Moddog GY6 Scooter Gets Nitrous NOS. Way Faster AND Quicker. How to Install

Рет қаралды 4,847

4 ай бұрын

If you want to do this mod safely watch the rest of the long boring video and I will cover everything. Lots to know with this mod.
Icebear Maddog Nitrous Oxide Install and Test. GY6 150cc 50cc Ice Bear. This is the best Speed Mod Yet.
Gear Up Kit • Maddog GY6 150 Gets Re...

Пікірлер: 36

@ORIGINALCONCEPTGARAGE 4 ай бұрын

As long as you run on the right tune shouldn't be a problem as long as its done right which looks like he knows exactly what he is doing so before yall just on to give hell watch this video he knows his shit

@ORIGINALCONCEPTGARAGE 4 ай бұрын

Yeah but brother you did the r&d Which We Appreciate A whole Hell Of Alot Of you doing so. Great job you did wonderful

@Hector_x3 4 ай бұрын

The thing is flying! Keep up the good work and videos!

@GhettoWrench 4 ай бұрын

Thanks

@christophersherratt7299 3 ай бұрын

I got a sym 125cc water-cooled 12.5HP does 70MPH at 7000 rpm that's factory was thinking of putting bigger main jet see if that take it to 80 MPH I'VE been told that the clutch from factory is a 200cc don't know what to do in the uk if you have had car licence like for over 30 years driving all sorts of cars but still need to do a CBT EVERY 2 YEARS the vehicle's on my license allows me to drive all sorts today IT'S ALL ABOUT TAKING 💰 MONEY OF NEW DRIVERS FOR EACH TYPE OF VEHICLE'S A CON JOB I DO REMEMBER THE BLOKE AT CBT TEST SAYING PEOPLE DON'T GET THESE LICENCES TODAY IT'S A FUCKING RIP OFF AM 62 GREAT VIDEOS WATCHED ALL OF THEM 👍👍🇬🇧

@GhettoWrench 3 ай бұрын

Sounds like a sweet ride. Ya certificates and licenses are only to generate revenue. Why do you need a marriage license when anyone cam get married. The big lie.

@ORIGINALCONCEPTGARAGE 4 ай бұрын

Great job with lots of knowledge

@GhettoWrench 4 ай бұрын

Thanks.

@thelagmeister 4 ай бұрын

Yeah this dude has a lot of good videos.

@Bighemi82 2 ай бұрын

Love this video

@ThePitProductions Ай бұрын

It does look cool as hell.

@GhettoWrench Ай бұрын

I ask people to race all the time. They say no way when they see the bottle. They have no idea how slow it is still. LOL

@rustypotatos 4 ай бұрын

You are sick bro omg unreal

@AdamOpheim 4 ай бұрын

Did this with a 6.5hp predator motor. Worked great. Had a WB02 and tuned it to run on E98 running 10:0. Actually ran ok that rich NA. Hit with a 8hp dry shot and it leaned out to mid 11's. You need a draggy meter to see the 0-30 0-60 improvements! can temporarily install the WB02 with lipo RC bats to get the A/F ratio correct.

@GhettoWrench 4 ай бұрын

I have the app to show all the times. My cars always had window and wot switches.. I am just hitting a button on this so was afraid to hit it at slow speeds yet. But I guess I may as well.... it's WOT from the get go. That E85 works pretty good I have heard. I think I will get some and add some more juice.

@peterjohn3180 3 ай бұрын

Provided your mixture is set right nitrous has same effect as a blower. One thing that is usually done is to increase the upper compression piston ring gap to allow for more expansion due to heat. Rpm wise, the variator rollers dictate that, gearing after that shouldn't effect that, it's a mystery to me, like going up a hill shouldn't reduce rpm, weights and torque driver angles is all that should do it.

@marcusriley4105 4 ай бұрын

I have my 1lb bottle filled at Central Welding where I'm at. Any shop that has it can do it if they fill it slow and yes I run a NX E proton kit 20 jet for nos/ 18 jet fuel = 15hp best with 18/16 to be safe.Very nice informative video.👍

@GhettoWrench 4 ай бұрын

Oh cool. Ya I got way too small jet sizes. I called AirGas and they said they only sold big bottles. I should have thought of a welding shop. That proton kit looks perfect. I busted that aluminum piranha fogger and didn't know it was cracked and was giving me fits. I discovered that and got the CF stainless Fogger and it fixed it.

@salisburysteve3104 4 ай бұрын

Great video!

@GhettoWrench 4 ай бұрын

Thanks

@ORIGINALCONCEPTGARAGE 4 ай бұрын

Hell yeah

@ORIGINALCONCEPTGARAGE 4 ай бұрын

My boy is doing it on his 2stroke

@ORIGINALCONCEPTGARAGE 4 ай бұрын

I only run 93 octane with sometimes octane booster in my 232cc 4v Liquid Cooled

@christophersherratt7299 3 ай бұрын

What could I do with out messing around with the piston SHOULD I do The CDI BOX BECAUSE THERE'S GOT TO BE SOME THING THAT JUST STOPS IT REVING HIGHER IT'S FUEL INJECTED ????

@thephranc 4 ай бұрын

Im the 90s we found some mopeds and ran them on RC nito fuel. They didnt last long but my god did they scream.

@GhettoWrench 4 ай бұрын

Ya I can imagine this red button will shorten my engine life quite a bit.

@SuperPooh1961 4 ай бұрын

Ted, did it again! Completely did the none expensive NOS. Now he has to Drag Race the Eagle Lancer NOS guy that went 80mph..lol

@GhettoWrench 4 ай бұрын

@SuperPooh1961 LOL. You didn't watch the whole video. It would have been cheaper to buy the ebay kit!

@SuperPooh1961 4 ай бұрын

Regardless, you need to Race it Now! GO SPEED RACER

@Bighemi82 2 ай бұрын

How many hp wax the shot

@GhettoWrench 2 ай бұрын

No idea... I'm running lower fuel and NOS pressure than the calculator so maybe 2hp. LOL. ?? I'm about to start turning that shit up tho.

@Bighemi82 2 ай бұрын

I got a 420cc with a 8hp kit like this made my 420cc scream

@GhettoWrench 2 ай бұрын

@@Bighemi82 cool. Like a preditor motor? I have a ghost 212 on the coleman

@legotech7 4 ай бұрын

That will kill that little engine with frequent use......won't it?........

@GhettoWrench 4 ай бұрын

An engine is an engine. Guess it will kill about as fast as a regular engine if the NOS ratio is the same. I give it a month. LOL

@ORIGINALCONCEPTGARAGE 4 ай бұрын

Just depends upon how the tune is before using it as long as it's done right and safely it's his do it with but your just trying to look out for him. Hey 232cc 4valve Liquid Cooled I'd my line