How To Compression Test A Diesel Tractor

Рет қаралды 27,540

Күн бұрын

This is how to compression test a diesel engine tractor. Compression testing a diesel engine is different than a gasoline engine. Diesel engine compression tester gauges read a much higher pressure. A regular gasoline engine compression tester gauge won't work! TOOLS USED ↓↓↓↓
➤ Yanmar Tractor Rebuild Series: • Yanmar Tractor Rebuild
Timestamps:
0:00 Intro
1:00 Harbor Freight
2:17 Compression Gauge Review
4:58 DIY Compression Gauge Fitting Adapter
5:49 Injector Installation
6:41 Cylinder 2 Test
8:44 Cylinder 1 Test
9:30 Where To Find Compression Gauges
10:14 Outro
Diesel Compression Tester Kits:
➤ Diesel Engine Compression Tester: amzn.to/2TD2dEl (Nearly Identical Kit)
➤ Diesel Engine Compression Tester Kit 2: amzn.to/3e7NZTI (Different Style)
***Make sure the diesel compression tester kit you get has the right adapter you need for your diesel engine!***
✱✱✱Tools Going To Be Used In This Build:✱✱✱
Ingersoll Rand Air Tools:
● Impact Wrench: amzn.to/38n6Qao (I Own)
● Air Ratchet: amzn.to/3awlo9t
● Air Hammer: amzn.to/38I6sne
● Die Grinder 90°: amzn.to/2NJrb1O (BEST made)
● Die Grinder 90°: amzn.to/2NMcniV (I own)
Air Fittings:
● Milton V High-Flow Air Fittings: amzn.to/2J0PofR (BEST air fittings made!)
● 3/8" Air Hose Reel: amzn.to/3av4jg8
● Air Regulator/Filter: amzn.to/36mNpgA
Hand Tools:
● Long Wobble Impact Extension Set 3/8": amzn.to/331jHxG
● Metric and Standard Socket Set 3/8": amzn.to/2WQ0s7F
● Metric Impact Socket Set 1/2": amzn.to/2Ra5HgK
● Standard Socket Set 1/2": amzn.to/2G51Jzw
● Gearwrench Ratcheting Wrenches: amzn.to/2tBdnj4
This is a late 1970's Yanmar YM2000B 2WD diesel tractor.
The engine on this tractor is a Yanmar 2TR20-A.
These old diesel tractors are built simple and built to last!
As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 36

@MattsShop 2 жыл бұрын

Hey Yall! Links to tools used in the description! Timestamps: 0:00 Intro 1:00 Harbor Freight 2:17 Compression Gauge Review 4:58 DIY Compression Gauge Fitting Adapter 5:49 Injector Installation 6:41 Cylinder 2 Test 8:44 Cylinder 1 Test 9:30 Where To Find Compression Gauges 10:14 Outro

@mikeboccasini4166 2 жыл бұрын

Great video for helping others lose the fear of testing. The resulting numbers of your test would indicate a serious failure as we all know you cannot “wear” an engine down to those compression levels as it would not start at even higher numbers than you got on your gauge. So either your testing device/ configuration had flaws or like I said earlier major failure possibly cracked pistons even. One gentleman questioned the compression release and you mentioned it was disconnected. I still would have toyed with it while cranking to see what effects it may have had as well. Enjoyed your vid!

@brad750 Жыл бұрын

Thank you for making this series. I just bought a ym2000 non running. I’m excited to get it going.

@MattsShop Жыл бұрын

You're welcome! It will be worth it. The YM2000 is the best/easiest to rebuild.

@JamesSmith-sj5yi 4 жыл бұрын

Looking forward to the rebuild. Hope you get it running.

@MattsShop 4 жыл бұрын

Thx. I will!

@terrellscaife2411 2 жыл бұрын

Sounds awesome buddy

@gccarcit 4 жыл бұрын

Nice Matt

@MattsShop 4 жыл бұрын

Thanks

@detroitdiesel-vu3ig 4 жыл бұрын

I just picked up a Yanmar 2210 with that same 2 cylinder diesel motor. It needs a head gasket as far as I can tell which shouldn't be too difficult to replace, especially for the price I payed for it

@MattsShop 4 жыл бұрын

It should be pretty easy to do. A head gasket is pretty cheap if that's all it is.

@TomM60 2 жыл бұрын

I have a John Deere 430 garden tractor with a 3 cyl Yanmar engine in it. It doesn't have the power that it use to have so I am thinking maybe a blown head gasket. I'm not sure though. I'll have to get one of those compression testers but it looks like the tester you bought will work in the glow plug hole. The vintage of my tractor is the first year they came out in 1984. I also know the water pump isn't pumping coolant in the engine and I have already bought that. When I start the motor, and it does start very easily, I get a puff of white smoke then it runs clean. Does that sound like a head gasket to you? This is the first time I've ever worked on a diesel engine before. I'm not sure I know what I'm doing but I guess I'll figure it out as I go. I have also put in a new thermostat and that didn't help anything.

@MattsShop 2 жыл бұрын

It doesn't sound like a head gasket to me. Have you adjusted the valves? That is somthing that needs to be done as maintenance. Is there water in the oil?

@jacobsadventures8299 3 жыл бұрын

Hey check that decompression lever I’m thinking that something is messed up what it

@MattsShop 3 жыл бұрын

Nahh, I disconnected it.

@yvens001 6 ай бұрын

I would re test with a deferent compression tester. Those pittsborough tester are horrible

@MattsShop 6 ай бұрын

I guess this one was pretty good. The engine was blown 🤣

@headpainter1 2 жыл бұрын

I just looked at harbor freight website and my local store. Evidently item 62594 has been discontinued. Could you confirm that adapter size? Thanks a lot. I thought someone said it was like 19x1.5 or something. Not sure.

@krstoner53 2 жыл бұрын

The same set is currently being sold on Amazon by upstreet for $34.95 called Shankly brand I will post size and details in a few when at shop

@headpainter1 2 жыл бұрын

@@krstoner53 ordered it. Thanks a lot!

@krstoner53 2 жыл бұрын

The fitting Matt used in my kit from Amazon is #4 on parts list it is called 1/8” NPT quick coupler BTW this kit is a combination of SAE and MM for foreign and domestic I went through the top of injector instead of side on mine. Here’s how I did. I first took a #7 adapter m12x1.25F-m18x1.5m I sawed off about a quarter of an inch so it wouldn’t bottom out then put a 45 degree angle on it with a 1”x30” belt sander then I used a flat washer between this and my next fitting #6 m12x1.25(m)-7/16”-20(m) adapter next I used #15 7/16”-20m-7/16”F -20 which is the 90 degree fitting next was #5 7/16”-20F which has the coupler you hook to your gauge. To block off the side I used a 1/4”NPT M to 1/8”NPT F reducer bushing like Matt first used but I used a 1/8” M plug instead of the #4 fitting that he used. I also used a heavy grey Teflon tape on the first two fittings coming out of the injector and plug on side

@headpainter1 2 жыл бұрын

@@krstoner53 what engine were you working on? The 3 cylinder yanmar? That's what I have. I got the top half of one of the injectors unscrewed but debated just trying to see if I could put gauge right where fuel line attached but thought maybe pressure reading would be off because of tiny injector orifices. . I'll look at your reply a bit closer when I get the kit and the tractor in front of me. Thanks.

@krstoner53 2 жыл бұрын

Your welcome! Mine is also a 3 cyl YM2220D and I have the same style injectors on my JD900HC also a 3 banger but a different style is on my JD790 which is also made by Yanmar and a 3 cylinder. Is yours the same style as Matt’s in this video? I presumed it was. If so I would gut it as he did so as not to damage the internal parts and give it a good cleaning especially the orifice. As Matt said earlier they used this style in many different models. Look at his video on injector cleaning. I left a comment how I did mine under a Jonathan, If your having trouble removing your injector from tractor this might help.

@Alanthe918mobilemechanic Жыл бұрын

The Maddox ones work better or the icon one don’t get the Pittsburgh one

@600dominator 3 жыл бұрын

H i it might be worth noting a proper adapter has a fairly small hole up through it and should be roughly the shape and size of your original injector to get a more accurate reading. Using your setup changes the compression ratio far too much to give a good reading.

@MattsShop 3 жыл бұрын

It seems like the same amount of pressure gets to the gauge. Exactly what do you mean?

@dapetik 3 жыл бұрын

You're essentially adding volume to the cylinder with that hose. I would think that would reduce the compression ratio a tad and probably cause a slightly lower psi

@motorbyclist 2 жыл бұрын

@@dapetik that's what the Schrader valve is for otherwise the tester is useless as he explained. There is also a small effect from the missing injector body but the test is still indicative regardless

@davesaam4308 3 жыл бұрын

Could you start the engine with that compression?

@MattsShop 3 жыл бұрын

Nope! I'm rebuilding the engine for part 4 of my series.

@rexsmith6495 2 жыл бұрын

You have something not correct, even with carboned rings etc you should get much better test, outside of hole in piston ,something radical your test should be better result

@MattsShop 2 жыл бұрын

Yes, there has to be internal engine damage when you get readings this low.