Microsoft Flight Simulator 2020 | G1000 Tutorial | EP#5.2 How to Read Sky Vector IFR Charts

Рет қаралды 6,200

Күн бұрын

#MSFS2020 #MicrosoftFlightSimulator #Tutorial
Hello friends, this is the 5.2th episode of the tutorial series, we're going to take a look at Sky Vector Departure, Arrival and approach charts. We'll look to the charts side by side along with our flight plan. I'll also point to some additional information you can get from Sky Vector such as Weather, turbulence, wind information and overlays. I also had enough time to create a Discord server link is down below if you have more questions to ask or just want to chat a little bit.
Please try to watch the video until the end if you can, it covers a good chunk of valuable information. Please leave me a comment for your questions and requests.
G1000 Tutorials playlist : • Microsoft Flight Simul...
Link to stackexchange post about airway naming conventions: aviation.stackexchange.com/qu...
Don't forget to subscribe and turn on the notifications to get notified for future episodes!
Follow me on Instagram: the_simpilot
Join me on Discord @ discord.io/TheSimPilot
Time Stamps
00:00 Introduction
01:58 Sky Vector overlays and weather information
09:40 More information on Airways
12:00 Planning an IFR Flight
12:41 How to read Airport Diagram
16:07 How to read the IFR Departure charts
22:54 How to read the Arrival charts
29:17 How to read the Approach charts
My PC Specs
CPU: I5 9600K @ 5.0GhZ
Motherboard: AsRock Phantom Gaming Z390 ITX
GPU: Zotac GTX1070ti
Ram: 32GB Viper 3200mhz DDR-4
HDD: Crucial P2 M.2 PCI-e 500 GB
Thanks for watching!

Пікірлер: 70

@TheSimPilot 3 жыл бұрын

Hi friends, I hope this tutorial answers some of your questions about reading the Departure, Arrival and Approach Charts. If you have more questions you can join me on Discord @ discord.gg/sqGQjA

@murro4465 3 жыл бұрын

why does it says your discord link is expired?

@TheSimPilot 3 жыл бұрын

@@murro4465 I need to update that link, I didn't know the link can expire when I created it.

@jimmartin618 3 жыл бұрын

Clear, concise, excellent. Came across this episode first, and now intend to go back to the beginning. Thank you for the education.

@TheSimPilot 3 жыл бұрын

Glad it was helpful!

@robk7196 3 жыл бұрын

This was incredibly helpful. Thank you!

@TheSimPilot 3 жыл бұрын

You're so welcome!

@grampygamer8584 3 жыл бұрын

Really love how you explain every topic! Thank you for making enjoy flying more and more

@TheSimPilot 3 жыл бұрын

You're very welcome!

@jackassery4656 3 жыл бұрын

Great series. I know these videos take more time to create than most people think. Thanks for your time and effort.

@TheSimPilot 3 жыл бұрын

Thank you Jack and frankly each one takes about roughly 3-4 hours from starting the to record to publish, not counting the upfront work I do to ensure I cover the topic good enough :). Thanks to all of you guys and the support I enjoy making these!

@kennymcintyre4791 3 жыл бұрын

I've been going through all your video and your the best teacher out there. Keep up the good work 🇨🇦

@TheSimPilot 3 жыл бұрын

Awww thank you very much!

@bobwestwood7824 2 жыл бұрын

Excellent, thank you so much, a lot to take onboard will have to watch several times over.

@TheSimPilot 2 жыл бұрын

You're very welcome

@harbinguy1 3 жыл бұрын

Excellent explanation of the flight planning!!! Thank you!

@TheSimPilot 3 жыл бұрын

Glad you enjoyed it!

@martymctry20 3 жыл бұрын

Excellent tutorials! Thank you so much! You should have many more subscribers with this content and your talent to explain stuff like this in an understandable way.

@TheSimPilot 3 жыл бұрын

Thanks Marty I absolutely love your feedback, I am happy with how the channel is doing. Hopefully it will grow in time.

@murro4465 3 жыл бұрын

Absolutely the best tutorials I've come across especially for someone new to aviation like myself. I've watch so many others who doesn't explain what all these abbreviations mean nor how to read these what seemed to be complicated charts..... thanks for making make cense to me!

@TheSimPilot 3 жыл бұрын

Thank you very much, trying to think from a beginner perspective and explain as much as I possibly can.

@steveclark189 2 жыл бұрын

This is just awesome help. Appreciate all you did here. I would have a much more difficult time getting this any other way.

@TheSimPilot 2 жыл бұрын

You're very welcome!

@bilge77 3 жыл бұрын

You are very thorough in your tutorials ....thank you for the education

@TheSimPilot 3 жыл бұрын

You are very welcome

@captainmegaxenon2042 3 жыл бұрын

Why don’t you have more subscribers? Thanks again for a great tutorial 😁👍

@TheSimPilot 3 жыл бұрын

I'm still learning discord, please use this link discord.gg/GXkDpUj I created one without knowing that they have an expiration date

@g_pazzini 3 жыл бұрын

Thanks.. I become smarter after watching your videos.👍👍

@TheSimPilot 3 жыл бұрын

Glad to hear that. You're welcome

@WERNERvsNEO1 3 жыл бұрын

Instant thumb up!

@marcoscolombo2642 3 жыл бұрын

Ótimo video. Parabens! Voce é o melhor professor (Port). ("Great video. Congratulations! You are the best teacher.")

@TheSimPilot 3 жыл бұрын

Thank you!

@WERNERvsNEO1 3 жыл бұрын

My brain is getting a few missed approaches... lol so much information! :)

@TheSimPilot 3 жыл бұрын

I thought about dividing this into two episodes but then it'll make the viewers lose their chance of seeing all charts in one video. It's a little intense but glad to hear that you can come back to it after the missed approach and try a second landing :)

@WERNERvsNEO1 3 жыл бұрын

Yes I can turn around as much as needed. 🙂

@NorbertoPadin 3 жыл бұрын

The quantity and quality of information provided exceeded my expectations. It is the first time that I have been able to see all the parts and charts of a flight plan from start to finish in one video. As mentioned below, your channel should have many more subscribers. Every now and then, you would have to do a live of a short flight, either VFR or IFR, I see that helps many KZfaqrs to increase their audience. The opening of Discord to be in direct contact is also appreciated, there I am registered as LaNorba22. Thank you very much for taking the time to make these videos. Regards, Nor.

@TheSimPilot 3 жыл бұрын

Hi Norberto, I appreciate your constructive comments, I'm trying to think outside of the box when creating tutorials, I know there are number of tutorials on YT around the same topics, however sometimes it's hard or challenging to find all information wrapped up in one video and that's what I'm aiming to do, while trying to help flight sim enthusiasts to enjoy flight simulation and the beautiful community. Again thanks for your kind response!

@ailianfoto 3 жыл бұрын

@@TheSimPilot I agree with Norberto. You should have thousands of followers because the invaluable info you give here

@dirceusoaresjr 2 жыл бұрын

First I have to thank you. I'm new into flight sims and learned so much with your tutorials. I'm already trying to fly the A320 following your tutorials. You definitely should have a lot more subscribers. How do I insert in the flight plan the arrival, but the short way. Like you did with the departure that shows only ZEPER2. Without inserting all the waypoints.

@TheSimPilot 2 жыл бұрын

Hi thanks for the kind comment!. For G1000 you need to use the PROC menu of the MFD to select the arrival procedure for your destination airport first. Then you can select the approach after entering the arrival. G1000 is now changed and available in marketplace you can look for G1000NXI this video will walk you through on entering the flight plan in G1000NXI. kzfaq.info/get/bejne/h7SFZcaLzuDTk40.html

@dirceusoaresjr 2 жыл бұрын

@@TheSimPilot Sorry, I wasn't clear. I mean while making the flight plan in SkyVector. To make it shorter. Is there a way to insert only one code for the whole approach instead all the waypoints?

@edgarxavier493 3 жыл бұрын

Good video, just remember all speeds are Ground Speeds when it comes to descent planning

@TheSimPilot 3 жыл бұрын

I'll keep that in mind and sorry if I mentioned IAS in the video it needs to be GS

@paulwilson1726 3 жыл бұрын

Loving your tutorials. This is the kind of stuff I'm sure people would pay for. Just saying! how did you learn it all? Cheers.

@TheSimPilot 3 жыл бұрын

Hi Paul, thanks for your nice comment. It's mainly curiosity and passion made me research, read and practice to learn all these over the course of years. With MSFS I thought I should start sharing this knowledge by thinking there will be more new flight simmers coming.

@paulwilson1726 3 жыл бұрын

@@TheSimPilot thank you for doing so! It's truly a one stop shop for all the necessary nav things.

@mrpawno4955 3 жыл бұрын

Hey, excellent video again. Do you know how the E6B works? Maybe you could do a video on it? Like, how to correct for wind and that :D

@TheSimPilot 3 жыл бұрын

I'm not too knowledgeable on E6B's to be honest, but I'll do some research on how I can do some tutorials

@jakew9887 3 жыл бұрын

Excellent Video. Thanks for your work. Can you import the flight plan from SkyVector into MSFS 2020?

@TheSimPilot 3 жыл бұрын

I don't think it's possible, Sky Vector does not give you a save option.

@ailianfoto 3 жыл бұрын

I would like to know how to generate a complete Flight plan with departure and approach info as you explained making it from FS2020 and how to import it to FS2020. Many thanks in advance

@TheSimPilot 3 жыл бұрын

Interestingly enough I was planning to do that in the next episode. Thanks for asking

@KENNYB322 3 жыл бұрын

When you do the 3000 could you please go over user waypoiints and use them in a flight plan., thanks

@TheSimPilot 3 жыл бұрын

Kenny, I didn't understood what you meant by user way points. Could you please elaborate?

@RemyLabue 2 жыл бұрын

Appreciate your videos, I'm still a newbie myself. You mentioned that the departure procedure was only for faster aircraft and small props wouldn't be allowed to follow it. Was there a different departure procedure for the smaller aircrafts, if not what would the procedure be defaulted to?

@TheSimPilot 2 жыл бұрын

I think I was confused too, it should be flyable with smaller aircraft as well if they can clear the altitude restrictions. Any IFR capable aircraft should be able to do it.

@RemyLabue 2 жыл бұрын

It would make sense though, if I take off in a 172 and there are jets waiting, they'd be stuck for an hour waiting for me.

@TheSimPilot 2 жыл бұрын

@@RemyLabue That's a point, though I don't know how ATC operates in real life when small aircraft wants to take off from an international airport. Though, I don't think there will be to many due to cost of hangars and airport fees.

@RemyLabue 2 жыл бұрын

That's true. Maybe when flying small aircraft I should only fly out of private strips to keep to realistic procedures. Thanks for your advice.

@shariqinfo8015 3 жыл бұрын

Its good and quit usefull ...your way of explaning is excellent. I need to understand G1000 cessna entry of waypoint how to do it Regarfs

@TheSimPilot 3 жыл бұрын

This video explains exactly that kzfaq.info/get/bejne/i5mYlM5h2ZOpfXU.html

@shariqinfo8015 3 жыл бұрын

@@TheSimPilot after posting my request i found it ...thanks ...its help a lot ..as I feel I am in a class room with my instructor...your voice speech is perfect for non native to understand ...I started improving Thanks and Regards.

@TheSimPilot 3 жыл бұрын

@@shariqinfo8015 Regards from me as well, appreciate the feedback...

@shariqinfo8015 3 жыл бұрын

@@TheSimPilot sir I was thinking that in my country most of them do not understand properly ..there fore I thought if I translate your vedio in URDU. But I have to work hard. I dont know if it works with your permission.

@TheSimPilot 3 жыл бұрын

@@shariqinfo8015 I have no problems with translating my content if you put a watermark with my channels name and credits to the video when publishing. I don't want you to be in trouble with KZfaq for Copyrights

@pradeepchawla6643 2 жыл бұрын

Around 3m 11s I believe you have incorrectly mentioned that Zulu time as Phoenix time. The Zulu time zone (Z) is the same zone as the Greenwich or Prime Meridian with no offset written as UTC +0:00. This means that it exactly the same as Coordinated Universal Time (UTC). ... The Zulu time zone is primarily used in aviation and military operations.. To get Phoenix time you will have to subtract 7 hrs from zulu time.

@TheSimPilot 2 жыл бұрын

Yup I know about the Zulu time and you're right I forgot to mention it's the Zulu time or UTC. Good catch and thank you!

@pradeepchawla6643 2 жыл бұрын

@@TheSimPilotPlease could you advice me a good configuration for a flight Simulator PC which should take me for atleast next 3 years. I am absolutely new to FS. Thanks

@TheSimPilot 2 жыл бұрын

@@pradeepchawla6643 there's not an easy answer for that and without knowing your budget it's a little hard. However if you want something that lasts 3 years. Focus on mainstream components and the rest will be just fine. AMD Ryzen 5900X or Intel I7 11th gen CPU for AMD X570 chipset Motherboard for Intel Z590 chipset Motherboard. 32 GB DDR 3600 - 4000 mhz ram. 2x1TB nvme SSD (1 as the system drive and the other as the sim drive) also an RTX series GPU if you can find one at a reasonable price. The rest is 750 W Gold+ Power supply and peripherals you please. I recommend a Monitor with 2K resolution and a 2TB SATA SSD for other stuff and backup. Also don't forget a 240mm All in one liquid cooler for CPU and big enough case for good airflow with good case fans.