Thanks mate as always I appreciate it 👍 👌 😎

😊👌👍

Thanks 👌 😊

Thanks mate 👍

Yeah its possibly the fastest way to clean old steels up to a reusable state. I try to explain to my customers how bad its going to be with the dust etc its only a small price to pay for something like this so it can serve another good span than the costs involved with replacing it with new.

were all in the blast hood together :)

Very concerned its a huge problem you need to know your media isn't toxic and you also need to know what your taking off ie not sure of your location but US still use lead based paints alot UK have alot of laws that's one of the reasons I say these videos arnt a how too please be very careful and take care alot can go wrong very fast. Only advise I could say is start on something a little easier its not as easy as it looks. Please don't let this put you off but you need to be aware its not just very dangerous to you it could affect anything or anyone that breaths air around you I was told on a course I did duno how much bolx the instructor was talking but a 7 mile radius can be affect with sillic dust or lead poisoning. Ideally you should do some sort of training beforehand 😬 too late for that I wish you luck and please report back I would love to know how you get on 💪👌👍

😊👌👍

😏

😊👌👍

260 and I had to brake off this job as weather was against me

Yeah when the fitters came to take the bits off they fitted a stay bar I will admit I was working on the outside without it I know im a little keen sometimes and I no that's no excuse but I totally get what your saying thanks 👍

@@Mobileblaster it’s always good to keep an eye out for these things however, I’m sure when you risk assessed this job then the responsibility to make the vehicle safe would have been down the the trained and competent operative who parked and lifted the bed for you. It’s all too easy for people to point these things out but ultimately you should just have to check that these isolation procedures have been carried out 👍

@@Invinciblemoam yeah I should have waited for the stay bar but I got sucked into the job and believed I would be fine on the outer side if it did go I wouldn't get trapped between the body and chassis after the fitter came he sorted this along with the removal of the mot plate chassis plates etc

If its not coated after the process yes

Well it depends on the specs you require I've invested and upgraded over years so don't have an exact figure

😂

Don't worry I about em I have a video lined up about the overalls but it kinda needs updating because I've since found more out about them for me to fully make my mind up about something I need to use em on a few jobs to get a full idea of pros and cons I'm not impressed after 3 x use I will explain on later videos 👍

For Business Enquiries Please Email Info@MobileBlasting.co.uk Regards Mick

not enough!!!!

@@kevinharker1840 😂👌

I explain all this in the next video it should have come out 1st but I won't do what the company wants me to do I cannot speak of the details but I will always stay true to my word. Not all business deals work out unfortunately 👍 to be fair I really appreciate them reaching out to me but sometimes full control is better 👌

@@Mobileblaster so RPB reached out to you or its was some who supplies RPB products ? When is the next video coming out ?

@@Moh4n95 not rpb a supplier 👍 its ready but I need to do a bit of legal stuff to make sure I'm OK to publish it. I want full control of my channel with no smoke between the lens. Its a shame we couldn't work together on this as I really believe its a great possibility to make the industry a better place for all 😊 on a positive note I still get to test some free kit out 😬

@@Mobileblaster soud great maybe I should starting to making KZfaq video's too i see now these days a lot small company owers doing it maybe helps to growing business a bit more out. I don't know what your experience is with maybe getting more recognising for the work you doing.

Yeah I would say do it if you have the time video making sucks alot of time up but if you enjoy the process this wouldn't matter 👌 don't do it for financial purposes as I can safely say this niche isn't in the top earning video niches less than 80p per 1000 views and this drops as low as 12p per 1000 don't forget you only get 60% of this too as KZfaq want there cut then you get 20% tax on the remainder so yeah its not worth it for financial gain reasons I actually enjoy makeing videos and interacting with the community 👌 I try to respond to everyone I know this will get to a point I will have to slow down as some days it does take alot of time. I wish you luck if you take the venture and it is enjoyable 👌

I could but this wouldn't help any new guys out as they will get disappointed they cannot match hour for hour takes years to learn how to get speed up and costs down my 1st ever trailer like this tuck 7 days and it wasn't near the quality of this job. What tuck 7 days back then I could do in 2 or 3 hours now 👍 that's the sort of disappointment other guys may feel or I will end up with people saying it's impossible to do said job in said time it's easier to keep it as it is. Thanks for the feedback I appreciate any input like this 👍

I did a stone clean some videos back and said it tuck a day then another company phoned me up saying I'm giving false advice that job couldn't be done in 1 day so when they was quoting 2 or 3 days with 2 guys couldn't justify their costs I'm not about that life I have no reason to lie or try and impress anyone that doesn't help anything so since then I try to actively keep time scales out

He said 7days 🤣 see you in the new rpb suit !

Bc it may have been a powdercoated trailer.... those take 2x as long or more I want to know that Mercedes can hold all that weight and materials for this job Okay you got 2 days on this.

@@jdaspects just waiting on a sponsor to get their bit together I've done a video that's sat waiting as I talk about the suit 👌 and hopefully my viewers will be able to get a discount on everything this company sells hopefully its a win win but 1 thing is for sure I'm not a advert and I won't sell out for my own monetised gains the way this deal works I show some stuff and show we're it can be got with a discount then it's totally down to the viewer what they do with the information so I'm happy with that 👌

If you don't use approved media then yes it's harmful to you and evey thing that breaths air in a 7 mile radius so I'm told I only use sillica free media the air I get in the helmet is grade D air safe to breath but not good quality

Crushed glass 👍

U can use sea sand too, dried of course, that's what we use

Kiln dry sand has been banned since the 60s in the UK because of the free sillica that init please try to avoid using normal kiln dry sand its very bad for your health

😏👌👍

😊🏴󠁧󠁢󠁥󠁮󠁧󠁿

Sorry no jobs available at the moment

Look forward to seen your videos 😊👌👍

@@Mobileblaster f*ck that, I’m retired. It was only constructive criticism anyway. Your technique is all wrong. By aiming the nozzle directly at the substrate, you’re causing a rippling effect, which in turn, will weaken the metal and cause stress fractures. I used to set these machines up and train people how to use DMS machines.

@CymruCelt01 I will take on board any constructive criticism if it's just that. But what you are saying makes no sense. It's impossible to cause the steel any harm the only factor you're talking about won't make any difference to the steel at all. In your 1st comment you say it's taken way too long how long did it take me and did I make a profit? Is my business still in operation after many years? I must be doing something right BUT I do say these videos arnt a how too as people find ways that work for them the way I do things works for me not saying it's the right way but I'm plenty happy enough with how things are going 👍 I would love some professional constructive criticism not from armchair expert that makes no sense in what they type 👍

@@Mobileblaster I’m not some armchair expert! I was a professional, shot blaster! I used to work in the shot blasting industry for many years and conduct courses to those that needed shot blasting qualifications! And you will damage the steel What I said makes perfect sense, and you should use the nozzle at a 20 degree angle, otherwise it will cause a rippling effect to the substrate, which in turn can cause hairline cracks. I actually know what I’m talking about

@@Mobileblaster I never said anything about profit 😂 Whatever pal

Noted and please check out my recent uploads It is something I've been working on 👍 Just as a kind reminder I don't have to make videos, these are just a hobby of mine. Obviously I want to make the best content possible for the line of work I do and I can only do this by trial and error to see what people enjoy 👌 nothing much I can do once its uploaded only improve on the newer videos 👌👍

Please see some of my recent videos I've added a slightly different category of music to try and suit all 😊👍👌

Sorry the Google translate could be off with this. SandBlasting was invented by an American bloke 👌