Milwaukee M18 Fuel 1/2 Inch Mid-Torque Impact Wrench w/ Friction Ring Beast 2962-20 Unboxing & DEMO

No video

Milwaukee M18 Fuel 1/2 Inch Mid-Torque Impact Wrench w/ Friction Ring Beast 2962-20 Unboxing & DEMO

Рет қаралды 24,580

Күн бұрын

Milwaukee M18 Fuel 1/2 Inch Mid-Torque Impact Wrench w/ Friction Ring Beast 2962-20 Unboxing & DEMO
This mid-torque impact wrench is the most powerful one I have had the privilege to demonstrate yet. I hope you all enjoy the video and I hope it answered any question you may have had about this Milwaukee impact wrench. We always appreciate your support through likes, comments, shares, clicking the notification bell and all notifications, and SUBSCRIBING. You can now support the channel through purchasing merch, donating and memberships. Thanks again for everything and we (Irah & I) will continue to work hard to bring you better and better content on Tools, Tech, DIYs & Deals.
Check out our website to see our latest merch: masteringmayhem.com
Don't forget to enter the Huge On-Going 2021 GIVEAWAY! Subscribe to the channel and comment on this video to enter the GIVEAWAY: • Video
Tips and/or donations for maintaining and growing the channel are greatly appreciated: www.venmo.com/MariusContra
👉 Links below are affiliate links. If you buy something through this link I may get a small share of the sale. ❤️ (Always check links for most current prices)
Milwaukee 2962-20 M18 18V Fuel 1/2" Mid-torque Impact Wrench with Friction Ring
amzn.to/3kK6IJD
Milwaukee 2767-20 M18 Fuel High Torque 1/2-Inch Impact Wrench with Friction Ring
amzn.to/3qibkaP
Milwaukee M18 FUEL w/ONE-KEY 18-Volt Lithium-Ion Brushless Cordless 1/2 in. High Torque Impact Wrench w/Friction Ring
amzn.to/30geXDy
Milwaukee 2767-20 1/2" High Torque Impact Wrench w/ 48-11-1850 5.0Ah Battery
amzn.to/2MO3t7n
MILWAUKEE M12 FUEL Stubby 1/2 in. Impact
amzn.to/2NUhIIr
Bosch 11255VSR Bulldog Xtreme - 8 Amp 1 Inch Corded Variable Speed Sds-Plus Concrete/Masonry Rotary Hammer Power Drill with Carrying Case, Blue
amzn.to/3ecNP0x
Bosch GBH18V-26DK15 18V EC Brushless SDS-plus Bulldog 1 In. Rotary Hammer Kit with (1) CORE18V 4.0 Ah Compact Battery
amzn.to/3sXR14r
EQUIPMENT I USE FOR MY VIDEOS:
New Apple iPhone 12 Pro (512GB, Graphite) [Locked] + Carrier Subscription
www.amazon.com...
Canon EOS M50 Mark II + EF-M 15-45mm is STM Kit Black www.amazon.com...
K&F Concept 72 Inch Camera Tripod, S211 Transverse Center Column Aluminium Professional DSLR Tripod with 360 Degree Ball Head,Quick Release Plate,Detachable Monopod 10kg Load for Travel and Work
www.amazon.com...
Rode DDC-GO DeadCat Go Artificial Fur Microphone Wind Shield for VideoMic GO
www.amazon.com...
ChargerCity Pistol Grip Stabilizer Tripod Handle Mount w/Holder for Apple iPhone
www.amazon.com...
#masteringmayhem #milwaukee #impactwrench

Пікірлер: 77

@jduasvte2436 3 жыл бұрын

Selection 4 is more for automotive. when losening the bolt, it slows down when it stops feeling resistance, and when tightening a bolt , it stops when it starts to impact , so it doesnt over torque a bolt. I have the stubby and love it, great review 👍

@ZeGermanHam 3 жыл бұрын

Correct. Not quite sure why he decided to review the tool without first learning how it functions.

@ZeGermanHam 3 жыл бұрын

I owned the DeWalt seen here for 1.5 years and sold it to buy the Milwaukee 2962. The Milwaukee is just a better tool in all metrics. Although the DeWalt was powerful enough for most things a mid-torque would be used for, I grew extremely frustrated with the forward/reverse switch placement and (lack of) detents. It was so easy to knock it into the wrong setting when handling the tool that it made using it very annoying.

@nerdymra8252 3 жыл бұрын

Bufunga's real name is Sean? I feel like I just found Batman's secret identity. 👍

@Phantom8Bit 3 жыл бұрын

Welcome to the bat cave

@bufunga 3 жыл бұрын

Damnit😳

@bufunga 3 жыл бұрын

You guys are too generous. Lets keep paying these things forward we all need guiding lights to keep us on a positive path especially these days. Oh and the name comes from a joke i was told. Death by Bufunga.

@MasteringMayhem 3 жыл бұрын

We’ll offer and give as we are able and I agree, let’s keep showing each other and others that we can help one another. Thanks for letting me know about the name. I’ll be shipping the wrench your way next week sometime. I have a 1-2 day project and when I get back I’ll ship it out to you.

@h0melyfe792 3 жыл бұрын

Hmm I’ll put that on my wish list. I like it that it’s more compact. Currently have the Dewalt high torque impact wrench which is a beast as well.

@jamestroy34 3 жыл бұрын

I would take the Milwaukee mid torque. It’s a beast. I have DeWalt as well, but the numbers don’t lie

@CP-ok1gv 3 жыл бұрын

This new gen 2 is great. I got the gen 1, going to keep for now. If I upgrade, might actually be to that new makita mid torque.

@MasteringMayhem 3 жыл бұрын

That Makita is looking amazing too 🙂

@georgedavall9449 3 жыл бұрын

I’m thinking Marius looking really tough in them safety glasses! 👍👍👍👏🏻😁😂🙏✌🏻

@BronkoNagurski_ 2 жыл бұрын

I’m holding my 2962-20 right now while I’m watching this and mode 1 does have variable speed.

@richb2229 2 жыл бұрын

You weighed them with different batteries, you should have weighed them bare to get a true difference. The Dewalt had a smaller lighter battery. I have the 1/2” Milwaukee mid torque. It’s a little beast, 650 ft pounds of torque does a lot more than most people think.

@bobbystaats1846 3 жыл бұрын

Love my makita 👍🏻👍🏻👍🏻 but you can’t beat Milwaukee fuel for massive amounts of power 💪🏼💪🏼💪🏼💥💥💥💥 God Bless you my friend 😇😇😇

@MasteringMayhem 3 жыл бұрын

Thank you. Yes, Milwaukee has some serious power to size ratio. God bless you and yours 🙂✌️❤️

@sweat319 3 жыл бұрын

Thanks MM for showing us M18 Torch wrench 🔧, tomorrow I will win if not may the best person win

@MasteringMayhem 3 жыл бұрын

You’re welcome and all the best in the GIVEAWAY.

@joeshaffer52 3 жыл бұрын

Nice video as allways 👍 Best wishes to you and yours hope all doing better now and hope the cold is gone 👍👍👍👍

@MasteringMayhem 3 жыл бұрын

Thank you. Yes, the cold is behind us and the sun is shining and we are pushing forward. We hope you and yours are well also.

@campbell3897 3 жыл бұрын

@MM That’s my favorite T-shirt design!

@jascospeed 3 жыл бұрын

Good video, but compare weights with bare tool only. The milwaukee has an 8.0 vs dewalt 4.0 I'm betting the milwaukee is lighter since it's also smaller. You might as well had an 12.0 HO on there.

@aanhartanto8904 3 жыл бұрын

Oh man, that is really a beast, I love it, but in my country the price so high. I got seve my money to buy it. Milwaukee is the best 👍👍

@PDillz 3 жыл бұрын

I see that dewalt chair in perfect view...I see what you're really doing.

@MasteringMayhem 3 жыл бұрын

Not intentional...I promise 🙂

@tahakhan2465 3 жыл бұрын

That’s a beast for real man that could almost remove up 700ft pounds and nice 3- led lights with a speed bar 1-3 and auto mode! Wow! Wow! But also try the Ryobi hp brushless mid tourqe impact wrench it could in lock up to 650ft pounds ! I think this M18 fuel

@shanepipkin4041 3 жыл бұрын

I would take the m18

@DiligentDave1966 8 ай бұрын

How would you compare it with the Dewalt DCF891?

@joeshaffer52 3 жыл бұрын

Nice cloves 👍👍 Thank to you got the same pair from Walmart

@ReasonableAssumption Жыл бұрын

You should really use a mask for the silica in the concrete block. SDS drills kick out a lot of crap right up at you and silica can do some really nasty things to your lungs.

@momostayzanko2078 3 жыл бұрын

I love your channel, love u bro .. and I subscribed to your brother's channel even I don't like knives too much jus to support you, u are seems so nice guys. By the way am living out of the US, so no chance for giveaway to me, but really love and respect you... you know I don't forget the video on small dewalt drill when your wife was laughing... was nice chapter... my regards to her also.... Thanks a loot

@MasteringMayhem 3 жыл бұрын

Thanks for the comment and we appreciate your support. Just so you know. I will be offering GIFT CARDS for international viewers in the new GIVEAWAY which will begin here after mid March. That way you all can get whatever tool or tech that you need. Stay tuned 🙂✌️❤️. We hope you and yours are doing well.

@j.s3591 3 жыл бұрын

Great impact wrench! Great video!

@NRASUPPORTER1911 3 жыл бұрын

Sir I bought a brand new 2962-20 mid torque Milwaukee impact a while back is it normal for the anvil to slide in and outward on the tool you can hear it if you shake the tool back and forward nothing wrong with my tool I’m just curious if that’s normal I think the anvils may be free floating inside the tool I’m not sure

@MasteringMayhem 3 жыл бұрын

It shouldn’t be sliding in and out. As far as I can remember, I didn’t hear any loose parts on the mid-torque.

@danielgordon6412 Жыл бұрын

Mine does the same thing when you flip it it makes a real low clunky sound. Just slightly moves in and out. I just got mine today and was wondering the Dane thing

@bobbystaats1846 3 жыл бұрын

That knife is realllll nice like 😂😂😂

@cruizer59 3 жыл бұрын

Unbelievable that Milwaukee calls this monster a mid-torque! I wonder what their hi-torque can do?

@MasteringMayhem 3 жыл бұрын

I wonder the same thing and will be getting it as soon as I can.

@PDillz 3 жыл бұрын

It is mid torque tho. Hi torque has to be 1000+ ft-lbs

@someguy8523 3 жыл бұрын

Double M love the channel just subscribed keep up the good work.

@MasteringMayhem 3 жыл бұрын

Thank you for subscribing. We appreciate your support. I’ll keep working. I hope you and yours are well 🙂✌️❤️

@jamestroy34 3 жыл бұрын

Whoa! Changed your jingle!

@MasteringMayhem 3 жыл бұрын

I’m still looking for a new one. This one is just temporary. I had some copyright claims on the original one. It’s crazy because there were no issues for over 8 months. I got the track from a No Copyright music platform so i was pretty upset when I got that notice twice in a row. I’ll find one that will stick.

@joeshaffer52 3 жыл бұрын

It would go good with my other Milwaukee tools but the dewalt would go with all my other dewalt tools it would be first dewalt impact

@KingCuba0731 3 жыл бұрын

Out of the 3 I would take the Milwaukee all day long

@MasteringMayhem 3 жыл бұрын

Same here.

@landshark6659 3 жыл бұрын

i would take the Dewalt unless one of the others come with a battery... I do like the milwaukee

@joeshaffer52 3 жыл бұрын

I’ll take the Milwaukee bro 👍👍

@georgedavall9449 3 жыл бұрын

Wow, out of curiosity, is this the same ‘bufunga’ that won once on ToolBoss’ channel. Juss askin? Dude, you should, or do you play the lottery? Congrats! 🤔😁😂🤣✌🏻

@MasteringMayhem 3 жыл бұрын

Not sure, but I wouldn’t be surprised. Unique name to not be the same person 🙂

@stephen8385 2 жыл бұрын

i just got this mid trq and realize my chuck has some movement in and out if i shake it, does yours do the same? i have other model m18 and they dont have this issue..

@FernandoTRA 3 жыл бұрын

Not the right use of the power tool on the expansion anchor. The torque is of course too high. There are charts of the correct torque to use. On the other hand, if the idea is breaking stuff, then, yeah...

@MasteringMayhem 3 жыл бұрын

I hear you. It was for breaking stuff in this video. Just wanted to see how it would break open that concrete block. I’m going to get a torque testing set up as soon as I can to really test the torque on these impact wrenches. So much work to do, so many things to implement...I’ll have the equipment to make better videos as I get the funds and the time to put it all together...stay tuned 🙂✌️❤️

@FernandoTRA 3 жыл бұрын

@@MasteringMayhem great. Videos very clear, excellent sound and slomo. Most of our work down here involves concrete.

@wendellgreenidge3362 Жыл бұрын

I think real world test are better than those bs torque rigs because those torque rigs don’t tell the whole story and that can’t tell you what that impact will do on a rusted bolt

@itsamemario833 3 жыл бұрын

Interesting reviewed

@MasteringMayhem 3 жыл бұрын

Made the review with the tools and material I had available 🙂

@toolnerd 3 жыл бұрын

I would love to win that Makita beast!

@PBS-nm1uu 3 жыл бұрын

is there a gen 4 in 2021 ??

@MasteringMayhem 2 жыл бұрын

Not that I know of

@jayortiz2326 3 жыл бұрын

Awesome

@Velocity1118 3 жыл бұрын

Maybe you shouldn't cover the vents with your hands while your using it.

@DavidMunoz-sr2yc 3 жыл бұрын

Hello sir.i think the Makita is better.i think Makita has good tools. God bless.

@MasteringMayhem 3 жыл бұрын

I will try and get my hands on Makita ASAP. So many tools with so many amazing features. I want them all 🙂

@danieldepot4090 3 жыл бұрын

Do some live demo's

@MasteringMayhem 3 жыл бұрын

I’ve been considering that. I will definitely do it in the future. I’ll definitely announce it when I will start doing live reviews. I hope you and yours are well 🙂✌️❤️

@landcruisertoyota3137 2 жыл бұрын

Do not cover the opening at the back of the machine with your hands where the machine may cool down.

@landshark6659 3 жыл бұрын

Dude nice gloves....LOL

@Phantom8Bit 3 жыл бұрын

Pre-drill... 🙄

@cjarloz 3 жыл бұрын

Beefcake

@konamanstudio2447 3 жыл бұрын

😆🍻🍺😊

@tanker242 3 жыл бұрын

It's like people don't do their research before recording these videos. . . "Bolt removal mode" lol, no it's not.

@weazymholla 2 жыл бұрын

It literally has a symbol of a bolt with an arrow left. It says what it does if you research the manual

@tanker242 2 жыл бұрын

@@weazymholla it's not bolt removal mode though. I'm not sure what the manual says but it's basically mechanic mode. Will remove a bolt at full power until it feels no resistance to the hammer mechanism so you don't throw your bolts across the garage, and it will only hit the hammer a few times once you've run down a bolt/nut which should result in approximately 35 lbs-ft or less of measured torque.

@danieldepot4090 3 жыл бұрын

First