MARLIN - Essential Guide To Start Editing Your Own FIRMWARE

Рет қаралды 111,028

2 жыл бұрын

Hi guys 🙂
So, you want to start editing your Marlin Firmware but don't know how?
Do you want to learn more about Marlin?
In this video, we will cover the code in the config files and everything you need to compile your own firmware.
In the channel, you can also find dedicated videos about firmware updates for specific printers.
♦♦♦ USEFUL LINKS⤵
♦ TEVO TORNADO 3D PRINTER - HOW TO UPDATE THE FIRMWARE:
• TEVO TORNADO 3D PRINTE...
♦ TEVO Tarantula 3D Printer - HOW TO INSTALL COMUNITY FIRMWARE:
• TEVO Tarantula 3D prin...
♦ How To Easily Configure & Flash Firmware to a BlackWidow:
• How to easily configur...
♦ HOW TO Update the Firmware - Ender3 & Ender3 Pro (8bits Board):
• Ender3 / Ender3 Pro - ...
♦ Ender 3 / 3 Pro (32bits Board) - Update Firmware:
• ENDER 3 / ENDER 3 PRO ...
♦ Ender 3 V2 Firmware Update:
• Creality ENDER 3 V2 - ...
♦ Creality Ender 3 V2 BLTOUCH - HOW TO Install in 3 Easy Steps:
• Creality Ender 3 V2 BL...
♦ Creality ENDER 3 MAX - How To EDIT & UPLOAD New Firmware:
• Creality ENDER 3 MAX -...
♦ Creality Ender 3 MAX BLTOUCH - HOW TO Install in 3 Easy Steps:
• Creality ENDER 3 MAX B...
♦ HOW TO Level your 3D Printer´s BED Like a PRO / Mesh Bed Leveling:
• HOW TO Level your 3D P...
♦ 3D PRINTER BOOTSCREEN - HOW TO ADD COOL GRAPHICS:
• 3D PRINTER BOOTSCREEN ...
♦ Adding games on your 3D printer with Marlin 2.0:
• HOW TO Unlock Hidden G...
🔶🔶🔶 If you like our work and want to help the channel, you can contribute using one of the following...
🔶 PATREON:
/ ruiraptor
🔶 PAYPAL:
Use our email to send your donation ( ruiraptor.channel@gmail.com )
🔶 You can also help by using our Banggood affiliate links posted below (costs you nothing and you are contributing to the channel):
You don't have to buy the item from the link. If you click on them and then buy whatever you are looking for works!
♦ Artillery Hornet
pt.banggood.com/custlink/mmDd...
♦ Ender 3 V2
pt.banggood.com/custlink/DmDK...
♦ Creality Ender 3
pt.banggood.com/custlink/mmmG...
♦ Creality Ender 3 Pro
pt.banggood.com/custlink/m3D3...
♦ Creality Ender 5
pt.banggood.com/custlink/D3GE...
♦ Creality Ender 5 Pro
pt.banggood.com/custlink/mGGy...
♦ Creality Ender 5 Plus
pt.banggood.com/custlink/G3DE...
♦ Creality Ender 3 Max
pt.banggood.com/custlink/mvKy...
♦ SKR Mini V2.0:
pt.banggood.com/custlink/vKGY...
♦ Tevo/Homers Tarantula Pro
pt.banggood.com/custlink/3DGm...
♦ Tevo/Homers Tornado
pt.banggood.com/custlink/vmGK...
Thank you so much for your support :)
🔶FOLLOW US ON SOCIAL MEDIA:
♦ / ruiraptor
♦ / ruiraptor
♦ / ruiraptor

Пікірлер: 151

@koorite. 2 жыл бұрын

I love you! I watched probably 10 or so "tutorial" videos before stumbling on this one. None of them helped me at all and only made me more frustrated. Your video was super clear and easy to understand for beginners like myself! Thank you so much!

@thatdude034 2 жыл бұрын

This video is pure gold. I had never messed around with marlin fw before and after this 20 min vid i feel i have a rather comprehensive grasp of how the firmware works. Thanks for saving me hours of reading around on the web. 10/10 would recomend.

@fredericopinto7200 2 жыл бұрын

This is an 3D god. I am still a noob, but since 2017 when I order my 1st printer, I have been following his tutorials through. What a pro!

@rickarddt 2 жыл бұрын

Thank you very much, you guided me through my first firmware upgrade with a previous vid, I think it was to enable g02 and g03 for arcweld to work. I was a total noob and struggled my 40 year old behind off.. Last worked with gcode at uni.. You do an excellent job, keep it up.

@DarrenGerbrandt 2 жыл бұрын

Just an addition, if you get an error when compiling, scroll to the top of the list after expanding the window and find the first error that comes up, deal with that and recompile, repeat until you get a successful compile. Fixing the very first error will often fix other errors as well, sometimes fixing one error will fix them all as the first error may have caused a cascading effect, ie. one error leads to another error which leads to another error etc etc.

@ruiraptor 2 жыл бұрын

Hi Darren, that is 100% correct and thank you for sharing that information. In our video, we just wanted to give the example but the information that you share here is also very important.

@chesterfield9768 8 ай бұрын

finally someone explained the specifics, it makes me want to learn. It's hard to find such videos in times when everyone only records the number of things you do wrong, without being able to show at least one how to do it right. whatever ❤

@percivalrc Жыл бұрын

I watched a LOT of videos on the topic... Your video is where I was SUCCESSFUL... Thank you!

@zydawn 2 жыл бұрын

thanks for taking the time to explain everything in such great detail. I look forward to watching your other videos

@ralphsavlov651 2 жыл бұрын

Thanks for the simple concise explanation. Too many publish videos in which they either assume that you have an engineering degree or speak far too quickly. Something that you should add is in the example configurations you must choose the correct version of marlin or you will not be able to access the config files that you wish to copy to Marlin. I spent hours scouring videos and articles before I found this information. Thanks again, I have always enjoyed your videos.

@gpsevinsixx 2 жыл бұрын

This is THE BEST tutorial for basic coding reference and descriptions to enable more tuning than just what's normally safe parameters!

@ruiraptor 2 жыл бұрын

Thanks for your feedback.

@supercurioTube Жыл бұрын

That was an awesome intro to both configuring and compiling Marlin! Doing that now, thanks a lot ❤

@supercurioTube Жыл бұрын

And now I'm running a new stable 2.1.1 firmware on my CR-10 V3, with increased max temps (bimetal heartbreak) original was 1.1.6. Lots of nice small improvements 😌

@ARMYStrongHOOAH17 6 ай бұрын

After many failed attempts, I finally compiled my first firmware today. Thank you!

@SukhithaAmarakoon Жыл бұрын

This is the best and most complete guide for compiling a custom Marlin firmware

@Coophack6584 2 жыл бұрын

Probably better than Teachingtech videos

@Jim_One-wl4ke 5 ай бұрын

Among all the Marlin setups Yours suits me the best for the clear steps & pace well define along the way. Highly recommended for beginner doing firmware flashing. A good teacher you are. Thank you very much for making this ❤

@udobyte Жыл бұрын

this video needs much more attention. Thanks.

@attnckr Жыл бұрын

finally simple explanation to help me workout my marlin not overcomplicated for simple folk like me!!!!!!!WELL DONE,CHEERS

@hanoverview 6 ай бұрын

this did help me so much. thankyou! my thinker SE is runing like crazy now!

@seanyfpv Жыл бұрын

thank you so much! always wanted to edit my own firmware but was a bit intimidated, this video was so well done, clear, and helpful, THANKS

@ruiraptor Жыл бұрын

Thanks for the feedback. Glad it helped :)

@OrlandoColonJr Жыл бұрын

Exelente video! Saved me a lot of time and headache. Thank you!

@grahamhockaday336 Жыл бұрын

Thank you, that was without a doubt the best introduction to Marlin.

@ruiraptor Жыл бұрын

Hi, thanks, glad it helped 🙂

@enmanuelhenriquez975 Жыл бұрын

this is the best video I found for marlin

@ggpp4536 2 жыл бұрын

👍 Bravo !! Very nice, model presentation rare to find-

@bruceyoung1343 Жыл бұрын

For 3 days I have struggled at vsCODE for my 3d printer. I know the basics as I’ve done it so many times. But each time I’m so happy seeing no errors. The it fails when building. I think YOUR video is just what I needed. I saw a few options I missed. Thank You 🙏

@ruiraptor Жыл бұрын

Thanks for your comment. Glad it helped :)

@georgeflensburg3087 2 жыл бұрын

Your amazing man, your amazing!

@deniblender 2 жыл бұрын

Thank You Man. Easy, Understand. Thank You So Much.

@ruiraptor 2 жыл бұрын

Thanks. Glad it helped 🙂

@WhamBamSystems 2 жыл бұрын

Wonderful explanation, very clear and useful!

@ruiraptor 2 жыл бұрын

Thank you :)

@PrimeObjective23 2 жыл бұрын

Hey, I wann give big thank you for that video !!! I bought an SKR Mini E3 V3 where the provided firmware was not working with the CR-Touch. As a newbie no one could help me… so I watched your video and compiled my own firmware. Everything works 100% now ! I never thought I could do this on my own with a KZfaq video and some hours of work and patience 🙂 Thank so much !!!

@ruiraptor 2 жыл бұрын

Thank you for your comment. Glad it helped :)

@starshrek8632 Жыл бұрын

I have the exact same situation right now as I have an SKR MINI E3 v3 and my Cr touch is not working glad to know you got it working

@lordhexon 2 жыл бұрын

Great great explanation, all the other videos they skip so many steps. Thank you

@stealth123 2 жыл бұрын

This video help me loads 👍👍👍

@wilkoslavakia 2 жыл бұрын

very good video easy to follow

@CorvusSpiritus 2 жыл бұрын

Obrigado, Rui! I remember first time I decided to upgrade it was such a pain in the ass to reach it yourself with absolutely no knowledge in coding & electronics, just pure nightmare.

@remyquintalvaillancourt4071 2 жыл бұрын

I love you thank you so mutch for the help ! You are legit a angel carrying my 2 cell brain thank you again!

@ruiraptor 2 жыл бұрын

Thank you for your feedback. Glad it helped :)

@hamzajamal5661 Жыл бұрын

Hi thank you so much for your help. Two question as well, what do the endstop pull up and pull down setting do? Can I just turn them off for my custom 3d printer?

@umeshjawalikar4913 2 жыл бұрын

best explained..thanku

@benji6658 Жыл бұрын

This is perfect!

@ruiraptor Жыл бұрын

Thanks 🙂

@user-pn3hs3kr5x 2 жыл бұрын

very helpful tutorial

@kyle72ab 2 жыл бұрын

great video! thank you

@ruiraptor 2 жыл бұрын

Thanks for the comment.

@mealticketraceway 3 ай бұрын

Awesome

@UncleF115 Жыл бұрын

hi, thx for the guide, after i flash fw the xy limit switch cannot stop the motor when homing, where shall i troubleshoot?

@DR-br5gb 2 жыл бұрын

I configured my firmware for a cr10 several years ago on a machine I no longer have. I still have the .bin backup and looks like I made a copy of the config.h onto a USB drive. Do you know if a .bin will open in platformio, re-compiling the modified Marlin firmware?

@Edward3DFX Жыл бұрын

hi, I need help re configuring the .bin file for a XYZ PartPro 300xt so that the machine can use any filament - is there any way to do this with your methods? ? PLEASE PLEASE HELP

@Flashmand2012 10 ай бұрын

nice thx

@Filmman586 2 жыл бұрын

Hi Rui! I came across your videos and WOW!!! So much helpful information..Question? Looking at getting a larger build area printer 300x300, any recommendations. Looking for something stock that prints well.. Lou

@RinaldoRS Жыл бұрын

Thanks man! I was 2 days trying to fix a error in vscode.

@filipemonteiro1962 Жыл бұрын

Olá Rui antes de mais os meus parabens pelo video está brutal, estou com uns problemas, tenho uma Longer LK4 com BL e estava a tentar alterar o Firmware para subir mais a temperatura do Hotend a fim de imprimir outros tipos de material, mas quando carrego o Marlin que altero fica sempre a reiniciar e com a imagem do marlin no LCD, devo estar a fazer algo de errado mas não sei o q!! será que me pode ajudar?? Obrigado

@anastasishav0_038 2 жыл бұрын

I want to change the stepper motor drivers to HR4998 (because my board says H in the sd slot) but i get an error. But even if i compile (with wrong drivers) it doesnt connect with the bl touch.Also if i compile firmware with STM32F103RET6_creality environment it fails.It only works with STM32F103RE_creality

@Zyrano 10 ай бұрын

with the neptune 2 printer it is only possible to enter 16 lines for the wifi password. can this be changed in the firmware?

@GyR_D.e.I.3d Жыл бұрын

Excelente aporte!!!! Saludos desde Argentina. Estoy investigando como actualizar el firmware de mi impresora, y me gustaría saber si hay alguna manera de extraer el firmware de la impresora, es decir, descompilarlo para ver su estructura, modificarlo y volverlo a compilar. El fabricante de la impresora que compre no me facilita el acceso al firmware como para actualizar el hardware si quiero, por ejemplo, agregar otro husillo en el eje z.

@auzzyboy276 Жыл бұрын

Is their a way to remove the beeping noise from the extruder when retracting on the ender 3 max?

@smallnuts2 Жыл бұрын

I was wondering, how do you reset the g code software? After I enter the the marlin software hit configure, then after it says succed. I can't export it.

@user-qc2hg4lk5j 6 ай бұрын

can you please mention the backend logic used to navigate between the screens in marlin firmware

@zk_6312 Жыл бұрын

What are those Environment options about in Marlin Autobuild? I am not sure which one to use.

@DarkRavenProductions Жыл бұрын

for some reason i dont have a compile option

@9494luki 2 жыл бұрын

Great education !;) greetings for you ;D and i must say .. you have a funny name when translating from Polish leangue ;D

@ruiraptor 2 жыл бұрын

Hi, thank you for your comment :) Regarding my name, the first time we noticed that was when we read an article in the news about our goalkeeper's name (Rui Patricio) during the world soccer championship and they mentioned that 🙂 However, here in Portugal is a very common name.

@2ICEdj 2 жыл бұрын

I need help, can someone help me with the firmware of SKR 1.4 Turbo, TMC 2208 UART for a CR10-S?

@adriftincannilove7756 Ай бұрын

How do I define bed size? I’ve made custom part cooling ducts and now I’m 20mm both xy smaller so I keep crashing machine…. 😢

@samsman007 Жыл бұрын

Compiled successfully but it's just not working on the printer! All I changed was the Bed_MaxTemp. Have to revert to stock firmware.

@richardepps8500 Жыл бұрын

So I've tried to compile marlin and it compiles but none of the changes take effect... I'm trying to see enable "filament runout sensor". I'd enabled the advanced park and pause. The firmware runs on my ender but no changes? Help

@philliphaley1241 Жыл бұрын

great video pity you didnt show an upload process

@ggpp4536 2 жыл бұрын

😥 Hi, one question to ruiraptor: I have installed a BIGTREETECH SKR Pro V1.2, I am preparing a 3 colors Mix print. Problem: When I test the motor steppers then after the motor has finished running soft does not Return to Menu but it crashes and resets. The same for another BIGTREETECH Octopus V1.1 mainboard. Do you know this problem please ? Thank you very much, gg

@subarududewrxt 2 жыл бұрын

I doesnt show that little check mark for me

@Christopher040601 6 ай бұрын

I am getting x5 "filenotfounderror" How would i go about fixing this kind of error

@funtimeandinbwen8376 Жыл бұрын

For some reason my x and z motor move together and I can’t home or else it hits the edge

@rcracerguy76 8 ай бұрын

can't find my motherboard in the pins.h. says unknown environment custom board

@dgrimaldo2008 2 жыл бұрын

Firstly, this video is much more helpful than any other I have been referred to. I do have a problem. When done changing the thermistor type to '1047' and max nozzle temp to 500C, I checked the .ini and pins.h as mentioned in the video. However, I am not getting a checkmark to compile. Anyone else have that problem?

@daylenjackson9996 Жыл бұрын

I am. When I try the alternative of going to "Terminal" and "Run build task", it can't find any build tasks. Did you find the solution to the problem?

@umeshjawalikar4913 2 жыл бұрын

i am technical person, if i want to add extra lcd panel ,is it can be ?

@Ithacska 6 ай бұрын

What configuration should i select for Tronxy D01 this printer seems to be abanadoned by everyone ^^'

@TheNegroku 8 ай бұрын

What if there isn't a config file for my printer. I have a CR-5 Pro Creality brand.

@cristinegomez8177 2 жыл бұрын

Great video. Is there a way to increase the number of points for mesh bed leveling?

@ruiraptor 2 жыл бұрын

Hi, yes you can edit the number of points in the configuration.h config file here: "define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited."

@bobalay Жыл бұрын

Thanks, Awesome tutorial! It has helped me compile my firmware. I do have a question tho, I've watched this video over a dozen times pausing playing backing up and watching again and I'm able to compile my ender3pro crtouch firmware successfully every time but when I try to flash my printer it doesn't flash. The screen remains blank. I rename the firmware each time and I'm using the SD card that came w/ the printer. If I flash w/ older firmware it works but then I try my own firmware I get the same result a blank screen. What am I missing?

@ruiraptor Жыл бұрын

Hi Bobby. Try to keep the name firmware.bin and chek if, after the pwoer cycle, the file changed from .bin to .cur. This is an indication that the board installed the new firmware and (if the screen does not show any info) you might have something wrong in your firmware setup.

@bobalay Жыл бұрын

@@ruiraptor Thanks, that worked. I renamed it firmware11062022.bin and it flashed. That's all set, but it's not homing and the Z won't even lower. I can only raise the z offset which it's almost completely at the top now but if I try lowering it doesn't move. I have use the zrod to lower it.

@ruiraptor Жыл бұрын

Hi Bobby, do you have any leveling sensor installed (or enabled one in the firmware)?

@bobalay Жыл бұрын

@@ruiraptor Yes, I have the CRTouch and it's enabled in the firmware.

@martinriendeau6289 Жыл бұрын

hello i have a tevo nereus equiped with an MKS ROBIN NANO bord 32 bit with touch screen...firmware installed is : mks robin nano v 1.0.1 ..it works fine like it is ,,,but i want to be able to acces motion settings on screen ,,and also i have to edit wifi and filament sensor settings for it to work ,,,,is the marlin v2.0.0 is compatible or i should stick with mks firmware,,,,and please tell me the procedure to edit firmware with ,,visual studio , i dont have the tool bar at the bottom and did not found the way to compile,,,,,also can i edit ...txt files ??? into .bin files ....i also have experence with a tevo tornado and already edit firmware on this one with arduino software(bl touch and filament sensor added),,,very easy but for the nereus ????it seems to be a lot more complicated

@ruiraptor Жыл бұрын

Hi, On Marlin's website, under the configuration files, there's a folder for the Tevo Nereus which means that it's compatible. Regarding Visual studio, try to install it again and update all the plugins and see if it helps.

@martinriendeau6289 Жыл бұрын

@@ruiraptor thank you very much ....i went on the marlin website ...but i do not find any link s or mention for nereus firmware ,,,under configuration or under download ,,,,,could you narrow the serch for me or i am not looking at the right place ??? is it the 2.0.1 relese

@d3w4yn3 2 жыл бұрын

Enable classic jerk? I thought I was the classic jerk! (joking).... really though, this is a fantastic video and has helped me solve a huge problem I was having after upgrading to a direct drive extruder, which pushed my hot end off the print surface when I move to home position. Thank you so much for this!!!

@ruiraptor 2 жыл бұрын

Hi, glad it helped :)

@jamesballowe1219 Жыл бұрын

On the marlin web site how do I find the firm wear for my Trevor Tarantula Pro? That website is so confusing. Can you make a video on how to download the marlin firm wear for this printer and how to change the extruded feed rate or point me in the right direction.

@ruiraptor Жыл бұрын

Hi James, just download the configuration files. It will be a zip file with many different printer brands/models in there. Just look it up and extract only the ones you need.

@ROCKYBOT-eu6gb 3 ай бұрын

The check mark is not at the bottom for me

@DavidKernmagik62 2 жыл бұрын

I've been trying to edit my firmware for the past 6 weeks. I've done everything in this video to no avail. I either get cpath not found, msbuild not reconized or it showing a ton of errors before I even change anything! and all I want to do is change the min extruder temp from 180 to 120.

@ruiraptor 2 жыл бұрын

Hi, send us an email with the config files and we will try to help.

@DavidKernmagik62 2 жыл бұрын

@@ruiraptor Sent

@ammitimallishwari2818 11 ай бұрын

How to disable endstops

@user-vs7ts8ob5c Жыл бұрын

Hello, tell me please, if you know, there is a need to raise the upper temperature limit for my 3d printer, how to do it correctly in marlin?

@ruiraptor Жыл бұрын

Hi, search for the line "define HEATER_0_MAXTEMP" (for the nozzle) and edit the value for the temperature. Please be carefull when editing this value.

@user-vs7ts8ob5c Жыл бұрын

@@ruiraptor Thank you!

@felurianmasters4369 Жыл бұрын

@@ruiraptor seems noob ish of me. Do I just load .bin file to sd card and load printer then turn on. I have a completed bin file but this tutorial lacks actually installing to board. Am I just being dumb. Thanks in advance

@ruiraptor Жыл бұрын

@@felurianmasters4369 , load the .bin file to the memory card (make sure the memory card is formatted to FAT32 and it's empty), insert the memory card into the printer and then turn the printer on. When turning on, the printer will load the firmware and flash it. Once the update is complete, the .BIN file will be renamed to .CUR and this will be your confirmation that the firmware upload was done.

@felurianmasters4369 Жыл бұрын

@@ruiraptor ya I didn't realize it was that simple. I've since learned 8gb is maximum size of card. I actually learned a ton from this experience thank you. I also just now learned about the cursor file extension from your reply! Thank you! I ended up doing a ton of changes, hard ware and soft ware, I changed the machine name while I was at it to identify the new firmware, but the version of marlin showed up after the flash, so I knew instantly it worked. I had to do firmware on an old machine years back, and I remember it being easier than everyone was making it seem, I didn't have much trouble figuring out a solution, using arduino, I just hadn't realized the new boards flashed themselves on boot from a binary file. This is so clever and quite convenient, I didn't expect it. Thank you very much, your video was very helpful, there was a few questions I was left with before going into this and you ended up clarifying them in this. Gave me the confidence to jump in. Also your fast reply to comment is greatly appreciated! I'll save this video for future reference if someone else needs help. (This is so much easier than the old methods!, everyone should have a 32 bit board if for nothing else this reason)

Жыл бұрын

Hello my friend I need some help in Marlin can you help me

@jayboc5 2 жыл бұрын

when i click on the checkmark, i am getting this message.......... #include errors detected. Please update your includePath. Squiggles are disabled for this translation unit (D:\Downloads\Marlin-2.1\Marlin-2.1\Marlin\src\MarlinCore.cpp). what does this mean and how do i fix it?

@jayboc5 2 жыл бұрын

i figured it out. i had to many characters in the "environment" where the mother board type went.

@TylerHarney 2 жыл бұрын

I don't have that checkmark at the bottom,

@ruiraptor 2 жыл бұрын

In that case, at the top you find "terminal" then click on "Run build task" and press enter.

@victorblandon8996 2 жыл бұрын

@@ruiraptor Same Problem when I click Run Build Task It says No Build task? I am stock here

@daylenjackson9996 Жыл бұрын

@@victorblandon8996 Did you figure out the problem? I'm running into the same thing.

@cjsawinski 2 жыл бұрын

trying to Comple my Jyers firmware to get my hot end to 300c...for the life of me i cant get the "build environment" right or something. Double check Motherboard which I left alone..its Creality_V4, Build environment is _Maple...everything seems to match up but i just get a note that the Build environment isnt compatable... Anyone got any tips for me!?!?!

@ruiraptor 2 жыл бұрын

Hi, send us an email with the config files and we will try to help.

@cjsawinski 2 жыл бұрын

@@ruiraptor oh man that would be such a big help…. What’s your email?? I sent you a Facebook message if you don’t want to make the email address public for the internet world lol.

@MrGsking12 Жыл бұрын

just look allover your page didnt see a video on custom bootscreen you sure if you really made the video can you send me the link ?

@donandtheresa6966 2 жыл бұрын

Good afternoon. I have been trying this multiple times and I always get the same error when compiling. Could oyu please lead me in the correct direction on how to get pass this? Here is the error: #include errors detected. Please update your includePath. Squiggles are disabled for this translation unit (D:\Firmwares\Marlin-2.0.x\Marlin\src\MarlinCore.cpp). Thank you for your help in advance.

@ruiraptor 2 жыл бұрын

Hi Don, Is your platformio/visual studio code updated to the latest version? Check this and see if it helps: stackoverflow.com/questions/45583473/include-errors-detected-in-vscode

@als1023 2 жыл бұрын

You may need to put your marlin folder in the C: directiry, not below in another folder. I got this wrror when the Marlin folder was too far down in the directory tree.

@jayboc5 2 жыл бұрын

well either the updated firmware files are different and this video explanation doesnt work on them or i am doing something wrong. however i have downloaded your pre compiled firmware from your page and it still didnt work. this sucks.

@ruiraptor 2 жыл бұрын

Hi, why doesn't it work? What error do you get?

@jayboc5 2 жыл бұрын

@@ruiraptor i don't get an error message. once the board is flashed, i hit the auto home and it only goes up. then i reversed the motor like you said in my past message and then it only went in the opposite direction. i also asked you if the fact that i have a dual z rod set up on my ender 3 max make a difference but you never responded.

@ruiraptor 2 жыл бұрын

Perhaps is better to contact me by email so that you can send me all the information i need to help you.

@jayboc5 2 жыл бұрын

well i got the firmware to install but now my nozzle will move up but not down............sigh. im sure i followed all your instructions. how do i fix this?

@ruiraptor 2 жыл бұрын

Hi, try changing the direction of the Z axis stepper motor in the firmware.

@jayboc5 2 жыл бұрын

@@ruiraptor will that work even if i have the dual z bolts?

@jayboc5 2 жыл бұрын

@@ruiraptor i tried it and it was still the same result. i dont know why it wont work for me........... so frustrating

@dustin1albright 6 ай бұрын

What do I need to select if the thing I'm trying to install is not listed? kzfaq.info/get/bejne/n9iVZ72UprvXmnU.htmlsi=uhaSV6uIccHMilq5&t=190

@user-kx8oy2kk9b Жыл бұрын

!!!!!!!!!!!

@_specialneeds 8 ай бұрын

If you have a Digi device controller chip you cant do anything in this video.

@csselement Жыл бұрын

All I'm trying to do is raise the hotend temp limit. What a pain in the ass!

@chasgiv4 2 жыл бұрын

lol, "Marlin is very user friendly." Only true if someone already made a video on how to do what you want to do. Otherwise it's a complete crap shoot of insanity.

@bobp5776 3 ай бұрын

wtf

@pintail120 20 күн бұрын

thanks for showing us how to install visual studio - NOT !!!

@melbatoast1985 Жыл бұрын

you a porkchop?

@bronkodonko5638 Жыл бұрын

Hi can you please tell my why I do not finde in examples my Cr10s Pro V2 printer?

@fvheel Жыл бұрын

I have the Orbiter Extruder installed. On the productpage they give you a "Recommended firmware configuration". Only one problem. My controllerboard run with Marlin firmware but the "Recommended firmware configuration" is for Reprap firmware. So i try to figure out what the settings are in Marlin but i can not find the correct settings. This is what i shoud configure in the firmware: ---------------------------------------------------------------------------------- Recommended firmware configuration: Steps: 690 steps/mm @ 16 micro-stepping Acceleration: 600 mm/s^2 Maximum instantaneous speed change (jerk): 300 mm/min(RRF), 5 (Marlin) Maximum speed: 3600 mm/min Pressure advance: 0.02s Retraction: ~1.2mm Retraction speed: 60mm/s Motor current: 0.5A Peak or 0.35A RMS ---------------------------------------------------------------------------------- Can anyone direct me to the correct lines (using stock Marlin Marlin-2.1.x.zip)? If i could have a linenumber with a copy of the line and the correct values then i would be very thankfull. I did write the maker of the Orbiter about this but didn't get an answer back until now.

@red_juan 2 жыл бұрын

Help needed please, In my Auto Build Marlin page the environment I need isn't showing how do I do? I have an BTT Octopus Pro V1.0 stm32f446

@ruiraptor 2 жыл бұрын

Hi, that board was only included in the latest marlin version. Are you using the latest marlin version?

@red_juan 2 жыл бұрын

@@ruiraptor I'm using Marlin 2.0.9.2

@red_juan 2 жыл бұрын

@@ruiraptor I've changed to 2.0.9.3 and I'm seeing different results, I'll report back when I make it. Thanks a lot

@red_juan 2 жыл бұрын

I had issue with the serial port in configuration.h, It set by default to 0I set it back to 1 and it works fine, thank you so much for the help, sorry for bothering you

@ruiraptor 2 жыл бұрын

No problem ;) Glad you git it working.