Just adding this for ppl just looking into this. Don't count EZ-Lip out. It is more flexible and easier to contour around corners. The All- fit is harder to get looking perfect. Since it is sturdier it waves in different directions after making a turn, causing an odd fitting lip. This is just my experience.

I got EZ lip on my car for 3 years already. Still looking good. It is easy to apply. All fit looks kinda hard to apply around the curve.

The downforce must be insane

I Made these for my Car back in 2009 it started on a small forum. The Eclipse and Civic Hatched forum . We also Build side skirt using the wood that run around your room the bottom pieces. That 3M Tape merged into my car the lips is incredible durable. Still standing after all these years

I think the ALL-FIT lip is much better for quality and longevity but for anyone who wants to install the ALL-FIT lip without screws you may have issues keeping it on your car. I installed 2 different ALL-FIT lips on my car after properly cleaning my bumper and had it fall off within a week without the screws. I never used the screws because I installed it on my brand new car and didn't want to drill holes in my bumper even if they wouldn't be seen. I have now put those 2 lips on my 2 other cars with screws and they have held up just fine. I have now installed an EZ lip on my new car and it has held up just fine without any hardware. For anyone who is just going for the look and isnt worried about scrapping anything or doesn't want to drill holes in your bumper I would recommend the EZ Lip

it really does look a lot better... great job bro

I was 5 seconds away from going with EZ .. till I saw this .. good comparison. Changed my mind and went with All-Fit. Thanks

Anyone got this to their recommended/Ads after 6 years later.

Thank you so much for the video. I was going to get the EZ-LIP and its junk to me. I will get the better quality one.... Thanks again...

I'm really glad I didn't buy the ez lip for my dodge dart. This video really shows how flimsy the ez lip is.

Any real ricer would know to go with EZ-Lip because.....weight reduction!!!

I was literally about to go and buy an ez lip. Then accidentally stumbled across this and I'm glad. Thanks man. About to order it. Hopefully it looks good on my focus st

I Bought the EZ-Lip. Here is the verdict. Its "OKAY" for side skirts and Rear bumper. It is Not great for the Front Bumper. I did all the precautions from heating the adhesive to cleaning extensively with alcohol and drying before applying. After 1 week of driving its already started to peel from wind acceleration when driving. I will definitely go for all Fit next time i replace the front bumper.

descriptive, detailed, visually easy to follow, great comparison points of two different brands. very well thought out video. keep up the good work. I'm going for the All-lip for my 7th Gen maxima.

yep he's definitely right! that ezlip wast strong got the two lip, compare the two and ezlip break easily. all-fit lip was really durable. 5star for the all-fit lip (1star for ezlip)

Nice product pitch for All Fit Automotive

" improve aerodynamics " hahahahahhahahaha omg i'm dying ! But very nice for the car look

This is an old video. I just got a new car and have been checking out what I want to do for mods. The All fit on my BMW E92 was very low. I put the all fit on my car. I scrapped it a million times. I parked against curbs (In the beginning). Frankly it made the car too low for me. But it never screwed up. The screws made it hold like steal. I give all fit a 20 out of 10 stars!

We have the same thing on taobao in China the Samurai brand car lip which is identical to the all fit lip，made of rubber not foam rubber like the one on ebay and EZ lip， and the samurai lip is selling for $5 in China, The people behind the all-fit lip is making big money for sure.

I had EasyLip on my car for 4 years without any issues, then replace it in 2015 with EasyLip Pro which is the same harder rubber as All Fit and it's still on my car. Both product have a different look/shape/weight/rigidity/price. Depends what you want.

I went to home depot and got garage door sealer and everything to mount it for $10 and it looks great. good video by the way

Great Video Dude! I like how you explained the curves. My package had no instructions, just the product! Your video helped a lot!

I run a EZ lip on my Porsche Cayman S. It’s super great. I would buy a nice carbon fiber lip but my car is lowered a lot and I always scrape my lip. If I had a 1k$ lip it would brake alot on me

Should've compared to ez lip pro....more durable then the regular ez lip

a star screwdriver?? Really?

Just installed the all fit lip today, miles better then the EZlip. Had the EZlip before and it was super soft and scratched/ripped easily. Had to take it off cause it looked so bad.

Hmmm.... My 2004 Sebring needs a bit of a makeover. Got to fix the clear coat, spruce up the rims, a bit of front end work and deal with just one rust spot. This lip thing would be a nice mod being that the finish is red.

So glad I came across this bc it’s going on my 8th gen accord coupe too

You left the word After up there so long I almost forgot what the before looked like.

AMAZING. Thank you so much. Thinking of rallying my Hyundai Accent but had no idea what these "lips" were. Glad to know how they work and the quality. I'll be glad to purchase "All Fit" and rep them as well.

Awesome video bro. You sold me on the all fit. Thanks!

I will try to install this product in my european Civic 9th. thanks for the video!

awesome video my ez lip just arrived and i happened to come across this video looking for installation instructions glad i seen it im sold dont know what todo with the ezlip now though probably just put it on my lawn mower

You saved me money. Love that shit! I was thinking of ez lip as well but now seeing the difference wont even bother with it. Love you channel!

getting those tight curves are PITA. I redid mine 3 three times, finally got it right

loved your review! informative, entertaining, to the point. Thanks!

EZ-Lip is cheaper though, but All Fit has a larger fitment. He said they were about the same price, but they are not. EZ-Lip is about $20 bucks top and All Fit ranges from $40 - $80 bucks, but that's Ebay prices. I haven't checked other sites, but I deal with eBay regularly.

I've had my ez lip on for at least a year now, with no issues. Plus I did't have to drill holes into my car

I tried the samurai lip on my 08.its ok I guess.right in the middle where bumper bends up is where the lip didn't setup the same way on either side.its ok I guess.maybe I'm just a perfectionist or something or maybe it really doesn't look good to my liking...I get compliments though.thanks for the vid.

Very good video man, you did your research, were very clear, didn't waste time getting straight to it. You gained a follower from me!

Glad I watched this video CUZ I was about to buy the EZ lip but ordered the all fit instead. Thanks bro

Great in-depth vid. I'm going to be grabbing the all-fit side skirt kit for my MK7 golf

Nice video, now I got one more project to add to my list on my accord.

Whatan EXCELLENT VIDEO!! i cant decide wich one, until i saw your video, ALL-FIT is much better Quality, thanks you so much!

i remember doing this with garage door foam trim and 3m tape on our hondas like 20 years ago... orgins of rice.

Just ordered my all fit kit for my '14 Lexus IS 350 F Sport.

Great video! Will definitely try this out when the weather gets warmer.

A well put together video. I've looked at a few, to give me some idea, this is the best. Thank you, for your time.

I love both of your channels! I can't stop watching them xD

I wouldn't mind it if i could get away with doing a full car dip every 2 years but i feel like our winters are just too rough (and I'm too rough) on my car. Im guessing every spring you need to strip her down and cover her back up. I guess in a way thats cool too cuz we can be creative

I have a 2014 frs and this video helped a lot

Wow. I never thought I’d say this but that actually made the Honda look pretty nice. That’s incredible.

Great Video ! Didn't even know about the ALL FIT. Actually, I am going to wrap it in all white carbon fiber to put on my BRZ..........BAD ASS !!!! Thanks....

Nice, I think I will do just the sides an wrap it with carbon fiber.

I chose the cheap way and made my own with double sided sticky tape and garage door liner. It ripped in 2 weeks and was the biggest bitch to take out. Going to wait till spring to get the all fit lip or the sti lip.

I can only find the ex lip i can't find all-fit lip kit and great video bro

helped greatly ordered mine to put on my 09 accord sedan

Looks much better, All-Fit Lip really strong. GREAT ALTERNATIVE to a stupidly expensive front lip like '' 06-07 Impreza STI S204 Front Bumper Lip'' ^^

Thanks for this video I was about to buy the ezlip I'm glad I didn't now

Helpful video! I'll go for the allfit as it performs better for the reason of installing it, do you have a video on how to remove the lip nice and clean?

Not that it isn't really better then EZ lip but did they pay you?

Oh boy a Honda Accord with plastidipped black wheels, red calipers, drilled rotors and now a fake lip

Love ur channel bro , i know u changed projects whats ur daily these days?

Don’t you do more damage screwing in a screw than a couple of scratches?😂😭

Man you did that really well! It looks factory man! Good job!

Seriously good video man. Thanks for the info

Nice door sealing strip

Getting this because my car is really low so I wanted a lip that wouldn’t get destroyed really quick

wait when i screw it into the bumper to make it secure... am I screwing holes in my bumper?

UPDATE: week one - EZ lip Product already started coming off of my vehicle. note: i did all precautionary measures to apply product and has already Torn and adhesive is peeling off. AND I BOUGHT A 4-PACK!!! -_-

At first I thought this was rice but now I think it's nice and might do it to my car

You do great videos. Much appreciated regarding item I contemplate buying. I'm scared to try vinyl wrap myself

Are there any gloss black versions?

Bumper is plastic so can be drilled easily . What about the sides ? Is normal tape adhesive strength sufficient to bear and damage ?

This video is very informative, im getting the 2016 Volkswagon Jetta, and i was wondering which lip would fit best, thanks alot

Alot of times passed Milan; now your doing engine rebuilds 🤧🤧

How easy is this to remove? I know 3m tape can be a pain.. Will it remove any paint if you have to remove it for whatever reason?

Great video. Clear and concise.

Now I can rice knowing I have the weight reduced version

screwing up into the bumper kinda screws up the bumper right...

Right now I'm wondering how cool will look my Fiesta 2013 HB with this mod.

Im thinking of going with the all fit lip due to my car being so low

well done and thank you .

Hey Can you tell me how to put screws on the under the bumper without scratching it ?? For eg: What positions??

It looks great on yr Car bro... I got the Ez-Lip on my car for now.

Ez lip just came in And I was watching videos and came across this. Damn!

I’m goin with the ez lip

Did you notice any change in fuel mileage?

How big is the lip the 1.5 inch or 2.5 inch

I put EZ Lip on my car and the front down force was so high, the struts bottomed out. I made a rear deck spoiler out of EZ Lip and then the front and rear were then balanced. I had to make side skirts and, well, you know...y'all...I could drive upside down. So. Much. Downforce.

Link to the garage door seal

Putting on my Suzuki samurai make it go faster and less top heavy?

nice :) I wouldn't say that weight is good thing tho if you aren't using the screws

I want to install this without drilling holes. I know to use the 3m but will I run into any problems since the end of my bumper where I would attach the lip is has some scratches ?

Very well done, after having watched your video I wish I hadn't wasted 11. Minutes of my life watching another comparison video. From your after images it looks like you installed it more as a splitter than an air dam. Do you plan on doing the entire car?

Can you tell me why the sedan and coupe bumpers don't fit?

@milanmastracci its this one of those links that you get paid when people click on it? its this your honest review of both products or or allfitautomotive sponsor You? I'm not affirming anything I'm just asking....

i really enjoyed this video. very well done

Did u not do the side skirt and rear bumper?

do you have to drill holes to the bumper so that the screws with the washers fit?