No video
Messing Around with Oyumaru
Рет қаралды 1,524
11 ай бұрынI use Oyumaru for the first time and copy a bunch of things for basing miniatures.
The polymer clays I used are DAS Smart and Sculpy Premo.
I find that Sculpy III is too soft for this kind of molding.
#moldmaking #polymerclay #miniatures
@TheSkeletonVA 9 ай бұрын
Brilliant stuff!
@GearedHobbies 9 ай бұрын
Thank you!
@bestname527 11 ай бұрын
2-part epoxy putties are perfect for oyumaru because they don't get deformed when extracted
@GearedHobbies 11 ай бұрын
Good point! While my preference is polymer clay, I'll try out some Milliput next time I want to get a more proportionally accurate copy.
@ryanross1982 10 ай бұрын
also Kneadatite is fileable once cured and does the same thing@@GearedHobbies
@Modge17 9 ай бұрын
You can also use Gorilla 2-part epoxy glue which works well because it doesn’t stick to the Oyumaru but also you don’t have to remove the excess as it just forms a thin film when you squeeze the moulds together
@9daywonda 11 ай бұрын
Quite informative.
@GearedHobbies 11 ай бұрын
Thanks.
Jason Derulo
Рет қаралды 32 МЛН
SALEM EPISODES
Рет қаралды 544 М.
WIRED
Рет қаралды 1,3 МЛН
Midnight Hatter
Рет қаралды 13 М.
Lost Wax
Рет қаралды 23 М.
Jason Derulo
Рет қаралды 32 МЛН