Bob, brilliant. Thank you 🙏

Thanks for reply Hopefully I can get one soon

Hi Anne, your tank won’t have a sensor and it’s probably unlikely you’ll be able to fit a sensor, unless the tank has been replaced at some time. It’s fairly easy to check if you know what to look for. While the engine is cold remove the coolant filler cap and look inside to the left hand side of the tank, if you can see a white cylindrical float approx 15mm in diameter then the tank will accept the sensor, if not I’m afraid it’s a new tank. I’ll be putting another batch on ebay in the next couple of weeks and I’ll put the item number on here. Bob

Fitted mine a couple of weeks ago at the same time as having stainless steel coolant pipes fitted gave it a good bleed but always hard to get that last 1/2 litre . Anyway went for a ride on the Sunday & As sure as day the alarm went of the water level dropped about an inch topped up with distilled water no problem since very impressed I think it’s better than the factory fitted one & definitely than them over priced contractions on the market.

Sounds just what I need. I have a late 2002 tf with a tank presumably without a sensor; can I add a sensor to the existing tank? and will you be releasing another batch of the alarm kit on eBay?

It'll be a couple of months before I have any more for sale. I'll post an update when they're ready

A well though out system for the low coolant problem. As the previous comment - where is it available please..?

Hi Bob. Do you have any of these left?

Hi Bob. Do you still put these kits together? Thanks. Garry

Hi Bob, are you still making these? Peter

Hi Bob. Just finished watching your video and I would be interested in purchasing one of your kits. Is there anyway to fit this to a Mk1 MGF VVC. I notice Rimmers sell a similar system that you can remove the LED out of to place into a switch blank on earlier cars. Thanks.

This is perfect, I have the header tank with sensor but no internal alarm or indicator to connect to it. Do you manufacture these yourself? If so how much does it cost to purchase, or if you have a store I would love a link to it. Thanks!

Hi Bob, great video. I have recently bought an MGF and would like to fit one of your kits. Do you currently have any available to purchase please?

I make these in small batches and normally put them on ebay, I’m hoping to make another batch soon. When I’ve made them I’ll post a comment on here to let you know.

Any idea when you're selling again ?

I've just listed another batch on ebay which you can find using item number 323489621277 or search for MGF and MG TF easy fit low coolant alarm.

Hello Bob. Any chance that you are able to make another batch of these kits ? Thanks

Hi Bob, I know its been a while but do you have these still available?

Just to let you know I've put another small batch of these on ebay the item number is 323137339140 or you can search for MGF and MG TF easy fit low coolant alarm. Thanks

Are these kits still available pls

For fitting instructions follow this link bobsbitsandbobs.co.uk/documents/MGF_TF_LCA.pdf

I've just listed a new batch of alarms on ebay, you should be able to find them with this link ebay.us/PSAQZe?cmpnId=5338273189

I've just listed another batch of these items, listing No. 323229982692 Bob

Any idea when you're selling again ?