makita 18v drill repair rleplacing makita brushes there holder and the motor armature on a makita hammer drill. #makit #drill repair #hammerdrill
Пікірлер: 17
@justinbowers66862 жыл бұрын
Great stuff thanks for the tip of orientation of the motor
@joelshah-rao3010 Жыл бұрын
ah mate you are a legend! I couldn't get it back together then you pointed out that the motor as a locator 'pin' ! Thanks
@FINDITFIXITRESTOREITBUILDIT Жыл бұрын
Glad it helped
@dannyvenegas3086Ай бұрын
Is it possible for only one brush to function while the other does not and drill still usable?
@Biaanca50367 ай бұрын
LXPH03 when the trigger goes bad: it can send +20v and -20v across the battery(BAAAD) and melt the brush holders and mosfet in the process. I guess it was waterlogged or something because I found it on the side of the road yeeears ago. fixed mine by getting a new trigger assembly but maaan that set me back like 40 bucks I still have it today :)
@seanbrechin9422 Жыл бұрын
I've got a dhr264 drill. Had it diagnosed as being the armature... I've just fitted a new armature, but not new brushes. Still no go. Brushes seem ok, though I don't know what could be wrong with them. When I put the voltmeter on the brushes, I get a good voltage... Do you think new brushes would make a difference? I have some on order.
@piecetoyou82859 ай бұрын
May be, but have you checked the trigger, is working correctly,there is a video on how to test for power it is basically a on and off switch , with a protection
@hydrusavitus Жыл бұрын
have you tried pulling the gear and bearing off the armature? I wonder if it is possible to change the bearing without damaging the gear
@FINDITFIXITRESTOREITBUILDIT Жыл бұрын
I have, there manufactured in such a way the gear is pressed on. I actually broke the gear trying it.
@bernardwesterbaan4673 Жыл бұрын
Nice easy video. I've "inherited" a dff482, Brushes were damaged so bought neww ones. Now I find that one of the magnets on the armature is loose (possibly damaged) I presume that best way is to replace the armature? I.e. armature cannot be fixed? Tnx
@FINDITFIXITRESTOREITBUILDIT Жыл бұрын
as its a spinning part and can cause more damage if it brakes off I would just replace it. there not much to buy and easily replaced.
@bernardwesterbaan4673 Жыл бұрын
@@FINDITFIXITRESTOREITBUILDIT Tnx heaps!
@piecetoyou82859 ай бұрын
Dude replace the brushes once you put the motor with the brush holder in the casing first. its much simpler as You have possibly done many times be for.;-)
@barryrrab Жыл бұрын
its the ROTOR! not the STATOR! the Rotor Rotates the STATOR is STATIONARY! clues inthe name really
@brendancampbell8334 Жыл бұрын
Did everything you did change the motor & the brushes put it back together no problem.Then put the battery in for the ‘moment of truth ‘ pull the trigger it moved very slowly then smoke came out the back I give in 🤦♂️
@claudiualex8460 Жыл бұрын
Hello. The brushes are placed last, after the housings are assembled. It is much easier
@seanbeesley1512 Жыл бұрын
I agree much easier to reassemble the tool then do the brushes & springs