Broken Gauge? FREE FIX! WILL IT WORK?

Рет қаралды 169,748

5 жыл бұрын

How to fix an oil pressure gauge in your car if it's broken. This free fix might fix your broken oil pressure gauge, fuel gauge, speedometer, or voltage gauge! Instrument clusters are expensive and hard to replace. If your instrument cluster gauges need to be fixed, watch this! PARTS BELOW!:
Magnets:
● Magnets I used: amzn.to/2Ui9LKR
● Extremely strong magnets: amzn.to/2GX2NrD
--------------------------------------------------------------
● Instrument Cluster LED Bulbs: amzn.to/2tNE94f
--------------------------------------------------------------
This is a 1998 Ford Ranger 4.0 OHV.

Пікірлер: 136

@MattsShop Жыл бұрын

Links in the description to magnets for this trick! Strong neodymium magnets work best for this. It might take a couple tries, but this works great! As an Amazon Associate I earn from qualifying purchases.

@gmichie1 Жыл бұрын

I had the very same problem. Auto repair place quoted $700 because they would have to remove the panel and send it to a certified repair place. They said it had something to do with the odometer. I used the 25 pound telescoping magnet from Harbor Freight that I already had. I took me longer to disassemble the magnet from the pole then to fix this issue using this method. Be sure to put the magnet behind the needle and push it and twist the magnet as you go around. It took 20 seconds to swing the needle around and tested it successfully.

@soup.p 2 жыл бұрын

Oh, I need to do this to my mom’s car! 😄 thx for sharing!

@markkaplan2133 11 ай бұрын

Nice! Just fixed mine. It took ten seconds. Perfect. Thanks.

@catherinekeagy2699 2 жыл бұрын

Omg!!! It worked for me. I’m so grateful to you. 💕🤗💕 I had my oil changed and a new battery put in and when I picked up my car The gas gauge was not working!!! I called them and they said bring it back in and leave it again!!! I’m done with them. Thanks again. Made my week. 🎊🎉

@MattsShop 2 жыл бұрын

You're welcome!! They don't believe me!!

@lmtwa 3 жыл бұрын

Incredible! I changed the sending unit with temp help - Then - after the needle pegged "underneath" the stop, I reverted to the magnet - went identically to your video - and the guage began to operate normally - we'll see how long it lasts - 8-4-2020

@MattsShop 3 жыл бұрын

I know! It blew my mind too.

@fozrockski 3 жыл бұрын

It worked for me. Thanks for the tip!

@MattsShop 3 жыл бұрын

Awesome!

@marcusfoxworth7094 3 ай бұрын

Believe it or not it just happened to be a day ago. And I didn't know what to do just do the next step and go inside the dash board. Until I went on KZfaq and seen your magnificent trick with a magnet and it damn sure working like a charm. Thanks my friend for the awesome technic.👍👍👍👍👍👍

@robertmeyers2770 2 жыл бұрын

Badass brotha! Definitely going to give this a shot!

@MattsShop 2 жыл бұрын

Give it a shot.

@raybdavisjr 2 жыл бұрын

Great trick. My case was a little different in that I had no peg to get stuck on, and it was past 80 on the gauge after an oil change at Oil Well (it's an old car so not blaming them). So I used your magnet trick to put it down as close to zero as I could get it, and it did float up to about 40. But the next day I started and and the needle went down to zero on startup, and then up to about 50 which is where it always ran before the oil change. Now it seems to be running correctly. Thank you.

@hithereperson8137 9 ай бұрын

Shit dude just leave it. Now you feel GREAT about your oil pressure

@henrybermudo6894 2 жыл бұрын

You're a genius!!!

@capturemediainc8763 4 жыл бұрын

Alright bud, neat trick. It worked on my oil gauge so you got your thumbs up. Got a trick for the speedo? Same problem. When I changed out the bulbs it fell to the other side. I was hoping not to have to take it apart again.

@MattsShop 4 жыл бұрын

I don't know about the speedo. Probably have to take it apart and fix it.

@vashtiadajen7718 2 жыл бұрын

Wow ...just wow. Thank you

@raysaviationlife7623 Жыл бұрын

Definitely trying this out anytime from now when they return my car,my fuel gauge stuck on zero

@juliesmith5948 2 жыл бұрын

It worked!!! I tried it today & it worked!!! Thank You😋

@MattsShop 2 жыл бұрын

You're welcome!

@larrybrooks3788 Жыл бұрын

Great job

@lucaizan8722 Жыл бұрын

It helped me a lot

@kylewick2818 3 жыл бұрын

Theres a key on and off sequence for some models that are programmed to "sweep" the needle back over it's a "reset guage needle" function, my wife's jeep the speedometer needle flipped over when she turned the key over, literally fixed it in 30 seconds using the sequence, only ever had to do it once way back so dont remember what the sequence was but I found it on a forum

@MattsShop 3 жыл бұрын

Woah, that's really good to know! I'm sure that trick won't work on a old truck like this though.

@reeseowens2182 10 ай бұрын

That was so awesome, does it work for the gas guage as well???

@lizzettegonzalez6879 Жыл бұрын

Awesome!!!!

@timdryden3778 Жыл бұрын

Cool trick, that being a ford, in this application, that is not a pressure "gauge", it's a low pressure light with a sweep hand instead or a light. check the wiring diagram, it will have only wire at the sending unit. On or off. The needle does not show more "pressure" when engine speed is increased. Still a great fix.

@MattsShop Жыл бұрын

A lot of people keep saying this. I need to check that. Pretty crazy, always thought it was a gauge.

@joejizel5979 Жыл бұрын

Never knew that but have noticed that they are usually halfway or nothing, makes sense.

@jagalasso 10 ай бұрын

Yes it will show a higher level when engine rpm is increased... That's basic knowledge

@chasesmith8679 2 жыл бұрын

That was awesome man my gas hand is stuck on e even though I have a full tank

@jameslee2881 6 ай бұрын

Fantastic job

@MattsShop 6 ай бұрын

Thanks!

@dianeirving1299 3 жыл бұрын

My 2006 trailblazer has the same issue. I’m gonna go outside and try it now! God bless you if this works! Thank you so much for sharing

@MattsShop 3 жыл бұрын

You're welcome! Let us know if it worked!

@hmmm.7778 2 жыл бұрын

Cool trick!

@MattsShop 2 жыл бұрын

Thanks!

@ericthomas7474 3 жыл бұрын

Thanks again for me to... Worked

@MattsShop 3 жыл бұрын

AWESOME!

@roseulrich3779 Жыл бұрын

Good job!!!!

@MattsShop Жыл бұрын

Thanks!!

@charlenemclean 2 жыл бұрын

Thanks

@TattooedRobot 3 жыл бұрын

I Can't believe this worked for me! Thanx!

@MattsShop 3 жыл бұрын

You're welcome!

@tedwilliams6982 3 жыл бұрын

What kind of magnet

@MattsShop 3 жыл бұрын

Any kind, stronger the better.

@lkernsjr 11 ай бұрын

That was legit increds!!

@micahisaac 3 жыл бұрын

God bless you sir

@WSVK420 2 күн бұрын

Dang I need to try this 😅

@DavidLDFL Жыл бұрын

so why isn't this affecting any of the other needles? I could imagine this might cause induction current to flow in the little electric motors, or these are likely magnetic drag indicators, but none of the other ones move when you're right next to them.

@ladywilson292 Жыл бұрын

My mom 2005 Chevrolet Venture gas Guage and water temp Guage are malfunctioning. The gas needle is way passed the E. There is no needle level stopper like yours. The fuel pump is new. Any suggestions? We already tried the magnet method.

@cesardeluna4560 11 ай бұрын

Thanks brother 🙏

@MattsShop 11 ай бұрын

Any time

@hilalbai3666 Ай бұрын

Thanks man

@MattsShop Ай бұрын

You're welcome!

@angieengle7064 Жыл бұрын

How about if the gas and temperature gauge is on E and Lowest setting for the temp

@gunfisher4661 3 жыл бұрын

Flipped mine about a year ago but it flipped back once latter still easy fix, then ended up replacing cam sensor and IAC valve and never did it again.

@MattsShop 3 жыл бұрын

Probably the little wire/connector was loose, and you got a better connection messing with it.

@terryj1014 Жыл бұрын

I don’t doubt that the magnet repositioned the needle but that doesn’t mean that the reading is correct and that there is proper oil pressure. Why did the needle go around to the wrong side of the peg in the first place!

@catherinekeagy2699 4 ай бұрын

3:21 thank you again!!!

@virginia8beach8man 3 жыл бұрын

This worked for me. It was the second time that I did it before it took.

@MattsShop 3 жыл бұрын

Nice!

@jimbo398a 9 ай бұрын

Just fixed the fuel gauge on my 2002 S10 Blazer. I used a magnet from an old microwave oven. just put the magnet over the gauge and wow took 30 seconds.

@marcusfoxworth7094 3 ай бұрын

Also I wanted to add. The trick was performed on 2003 ford explorer sport XLT

@mattgameplay6477 2 ай бұрын

Thank you ! 2024 and this video still helpful

@MattsShop 2 ай бұрын

You're welcome!

@alleshiahinton8906 2 ай бұрын

IT WORKS ❤

@MattsShop 2 ай бұрын

Awesome!

@bethmccall3735 3 жыл бұрын

Can you use a magnet to fix a broken fuel gauge on a 2002 Chrysler PT Cruiser Touring?

@MattsShop 3 жыл бұрын

Try it and see! If your fuel sending unit is bad. It won't work though.

@johnpaulnava7292 2 жыл бұрын

ima try that on my 2003 ford ranger same problem..as yours..going to buy magnets in the morning. would it work for gas gauge??.I will comment results...definite geniuse move...thx

@MattsShop 2 жыл бұрын

If the gauges are flipped like this it should work on the gas guage with the key off.

@patrickkennedy6886 6 ай бұрын

drill a small hole in the plexy glass. then take a paper clipe and push it back up that way

@MattsShop 6 ай бұрын

It's already got a hole

@cassievaughn8475 16 күн бұрын

Wow..Thumbs up for real

@MattsShop 16 күн бұрын

You're welcome 👍

@lesegoyv 2 жыл бұрын

Guess work😅 He wanted it to work, I also wanted it to work, it worked then he said he can't believe it worked 😅😅😅 On my way to purchase a magnet. Thanks buddy

@Billygoat808 8 ай бұрын

In hawaii, we say "Maika'i", which means clever or smart. We also say "Mahalo", which means thank you very much. 🤙🏾

@MattsShop 8 ай бұрын

Love that! You're welcome!

@roostercogburn597 3 жыл бұрын

Can anyone find a comment that could possibly help this fella out. like the first one that pops in your head lmao

@MattsShop 3 жыл бұрын

Show some love!

@suhaimizainol1805 2 жыл бұрын

Im going to try this method soon... is there a magnet in every fuel meter?

@MattsShop 2 жыл бұрын

Idk there are little motors behind the gauges with magnets in them so probably.

@jimmyathegreek3098 3 жыл бұрын

I have a powerful magnet but the dash glass is too far from the needle any suggestions

@chriscusick6890 2 жыл бұрын

Double up the magnets.

@EggersEggers-pd6te 2 жыл бұрын

That's great, for a stuck needle. What about a needle that's constantly all over the place while driving?

@MattsShop 2 жыл бұрын

The fuel sending unit in the tank is most likely bad.

@EggersEggers-pd6te 2 жыл бұрын

@@MattsShop Cool. I'll check it out. Thanks. 👍

@francesparker1782 2 жыл бұрын

Does it work with a gas gauge

@scottfrye5535 3 жыл бұрын

My speedometer was stuck i got a ice pic got it hot push throw plastic made a small hole got a pipe cleaner this works.

@MattsShop 3 жыл бұрын

Lol a melted hole in the plastic would drive me crazy!!

@JRobert111111 Жыл бұрын

Gotta love those Ford oil "pressure" gauges, which they're indeed not. If you notice they go to one position only when the car is running, even if the engine is barely running, it will show the same reading. This is due to multiple class-action lawsuits against Ford for low oil pressure readings. So for decades, this "pressure" gauge is only a "switched gauge" and is either on or off, nowhere inbetween.

@kiyosenl.3889 2 жыл бұрын

Yooooo im not the only person to do this to their ranger lol, i didn't look for this i just came across it lol

@MattsShop 2 жыл бұрын

Thank you! They are saying this is fake smh.

@scotquigley513 3 жыл бұрын

Got any quick fixes for gas gauge not working?

@MattsShop 3 жыл бұрын

It's probably the fuel sending unit that is bad. This won't fix that.

@chasesmith8679 2 жыл бұрын

Does that work for the gas hand too or is it truly a gas tank issue

@reeseowens2182 10 ай бұрын

Yes I was trying to see if it works for the gas guage as well

@jahmey 2 жыл бұрын

Sheeeesh 🔥

@RoverIAC 2 жыл бұрын

not sure this is going to work on my 1970s tech but thanks anyway.

@Taylor-jq6rl 3 жыл бұрын

in speedo u need to change speedo cable

@MattsShop 3 жыл бұрын

Yup, it won't work on that.

@ahmedsaid886 5 жыл бұрын

Thumbs up to you. Lol

@vicabramov8983 Жыл бұрын

does it work for the colt gauge as well?

@MattsShop Жыл бұрын

Idk???

@mikespencer3824 Жыл бұрын

What kind of magnet did you use. Where do I get one?

@MattsShop Жыл бұрын

Neodymium bar magnets work best. Wrap it in a rag so it won't scratch. Amazon

@mikespencer3824 Жыл бұрын

@@MattsShop , thank you

@willieburnett130 Жыл бұрын

Thank you. I fix my truck

@MattsShop Жыл бұрын

Great!

@petavaleli-malaeulu487 3 жыл бұрын

Do I on the key at the time that I fix it or turn it off

@MattsShop 3 жыл бұрын

Pretty sure I did it off.

@M.Arbogast Жыл бұрын

Will this work with temp gauge

@MattsShop Жыл бұрын

Maybe!

@pierroboateng2720 Жыл бұрын

I tried but didn't work please

@Thankful677 2 жыл бұрын

I have a question can you help

@MattsShop 2 жыл бұрын

Sure, about what?

@jesusisoursavior2682 Жыл бұрын

is it work in new genaration car

@MattsShop Жыл бұрын

Prob not

@motorcity429 Жыл бұрын

Looks like you suffering from limp needle syndrome it's pretty common easiest way to fix it is put the car in neutral and red line it five times

@raycert07 Жыл бұрын

My glass is slanted, and I don't have a strong enough magnet. Sad.

@MattsShop Жыл бұрын

Yup, that's when you do the zip tie trick...

@raycert07 Жыл бұрын

@MattsShop and what might that be? My glass is sealed right up to the edge. It sucks. I'm trying to get my boost gauge to work and it's stuck below the normal range. Not even my strongest magnet stick can get it to move behind the glass, and removing that glass means you gotta remove the whole dashboard.

@bobg3221 Жыл бұрын

To bad someone already did this trick long ago now let’s see you pull a motor and redo timing chain guides? Didn’t think so. Sorry not trying to be rude. But there’s actually a lot of people that actually knows about this trick especially on Fords

@jrmadkison7343 11 ай бұрын

Yes but u r rude he's just showing the rest of the world that doesn't know. Why dont you go fly kite u rude mfer. Let's see u not being rude sorry didn't think so. Hey everytime u think your big man on the block trust me there's always someone bigger and tuffer than u lemon head. Nesc time watch ur ps and QS pin head.

@ritalines8139 9 ай бұрын

Yes and alot that don't know it😊

@firstlast--- 6 ай бұрын

I've rebuilt engines and done timing jobs. I had no idea about this trick. It's going to work great on my recently purchased ranger that has a bad engine. Don't be so hateful!

@Koyokochotl 3 жыл бұрын

Fucking choice haha

@jimsinnovations2737 3 жыл бұрын

HA, go figure!!

@MattsShop 3 жыл бұрын

Works great

@jimsinnovations2737 3 жыл бұрын

@@MattsShop ya I told another guy on another channel about it, and he laughed at me an basically made a joke of it. Like I'm so dumbass lol. Work easier not harder. Haha

@MattsShop 3 жыл бұрын

Yea, I learn a lot from my comments.