Sweet! I love tools. LOL

Very true on everything you said. Great input Mike! Much appreciated.

Look at workshop addict and shop tool reviews they and the torque tool channels videos it lives up to the numbers

@@topchoiceauto9626 I'm not saying the tools aren't good tools, I'm merely pointing out they don't live up to the numbers they claim. I don't believe the pneumatic tools do either. The torque test channel is a perfect example of what I'm stating. kzfaq.info/get/bejne/pqyBYLaE2peRgH0.html

The Milwaukee tool lives up to the rating. He is using a 6" extension which lessens the power. Check out some other videos on this impact wrench and you will see the difference.

You don’t have to believe. Milwaukee usually makes their numbers. Get that torque-robbing extension off and I bet setting 1 breaks them loose.

Thanks so much Robert. I really appreciate that sir. I have done quite a bit of Milwaukee content lately. Hopefully, you will find some of the others helpful too. I really appreciate the kind words Robert. If you are not already a subscriber I would really appreciate if you would consider subscribing. Thank you so much.

That's ridiculous. I have to watch them every time I take a car somewhere if the tire is coming off. I have had similar circumstances. I had one 3 or 4 years ago where I had a 30" breaker bar on it and I had to jump (with my 215 pounds) on the bar to break the nuts loose. Mine works good too. Has always done the job for me. Good hearing from you Danny. If you are not already subscribed I would really appreciate it if you would help me out by hitting that subscribe button. Really appreciate it sir.

Very true! Thank you Danny.

Thank you. Love your channel too!

Thank you. I shoot everything on either an iPhone 13 Pro or Osmo Action. This was shot on the iPhone.

It is rated at 250 ft/lbs. It should handle most cars as long as you have a good charge on the battery. If it doesn’t work for you you can return it. Let me know how it works and thanks for the kind words.

Thanks Bill. In the daylight they didn't seem like much but in a little darker light I bet they are a tremendous help. Thank you so much for commenting. I have been doing a lot of Milwaukee unboxings lately. I do appreciate you watching sir.

Shocking!

Very nice! Thanks for the comment. Look forward to the next.

Interesting. Thanks for the info ripd97. Much appreciated.

Very interesting!

Yes, sir. Very good observation. I appreciate it!

I suppose you could with the right adapters. But, really overkill. I would recommend the brushless impact driver.

Awesome! Thanks for the info Kas.

WOW. That is great information Dave. Really appreciate it sir!

I recently started learning about this myself. I just got the gen 4 hammer drill kit that comes with the impact driver. A few days later, the band impact wrench was in the daily specials with a battery and charger for $199. To me, the 5 amp xc battery is heavy because I don’t have big hands or wrists. Someone pointed out that they have the two pack of cp 3 amp batteries on sale for $99, and those have 21700 cells. I’m going to return the “fee” tool that I got with the gen 4 kit because it wasn’t really free, if you know what I mean. I’m going to use the refund to buy the cp batteries.

@@DiligentDave1966 Sounds like a great plan Dave. I am all about the tools and getting the best deal I can. Good hearing from you again sir. I hope you have subscribed. I would love to see more comment from you on the videos. Love the input.

@@DadsGarageDIY Someone just told me that the cp 3.0 provides about the same power as the xc 5.0. Apparently Milwaukee tools do the best with high output 6.0 batteries. However, I feel that the power to weight ratio still makes the cp 3.0 a great choice, since it’s a bit lighter than the xc.

@@DiligentDave1966 You are a wealth of knowledge Dave.

Thanks Diane. Good hearing from you. All good here. Hope all is good with you too. Got the house about done?

@@DadsGarageDIY it is going OK- we were suppose to close 11/10 but now will close towards the end of November. I bought fall decor thinking I would be there before thanksgiving but due to gas stove top, built in oven, and dishwasher are on backorder and can’t get permit to close. They r also shirt on light fixtures, backsplash and microwave but those aren’t preventing for close but others that are required for obtaining permit is putting my interest rate I locked in in jeopardy! If I don’t close by 11/25, I will have to re lock and the rates are higher now! I had anxiety heifer but now even more! I had to overcome so much with all the crap builder put me thru and this is compounding it! Ugh.. keeping my fingers crossed!! Thanks for checking on me- can’t wait for the holidays!!

@@dianedo8314 It will come together. So sorry it has been so stressful. May people I know that have built have similar stories. Unfortunately seems like more that have this story than having the smooth process. But, it will work out.

Great stuff Sonny. Much appreciated.

100% correct sir.

Talking about tire shops, they were impressed with my 1/2" M18 high torque as I used it to remove nuts when we changed to winter tires on my old rig. They told me they lug around air tools in their service truck and wished they could get a battery gun. So I would be careful to point to the tire shops as an authority. Alot of them use old tech out of whatever the reason.

Very true. I was trying to not hit the wheel. I know that was an error in my test. Love the name by the way. Right there with ya. Probably how you found me...all the gun content. LOL

@@DadsGarageDIY lol yeah I definitely support it and I like the 2962-20 owned mine a while great tools

@@NRASUPPORTER1911 I love me some Milwaukee! Been working on changing over all my tools to Milwaukee in the last 3 years or so. Wish I would have done it sooner.

Yes. Totally agree.

To keep it further away from the car. I know it reduces the torque. But, the lugs were at 125 and a 650 gun shouldn’t have an issue. If I were trying to get something tighter I get it. Thanks Wendell.

@@DadsGarageDIY it wouldn’t have struggled if the socket was on the anvil but you make a good point

@@wendellgreenidge3362 Appreciate you sir.

True.

Thanks Matt.

Yeah. That was a heck of a bargain. It was going just before Christmas. Ugh!

Not sure that should get a thumbs up. Lol

Извини. Не уверен, что говорит ваш комментарий. Прогнал его через Google Translate, и там было что-то о более длинном удлинителе.

Nyet.

True