Another amazing install cap! With all your custom add-ons you increased the usability of that boat ten fold. Not to mention the value and sellability whenever that time comes. Cant wait to see the mk in action. Last video i said you were a true craftsman. Heck. You're an artisan!

Awesome job! Cant wait to see it work!

Top notch installation! Your boat is very professional!

I really like the way you mounted the batteries!

Very nice! Boat is getting fancier everyday. Definitely well thought out.

I’m learning so much from you, thank you! I’m doing as much research as possible on 22/23 Pilothouse boats and you are a great resource

Nice work ! And the painted cabin looks great. As a reminder, if you didn’t do it yet, I believe the battery charger has a setting specific to the type of batteries you have. I have the same charger, older version, for many years now no issues. 😁.

Your boat looks so clean inside. I swear it looks brand new.

I guess it's official the Crooked pilot house is no longer "crooked". Nice work captain.

I watched your video at the time I saw 7 dislikes posted. I don't know what they were looking at. But you did a nice simple clean installation Good job !!!

Best video yet. Outstanding job!

Nice clean install looks great !!

Thanks for leaving a link to all the stuff cap! Great install. You know your stuff

I am liking this project. Been wanting to get my own done but was worried about the installation. But you make it look easy

Very impressive install. Great work Capt!

Excellent job, your professionalism shows in the clean look of the finished product.

That regular copper wire corrodes very easy on boats, i would try to only use tinned wire on anything that goes on a boat. And then put some dielectric grease on any exposed fittings. Ill even go as far as covering heat shrink terminals with a sealant of some kind. This way your electronics last forever.

Nicely Done!

Well done Cap!

WOW really nice work, I’m sure the sensor is going to work fine on the top. Impecable trabajo como siempre. Ahora a disfrutar del nuevo juguete

I'm here seated waiting for the test . Great work

Increíble trabajo en el barco. Enhorabuena

Awesome video, thanks!

Wuao usted si que sorprende lo exacto que acomoda las cosas en su bote. Sabe tengo 59 años y cuando crezca quiero ser como usted. Jaja 🇵🇷

Great job 👏 Capi 👍

Great video I like your style of installation.

Thanks for this video. It really helped. You have a new follower. I’m starting to watch all your videos.

Great job 🔥🔥🔥

Lol! My boat has the same problem with leaning towards the starboard side and my plan was to do the same with my install of the minn kota, using the batteries as positive counter weight. Good to know that those type of batteries can be installed any which way. Thank you! (I should really get trim tabs but that will be much later)

Video idea! Your minnkota maxes out at about 52amps. If you take a amp clamp meter and find out at what speed setting you are closes to 20amps then your 20amp charger could take you as far as you want on generator power and onboard fuel. Your battery would just be a power cushion. I imagine the video title to be....”How long does it take the Crooked pilot house boat to get 30miles home on generator power”..lol

Great JOB brother. Nicely done. Can’t wait to see it working. GOD BLESS. Be safe out there.

Nice clean installation, you are pro captain

Great job well thought out

Another great installation job. You should really put that sign out front doing installations cap. Great job Safe Navigation

Bien bacano jefe ahora para el agua. 👍👍👍

A very shipshape installation. Sweet.

Damn man you are McGiver latino. Todo lo haces a la perfeccion. Good job.

Well Done Captain.

Great video.

Awesome neat install,

Good Job, Cap.I see in Miami on the Water!!!

Tremendo trabajo capitan! Pal agua a probarlo capitan.

Super video thank you

hi captain perfect idea and work stay and navigate safe Sir.

Love your content I'm following close cause I'm fixing to order the 2420 Parker Sc.

..lookin' good, now all you need is a seawater to gasoline converter ..lol.. stay safe skipper and enjoy..

Awesome !!!!

Cool toy 👍. Make sure they don’t have a small vent.

Capt beautiful job on a beautiful boat. I am looking for a good used one . Keep your boat!!

Nice job captain

We did something similar with the installation of the bluetooth puck. You are going about it smartly. Find what works the best. I think you will find that this motor is awesome. We love ours. Nice install Capt.

Goof job master you the best. Lyuber

💪🏼💪🏼💪🏼💪🏼💪🏼 oye buen trabajo te admiro mucho gracias por estos videos me dan ideas y me ayuda muchísimo 🙌🏼🙌🏼

Captain, you must had some training in woodwork and insulation of thing when you were younger. Your work always look very professional. Great job sir!

Can’t wait to see that work

Thinking of installing the same way to my boat. Awesome video! Tight Lines!

Capt look into a pair of flush cut snips for zip ties. They won't leave the tag ends that can cut you if it's a little ruff and you need to access anything that's tied up

great project, congrats!!! could you share some little diagram, connection to the batery, breaker, and batery charger , please !!!

nice and clean job, but i had like to see how you connected batteries between them. thanks mate

Hi Capt... awesome job; well thought-out! I think you should start your own Marine-Custom-Installations business! I would pay you as much as you want to work on my boat!

Hey Captain, are you happy with those batteries? Did you consider lithium? Thanks for all your awesome videos.

Hey Cap, your videos are not only informative but as important inspirational, appreciate u much. Question: I know the counterweight was a plus for you, not so much for me did you ever consider or have any thoughts about lithium batteries besides their cost?

There goes all the storage for the Bahama trips used up by trolling motor batteries. But we can go flats fishing now. Lol

Man, air conditioning on a trailer boat, that's awesome! heh

saludos capitan tremenda instalación y las baterías están buenísimas hay las estaba viendo en amazon y se pueden montar de cualquier forma 🛥🛥🛥🦀🦀🦀👍👍👍

Another excellent video!! I have a question as I'm installing a trolling motor as we speak. I'm confused why you used black heat shrink tubing on the red wire going to the breaker when it comes off the positive terminal of the battery?

Have a nice day OOTR.long time no see.how its been ?. looks your boat is getting heavier do you plan to change the engine to add a little horsepower or v6 engine

Just wondering if the MinnKota is a 60" or 72" shaft length on that boat. Nice work and great video.

Where do you plug the on board charger to charge those batteries? At home out let or when you run your generator?

Great job once again ! Is there a way you could get power from the outdrive to charge the batteries? I have my stern drive alternator charging my 3 batteries...and also shore power.

Another amazing job, just a question: you will connect this charger to your engine alternator?

Nice job captain but you should always use tin plated wire on marine I’m sure the minnkota wire was tin plated also before I crimp and heat shrink I coat the wire with conductive paste

wow. congratulation :-). in these days, It is a trend to install minkota in korea also. i've installed trrrova 87" 112lb.

What was the cut out pipe for captain i noticed when you removed the carpet and painted it you removed it? Also is that a scrubber on port deck? What gave you the idea to do this minkota

Do you know what adapter to use for the charger for uk use? Or how many Watts it draws..

you do EXCELLENT work my friend. Q: Have you considered 1 lithium battery, to reduce 100lbs weight for better fuel efficiency?

Great video. I need you to install mine.

Are the 3 -12 volt batterys connected in series ? And were do u connect the charger to the first possitive and the last negitive ?

Check out the alternator chargers. While you drive the boat it puts some juice in you’re trolling battery’s

I have a question I'm down in Marathon Florida, I have a Parker 2520. Should I get the 96 inch stingray terrova? Would the 86 be a little shallow on a swell day?

Here’s an idea captain, that boat garnered a lot of fame, wether it’s popular or not lol, I say you auction that thing... I’m betting you’ll get enough for a 2520 or at the very least a brand new 2320 lol.

Bro, with all this equipment...maybe look into buying a yacht ! 😂😂 good job tho Capt.

So do you plug battery charger into the generator or does it tied into the boat engine batteries?

Hi Captain the positive that is coming from the switch is going to what battery. Is it your main batteries?

Captain On the batteries did you use regular bolts in the thermals or did they come with them

Skipper a new system? Tell how you hooked up to power . Thanks

Question. How does the charger charge the batteries? In other words, Does it connect to the yamaha outboard motor alternator, or does it plug into AC power via extension cord from your house or dock? Crazy good job by the way.

What powers the battery charger? I know you said the power is going to the main batteries, Is that enough? Great tip for the batteries, Thank you !!!

Please respond it's urgent! I'm wondering if the main boat batteries is the power source to the charger? We have followed your install very closely. Both this one and the custom install. Pretty much used your exact install for the motor. I thought we could hook the whole system to the main boat batteries to power the charger.

How do you like the AGM batteries? Capt, how long are you using your Minn Kota while fishing? I have a Pro Line 26ft center console.

Have you checked out the Zipwake system? It seriously improves handling/safety and fuel economy and as well gives you the ability to use your autopilot at high speed in safety. Worth looking at

Captain one more question I see you didn't install a alternator charger in the system. Minn kota makes one (why).

Capt how come you didn't use the quick release bracket that minn kota sells

Capt. Where do you buy your starboard from? And is it very expensive?

Hi.. Do you this for a living or is this your boat? Reason i am asking because i have been meaning to install one of the Minn Kotta's on my boat, but i'll need wiring, batteries, etc. et al. Thanks.

What voltage is it running at

How are the batteries holding up?

AGW 6 copper would be better for the current the TM can draw

You just spent a small fortune on Dakota batteries, are you sure it's worth it ? Cheaper batteries couple solar panels same outcome

Any reason why you did not go with minn kota charger also is that charger just for the minn kota motor batteries or can you charge the starting battery as well..