Valve Cover Breathers with No Welding Required... Hook up a PCV Catch Can with ease!

Рет қаралды 48,459

Күн бұрын

No More Welding! Drill and Bolt these breather attachments to hook up your PCV Catch Can with ease!
Motion Raceworks part number 32-120 and 32-120BK
Motion Raceworks is trying to make the car building process easier! We developed this Billet Valve Cover breather to provide builders with a simplistic and very effective way to connect your valve covers directly to your catch can systems without welding or fabricating!
Baffling is the only thing standing between you and filling a catch can up in a very short amount of time. Because underneath valve covers and in valley covers oil activity is very prominent, we created a dual baffling system in these bolt on pieces that can be used either or both in keeping direct oil streams from entering these pressurized lines on the way to an engine oil catch can. The external baffle bolts on the outside, the internal bolts internally for underneath rocker areas with little to no clearance under a rocker cover. Both have been optimized to offer as much flow area as the ID of a -12 ORB fitting. This means flow is not restricted, but oil separation is achieved.
Using (3) 10-32 screws, this fitting can adapt to any flat surface large enough to fit the fitting. Questions on overall dimensions? Visit our product listing page for a drawing including sizes by clicking here www.motionraceworks.com/colle...
This attachment uses a large diameter oring to seal to a valve cover. This means if you bolt it to a flat surface, it is going to seal. REMEMBER: PLEASE USE RED LOCTITE ON ALL HARDWARE DURING FINAL INSTALLATION.
These are available in polished as well as black anodized.
The Female portion of the fitting is -12 ORB which allows you to adapt to 8AN 10AN and 12AN Fittings.
For proper sizing for your system feel free to contact us by emailing sales@motionraceworks.com or calling (800) 878-9274 during business hours.
Billet Valve Cover Breather Attachments: www.motionraceworks.com/colle...
Black Anodized Valve Cover Breather Attachments: www.motionraceworks.com/produ...
Motion Raceworks Catch Can (Only: NO Kit): www.motionraceworks.com/produ...
Motion Raceworks Catch Can Kit: www.motionraceworks.com/produ...

Пікірлер: 36

@petersomers3014 3 жыл бұрын

Love this idea and product. I may have to add a few of these to my RB. They love to breath!! Thanks Doug.

@Anthony-df1vh 3 жыл бұрын

I have this set up on my Big Block Chevy that has lots of blow by and it works perfect. However, I have cast aluminum valve covers from Chevy HP and found the o-ring seal didn't work that well so I had to add some silicone to get it perfect. Thanks for solving my leaks MRW.

@vehdynam 3 жыл бұрын

Thanks for the info and that bolt on breather. I will need this for my BBC blower motor.

@larrycarmichael8602 3 жыл бұрын

Great idea!

@jordanh1313 4 жыл бұрын

Awesome this is perfect

@Jason_Bacon 4 жыл бұрын

Man, those would look great on a SBF in a Lincoln.

@RC-fe9py Жыл бұрын

Brilliant!

@DavidVanVoris 4 жыл бұрын

Badass!

@gearheadrat 2 жыл бұрын

will these work well if added to the end s or sides of bb chevy alum valve covers

@onecheekfabadamwilliams8346 4 жыл бұрын

Sweet

@boostaddict_ Жыл бұрын

Currently working on figuring out what all I need to build a hybrid 16v turbo Volkswagen engine and they tend to have high crankcase pressure, the breather on the block isn't enough. Trying to figure out how to vent the valve cover in a way that doesn't look out of place lol, best option right now is to weld an AN fitting on the end of it. If this fits it might be a better solution.

@superstockamx9064 2 жыл бұрын

I suppose this will work well with a Pan-E-Vac system to the header collectors?

@lucasskm8233 3 жыл бұрын

Wondering i saw lot vent hole drill to bigger size.. actually what the benefits?

@gmsmoker95 4 жыл бұрын

We need these for coyotes!

@robertcampbell2236 2 жыл бұрын

hey brother im rob from australia, i have an alloy fsbricated valve covers on my small block chrysler. they have a breather hole in each one, about an inch. will you breathers cover that? thanks

@rodneyhaimes2915 2 жыл бұрын

Do you run or have a vacuum pump on your Nova ??

@goosseperformance1444 4 жыл бұрын

Take my money!

@justinw6448 4 жыл бұрын

can this still work with the stock valve covers with the coils still mounted on top of the valve covers

@MotionRaceworksOfficial 4 жыл бұрын

Justin Wilkerson unfortunately I don’t think they’ll fit with factory coil location

@493john 3 жыл бұрын

Will this work with a vacuum pump?

@sledgiefd9070 4 жыл бұрын

And purchased in anodised black...ticked all the clearance boxes!

@youtubeincel5812 Жыл бұрын

Nice product but welding is superior because then you don't have to worry about internal fasteners coming loose in your valve train.

@Bledsaw89 3 жыл бұрын

Just ordered a set for my supercharged fox, my trickflow valve covers arent baffled and the catch can was filling up way too fast. Hope this takes care of the problem.

@MotionRaceworksOfficial 3 жыл бұрын

It sure will!

@robertelmo7736 3 жыл бұрын

@@MotionRaceworksOfficial So are these big enough to cover the standard hole in the SBF valve covers? I can measure my holes if you can provide the measurements of the template. I just bought a Vibrant dual 10an can and want to run a 10an from each valve cover. And stop these leaks from those big rubber grommets. I think they are 1" or so?

@henryros3432 2 жыл бұрын

Travis Bledsoe How’d they work out? I Have turbo fox with valve covers not baffled and my catch can is filling fast also. It’s Causing oil leaks.

@Bledsaw89 2 жыл бұрын

@@henryros3432 worked perfect man, highly recommend. Stopped nearly all of it from filling my can.

@henryros3432 2 жыл бұрын

@@Bledsaw89 sweet going to order them. I appreciate the help. Thanks!

@georgeowen3506 2 жыл бұрын

This thing is really expensive dude. I could do 4 bungs for that price, with hoses and fittings.

@Adam_B 2 жыл бұрын

Was hoping you might briefly explain the concept, but you basically just said "do your own research on why you need to buy my expensive part"

@ze_german2921 3 жыл бұрын

Weldable bungs $10/pair, pair of these is $380, let me get some after I win a few rounds of wheel of fortune.

@christopherw7648 3 жыл бұрын

They are $179 a pair.

@nintendogamer5472 2 жыл бұрын

@@christopherw7648 that's still so much.

@mikeeagle2653 4 жыл бұрын

Should do videos in empty rooms it echoing like crazy and takes away from the great info you provide

@millionare46pk 4 жыл бұрын

Dude rambles way too much.