knocking noise from the top of the engine which it didn't do before..so I wondered if it also powered the oil pump because I can't work out why it's now suddenly tapping ...obviously it's not been driven like this the engine was turned off as soon as the fault was noticed the engine did start to get too hot but I pulled over before it actually over heated.

@Iveavan 5 жыл бұрын

@@terriovington6241 I've had it before where the engine has over heated and it starts knocking and gargling, but tapping sounds from the top end could be the hydraulic tappets or something like that (without seeing or hearing it, it's a bit hard to pin point) but the aux belts don't drive the engine's oil pump, is it still doing when it's cold too Terri?

@rachidloualid4307 4 жыл бұрын

Vous êtes de la Russie