MDT LSS-XL GEN2 Chassis System

MDT LSS-XL GEN2 Chassis System - Install

Рет қаралды 68,705

3 жыл бұрын

Installation and general overview of the MDT LSS-XL GEN2 Chassis System
--
More product information at mdttac.com/lss-xl-gen2-chassi...

Пікірлер: 113

@billehhancey6429 3 жыл бұрын

Wow this is much faster than I was worried about! Great timing too! Just ordered this chassis for T3x today.

@MDTTAC 3 жыл бұрын

Perfect, it's a great way to go!

@jordonmcwilliams9006 2 жыл бұрын

I’ve had a 700 for a few years now and I’m absolutely going to get this chassis. Great price and looks great. Heard amazing things about the quality can’t wait to try it out

@jeffhoberg Жыл бұрын

Josh is awesome, just helped me out big time. Love my MDT. Highly recommend!

@patthis 3 жыл бұрын

Lol... I just called about this set up yesterday... thank you guys 👍

@ahaywood89 3 жыл бұрын

Perfect timing lol. My LSS-XL gen 2 came today. Dropped straight in, no problem with my Savage 11 Hog Hunter. I got the fixed interface with a fixed to carbine lock plate. Seemed to give overall the shortest length of pull for storage. Also haven't shot it yet but I did cycle dummy rounds and I think it feeds smoother than the factory stock's blind mag.

@Gthemaniac Жыл бұрын

you can use any buffer tube and and adjustable stock as well can you as I have a couple sitting around.

@bigemont Жыл бұрын

Do you have any videos with this being installed on the Tikka T3x ctr 6.5 creedmoor ?

@joshuamolina542 Жыл бұрын

I hope some can help but I have a Savage 110 Tactical .308 24” barrel. Is that a short action or long action? I always have a difficult time telling the differences

@jeffhuett101 3 жыл бұрын

I’d read about some people having problems with their magazines feeding, particularly the Ruger American 300 blackout builds. What I read was from 2016, so I’m hoping you guys have long solved the issue.

@MDTTAC 3 жыл бұрын

It depends on which version of the rifle you have. We currently support the AR magazine version of the rifle in our LSS-XL for a Ruger American short action AR. If you have a rotary magazine we are not aware of a magazine that can feed your combination reliably.

@jeffhuett101 3 жыл бұрын

@@MDTTAC very good to know. thanks for the swift reply.

@MDTTAC 3 жыл бұрын

@@jeffhuett101 No problem!

@martinwechselberger4700 3 жыл бұрын

@@MDTTAC I have a rotery magazine but the stock is able to upgrade to AICS Mags or AR style i guess. My bolt is milled on the underside. I guess there are two versions on the 300 BLK bolts. My plan is to upgrade to the LSS XL gen 2 if possible.

@MDTTAC 3 жыл бұрын

@@martinwechselberger4700 If your bolt is cut for AR magazine then it will fit our LSS-XL for a Ruger American Short Action AR and feed from AR magazines.

@travise8008 2 жыл бұрын

Does this come in left handed for the Ruger American?

@sandflea2424 Жыл бұрын

I see that they are compatible with the Vanguard/Howa 1500. Would that be the same as a mark 5? If not does MDT make a chassis 6lug 6.5 rpm, 9lug 300 wby?

@JustSomeGuyGino Жыл бұрын

Will this work for a Weatherby Vanguard in 30-06?

@rogan9093 Жыл бұрын

Why is the xl $100 more expensive than the regular LSS? is it $100 more for 4 inches of extra fore end?

@ruhurtin4squrtin34 2 жыл бұрын

sorry what is the allen head SIZE to secure the buffer tube? i cannot unscrew in order to lock down the tube as suggested by video? mine is tikka LA version.

@MDTTAC 2 жыл бұрын

If you are referring to the screw that goes into the buffer tube, it is a 5/32.

@gobby9806 10 ай бұрын

Where did you get the tools at

@AlpesVideo 6 ай бұрын

Bonjour. Serait il possible de savoir comment fixer le bipied atlas BT65 sur anneau sous chassis mdt LSS RF ? Merci d'avance.

@greattony7291 4 ай бұрын

Is that Good chassis for .30-06

@reprisalwithin666 2 жыл бұрын

If only there was one of these for the Ruger Ranch 7.62x39. Been looking for a stock upgrade

@MDTTAC 2 жыл бұрын

If you have a rifle that takes Mini-30 magazines then our LSS-XL for a Ruger American short action AR will fit your rifle and convert it to AR-15 magazines.

@reprisalwithin666 2 жыл бұрын

@@MDTTACThank you so much for that information. Yes it takes mini 30 mags. Being Canadian I'll be going for the XCR 10 round pistol mags.

@MDTTAC 2 жыл бұрын

@@reprisalwithin666 Awesome!

@bearfootbowhunter3054 2 жыл бұрын

Do you make a thumb skrew that can be used to toolessly remov the stock?

@MDTTAC 2 жыл бұрын

We do not at this time. However, it is a 1/4-28 thread so you maybe to find something that could work. We also have folding stock adapters available depending on what your goals are. mdttac.com/mdt-folding-stock-adapter.html

@webstermagness5681 Жыл бұрын

How do you get out the bout pin for the Ruger American

@MDTTAC Жыл бұрын

You should just be able to pull it out.

@user-kd1rk7hs4p 3 ай бұрын

wish you guys would put total weight difference between stock and after changing the chassis so we can see the difference

@MDTTAC 3 ай бұрын

Thank you for the feedback; we will note it for the next time we film.

@codyzimmerman2582 2 жыл бұрын

I have the savage 110 tactical in 300 win mag. Is there a difference in the recoil with a fixed stock vs the buffer tube?

@MDTTAC 2 жыл бұрын

There is not any difference.

@user-pe1er8im7y Жыл бұрын

Good time. I am the owner of the Howa HOGUE GRN STK 308 Win carbine. Barrel - 56 cm. Classic budget polymer stock. After watching your video came up with the idea of installing MDT XRS for HOWA 1500 SA FDE. Do you think it makes sense to put an MDT stock on a budget hunting barrel, and how will it look like?

@MDTTAC Жыл бұрын

For sure, it makes sense to upgrade your rifle. With a standard sporter barrel, it might look a bit out of place, but the increase in accuracy far out weighs that.

@romangarza7561 Жыл бұрын

What is that guard/ shield above the barrel in front of the scope? I want that shield if I get this chassis.

@MDTTAC Жыл бұрын

Its our LSS-XL NV hood.

@lukez4133 2 жыл бұрын

The CZ455 has a small mag release lever. Is a extended mag release needed or will the factory one work unhindered!

@MDTTAC 2 жыл бұрын

In our LSS-RF for the CZ 455, it's no problem. In our ACC, we do recommend our extended latch kit. mdttac.com/cz-452-455-457-extended-mag-latch-and-spacer-kit/

@christophermartin2343 2 жыл бұрын

I have a savage 110 with an action screw spacing of 5.062 does mdt make a chassis that will fit that spacing?

@MDTTAC 2 жыл бұрын

That is a Savage long action spacing which would fit our Savage long action chassis. However, if you have an older rifle there could be some things to watch out for.

@trev9177 2 жыл бұрын

Hey MDT I ordered a LSS-XL Gen2 Short Action for my savage axis II 6.5 creedmoor and the holes do not line up at all whatsoever only one hole lines up at a time I contacted you guys about it waiting to hear back hopefully you guys being a good company you are will be able to help me out! Please and thank you! I’ve been wanting to build a rifle with y’all’s chassis’s

@MDTTAC 2 жыл бұрын

We will talk in the e-mail, the LSS-XL is not available for the Savage Axis, likely, you got a Savage SA that won't fit your rifle and we will have to get that swapped for you.

@chavezhead 2 жыл бұрын

@@MDTTAC when did you stop making the LSS-XL for the Axis?

@MDTTAC 2 жыл бұрын

@@chavezhead We haven't offered the LSS-XL for the Savage Axis before, we do have our LSS available though!

@chavezhead 2 жыл бұрын

@@MDTTAC I have a gen 1 LSS for my Axis long action and love it. Obviously I'm mistaken, but I thought at one point about 3 years ago the LSS-XL was offered for Axis SA. Either way your chassis systems are solid and amazing!

@MrLocke-bk3om 3 жыл бұрын

One question: why do I need to remove the factory bolt stop pin on my Ruger American? I have a predator model and everything seems to be working fine without replacing the pin...

@MDTTAC 3 жыл бұрын

The poly stock that came with the rifle sits higher up on your receiver, our chassis sits lower so the pin that holds your bolt stop in, being shorter in the factory configuration can work its way down and out, causing you to lose your stop and spring. We include the longer pin so it cannot work it's way loose and is held in by the chassis.

@MrLocke-bk3om 3 жыл бұрын

@@MDTTAC dang! Great to know, thank you for letting me know. I just bought and installed the chassis and the skeleton stock and I’m loving it so far. Thank you for the guidance

@frankfisher99 2 жыл бұрын

@@MrLocke-bk3om Incidentally my Magpul Hunter stock on a RAR has the exact same issue, that factory ruger pin is just too short. What calibre is your RA and what mags do you use with the MDT?

@mossranchoutdoors7249 2 жыл бұрын

Does MDT have chassis that would work for a 30-378 Weatherby?

@MDTTAC 2 жыл бұрын

It depends on what action you have. If you have a Weatherby Vanguard in 30-378, Weatherby, then it will fit in our How 1500 LA chassis systems without issue.

@SkoalDipper018 2 жыл бұрын

i have bought a sagave axis 2 XP 6.5 is this compatible? thanks in advance

@MDTTAC 2 жыл бұрын

We currently offer our LSS for a Savage Axis SA which will fit your rifle. We may also have some of the ESS for a Savage Axis SA available in limited numbers on our customize page. The LSS-XL at this time is not available for the Savage Axis, we may add it in the future!

@nickbloodsworth4705 2 жыл бұрын

Really wish there was a folding stock interface

@MDTTAC 2 жыл бұрын

There is, we have our folding stock adapters here: mdttac.com/mdt-folding-stock-adapter/

@MrJayBlackwind 2 жыл бұрын

would this fit a 300 PRC Bergara B14 HMR Wilderness ?

@MDTTAC 2 жыл бұрын

Yes, our Remington 700 LA LSS-XL will fit your rifle without issue. Although, we do recommend our ACC, ESS, and HNT26 in a Remington 700 LA 3.850" for your rifle.

@shumardi1 2 жыл бұрын

If you didn’t have a torque wrench and cranked down more than 60-65 in-lbs would that be a bad thing?

@MDTTAC 2 жыл бұрын

Go contact plus a 1/4 turn if you don't have a torque wrench. You can but it's easy enough to get in the ball park.

@fredstevenson25 2 жыл бұрын

Any MDT chassis fit 6.5 Grendel? Howa mini maybe?

@MDTTAC 2 жыл бұрын

When selecting a chassis it's designed to accept certain actions. However, for the Howa Mini, we have the LSS Gen2 and LSS-XL Gen2 chassis.

@HeyItsThattGuy 3 жыл бұрын

Can this be used on the savage axis 308

@MDTTAC 3 жыл бұрын

We currently our LSS for your rifle and our ESS is available for the Savage Axis in limited numbers!

@leeroyphillips 3 жыл бұрын

Do you do anything for a Sako 85 please

@MDTTAC 3 жыл бұрын

We do not at this time, however, make sure you leave us a request! mdttac.com/pre-ordering-information

@garytaylor5646 2 жыл бұрын

Can you add weight to the LSS RF?

@MDTTAC 2 жыл бұрын

Yes, you can add a pair of exterior weights.

@gibsonethirty2836 3 жыл бұрын

I'm still waiting all these last 10 years or so for you guys to get the Ruger M77/22LR/WMR - 17HMR into the LSS-RF (Gen1 and now Gen2) Chassis and the Ruger M77 SA into either the LSS-XL Gen2 or the ESS.......................................................................................and still waiting.

@MDTTAC 3 жыл бұрын

At this time we haven't seen enough demand, make sure you leave us a request! mdttac.com/pre-ordering-information

@gibsonethirty2836 3 жыл бұрын

@@MDTTAC I did, quite some time ago for the LSS-XL Gen1 M77 SA version (10y) ...................................... and about 3 days after you released the LSS-RF Gen1 for a M77/22WMR version ..................................... Oh an btw, that link just goes to a blank page with "MDT Product Request" mid frame that is not a link and there is nothing else.

@MDTTAC 3 жыл бұрын

@@gibsonethirty2836 Thank you for the feedback, the more we get the better. Our website team has resolved the issue.

@jasonhoye2388 2 жыл бұрын

Hi would this suit a t3 sporter barrel or they just meant for varmint heavy barrels...

@MDTTAC 2 жыл бұрын

It will work with a sporter barrel without issue.

@jasonhoye2388 2 жыл бұрын

Thanks for ur reply... just not sure how the t3 lite sporter barrel would look as the forearm recess is quite wide.....

@kristijanmedved6066 2 жыл бұрын

Can you install Hnt 26 chassis?

@MDTTAC 2 жыл бұрын

We will be doing an HNT-26 video soon, but the process will be very similar. There are instructions included as well in the box on the HNT-26.

@truemizou40 2 жыл бұрын

Does this work with the Remington 783? I only saw the option for the 700.

@MDTTAC 2 жыл бұрын

Hello! We offer our LSS for the Remington 783

@truemizou40 2 жыл бұрын

@@MDTTAC Crazy fast reply! Holy smokes! I just bought the LSS chassis, wood grip, & the SCS lite stock. Thanks for clarifying, can't wait for them to come in!

@MDTTAC 2 жыл бұрын

@@truemizou40 no problem, we hope you enjoy the new setup!

@logangrieger6426 Жыл бұрын

Will this work for a ruger American predator in .243?

@MDTTAC Жыл бұрын

Your rifle will fit in the LSS-XL Gen2 chassis in the Ruger American SA inlet without issue.

@logangrieger6426 Жыл бұрын

@@MDTTAC thanks

@adamknutson7885 3 жыл бұрын

Have u done one for the rugar amrican on the lss xl gen 2

@MDTTAC 3 жыл бұрын

For sure, in stock and ready to ship! mdttac.com/lss-xl-gen2-chassis-system.html

@adamknutson7885 3 жыл бұрын

I ment a video on installation I allready ordered the chasis lol just curious on if install is any difrent

@MDTTAC 3 жыл бұрын

@@adamknutson7885 The install is the same across the American family and we do have one for the Gen1 LSS which is available here - kzfaq.info/get/bejne/odmkirihsJeXdKs.html

@MDTTAC 3 жыл бұрын

@@adamknutson7885 Understood, not at this time, but all that differs is you need to install the magazine latch.

@rjashby5332 2 жыл бұрын

Would this work for a tikka t3x lite?

@MDTTAC 2 жыл бұрын

Yes, for sure! We offer our LSS-XL for both long and short action Tikka T3/T3X rifles.

@RS-dc7wy 11 ай бұрын

Does the MTD stock accommodate factory Tikka magazines, or does the new stock come with it's own magazine? Website is not very clear on what I'll need

@TWolfe777 2 жыл бұрын

Is the chassis forged, cast or mlm?

@MDTTAC 2 жыл бұрын

We machine them.

@TWolfe777 2 жыл бұрын

@@MDTTAC AWESOME!

@JG-py9ri 2 жыл бұрын

Price and how to buy for Russian buyers?

@MDTTAC 2 жыл бұрын

The price is on our site, it starts at $499.95 and currently we do not have a way to export to Russia.

@ryanlancour6765 2 жыл бұрын

Just a word of advice. You guys are trying to show the process using black parts on a black background wearing a black shirt. It's pretty hard to tell what you're doing.

@MDTTAC 2 жыл бұрын

Thank you for the feedback!