MERECEDES BENZ C250 Interior Door Handle Repair / Replacement 2008

MERECEDES BENZ C250 Interior Door Handle Repair / Replacement 2008 - 2014 Save $1,000

Рет қаралды 6,232

3 ай бұрын

Hello KZfaq,
Today, we are changing the interior door handle on a 2013 Mercedes-Benz C250. This is a common item that breaks and will need to be repaired if you don’t want to spend $1,000 on an entire door panel.
Follow our step-by-step tutorial on how to change the interior door handle for a fraction of the cost of what the Dealer wants to repair this item. The cost of the door handle should be less than $25
Parts:
Door Handle OEM Part # A 2047201171
www.ebay.com/itm/353474272782
VEHICLE FITMENT
2008-2014 C250
It also was used in a variety of other MB models:
2008-2009 C230
2008-2009 C280
2008-2014 C300
2008-2015 C350
2015 C400
2008-2015 C63
2013-2015 GLK250
2009 GLK280
2010-2015 GLK300
2009-2015 GLK350
Tools Needed:
T30 socket
Philips Screwdriver
T10 socket
3/8” ratchet
10mm socket
Pry tools
7/16” drill bit
5/16” drill bit
Drill
Cheers! Follow Bradleys' Garage:
Website )) -coming soon
Instagram / bradleygarage
If you liked the video, remember to give it a "thumbs up" and consider subscribing.
Thanks again for hanging out!
#mercedes #door #handle
Music by: Bensound
License code: 4WZW1XJPABOWTB3A
Disclaimer:
Due to factors beyond the control of BradleysGarage, we cannot guarantee against improper use or unauthorized modifications of this information. BradleysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BradleysGarage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BradleysGarage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BradleysGarage.

Пікірлер: 23

@user-ey7dt9fw7t 3 күн бұрын

Hello Bradley, from the land of the Mercedes stars, thank you very much for your video clip. I bought the door handle online in the aftermarket for just under 20 dollars. Thanks again and keep up the excellent service ...

@BradleysGarage 3 күн бұрын

Thanks for the kind words, glad you enjoyed the video. Good luck on your Mercedes project, let us know how things go. Cheers!

@user-ey7dt9fw7t 3 күн бұрын

@@BradleysGarage I already replaced the door handle yesterday. Thanks to your video, which ran parallel to the installation on my Mac, everything worked perfectly ...

@BradleysGarage 3 күн бұрын

@@user-ey7dt9fw7t That's great news, glad to hear things went smooth. Thanks again for hanging out. Cheers!

@faridonsorush6592 Ай бұрын

Thank you so much for this wonderful gift. It saved me hundreds of dollars. Mercedes dealer wanted me to replace the entire panel. Following your instructions made it possible to replace the handle myself. I really appreciate ❤

@BradleysGarage Ай бұрын

Thanks for the kind words, we are glad the video helped yo out on your Mercedes project. Be sure to check out all the videos we have posted on the C250 here - kzfaq.info/sun/PLFnK0z3T00fXJS_C_0mOTHudox6MTruuC&si=WosBebzaJglzmS3e Cheers!

@adelmazio2796 7 күн бұрын

This video helps me a lot thank you problem solved.

@BradleysGarage 7 күн бұрын

Thanks for the comments, glad you enjoyed the video. Appreciate the feedback that the video was able to help get you working again. Cheers!

@Kikipromos 2 ай бұрын

Thank you so much! I followed step by step and now we are good to go!

@BradleysGarage 2 ай бұрын

Thanks for the kind words Kiki, glad you enjoyed the video. It's great to hear the video helped you out with your Mercedes project. Cheers!

@jamieliu7037 Ай бұрын

Did you fix it by yourself? I’m thinking of doing it…but I’m afraid I’d ruin it😂

@christopherclay6267 Ай бұрын

Thanks. I had to do this job today and your video helped me. Hopefully this handle lasts.

@BradleysGarage Ай бұрын

Thanks for the comments Christopher, glad the video helped you out with your Mercedes project. Cheers!

@ski69 3 ай бұрын

You'd think the new handle would be cast aluminum???? ahhahahahah

@BradleysGarage 3 ай бұрын

You would think they would have designed it better after more than a decade. It's obvious the handle was a poor design to begin with. At least if this one breaks again, you can simply unscrew it instead of having to drill out the plastic bits. Cheers!

@Affrihano Ай бұрын

Splendid work. Do u want came in Italy to do the same thing to my mercedes? 😀

@BradleysGarage Ай бұрын

Thanks for the kind words, not sure when we will be in Italy so it might be a long wait. 😎 Hopefully the video helps you out with your Mercedes project. Cheers!

@nobody7445 17 күн бұрын

Thanks! I'm never buying another German car for as long as I live! So overly complicated for no reason & cheap flimsy plastic garbage. They sure aren't what they used to be & it's a dam shame!

@BradleysGarage 17 күн бұрын

Thanks for the comments, they have their moments for sure. We enjoy the driving experience you get from Euro cars. American, Korean and Japanese just don't offer that same level of refinement. And trust us, they have other repair issue items that are even worse than door handles. it really comes down to what you like and if the driving experience matter to you. Cheers!

@nobody7445 16 күн бұрын

Thanks for responding & your video was very helpful. I just wish they would have better build quality with the prices they charge! The handle shouldn't be flimsy plastic & the way to remove it should be simplified if they do want to make it so difficult even their own techs don't want to do the job they just tell you to get a whole door panel lol & you are right I do love my '06 x5 I haven't owned it long enough to know the headaches repairs will bring me along the way but it rides & drives great for now & good power for a 6cyl I was told the v8 was fun but less reliable! Looking forward to more of your videos as I attempt to keep these things on the road as long as I can

@WeeGee58 15 күн бұрын

Yeah I aint going through all that hassle to fix this issue. My inner door handle broke today. Going to just buy a door panel from a scrap yard.

@BradleysGarage 15 күн бұрын

Thanks for the comments, it is a process to repair the handle but it should last another 10+ years. Getting a complete door panel would be an easier swap for sure. The only issue is the panel you are getting is also 10+ years old so the handle will soon be failing shortly after the swap. Unless you can find a clean wrecked garage kept car, chances ae it will be on it's way out as well. Good luck on your MBZ project, Cheers!