🏠 How to Assemble Craftsman's Large Vertical Shed
Рет қаралды 90,809
Күн бұрынCraftsman’s large resin vertical storage shed is an awesome way to add some needed storage for your outdoor tools, or really… anything! In this video, I unbox the shed and show you how to assemble it, step by step!
amzn.to/3GA2K2z
Related video (my older shed from 5 years ago):
• Craftsman Outdoor Stor...
FOLLOW ME:
Instagram: / chrisduketv
Website: chrisduke.tv
MY RECOMMENDATIONS:
Products on Amazon: chrisduke.tv/amazon
Royalty-free music: chrisduke.tv/epidemic
Manage your videos: chrisduke.tv/tubebuddy
MUSIC USED IN THIS VIDEO:
“Paw Prints” by Bob Hart
“Portal” by Oliver Michael
chrisduke.tv/epidemic
0:00 - What's in the box?
0:20 - You'll need a pickup to pick it up
1:05 - Unboxing
1:27 - Parts included
1:49 - Tools needed
1:55 - Assembly overview
2:24 - Left panel
3:39 - Right panel
4:40 - Secure back panels together
5:20 - Door latch installation
6:03 - Door hinge installation
6:50 - Roof hinge installation
7:20 - Anatomy of underside of roof
7:33 - Door clip bracket installation
7:56 - Support bracket installation
8:44 - Roof installation
9:15 - Door handles installation
9:28 - Roof lock installation
10:10 - Assembled video
10:29 - Two more tools to use!
11:14 - Final thoughts
12:10 - Loading it up
@chris 3 жыл бұрын
Want more? Check out this video from a few years ago on CRAFTSMAN sheds: kzfaq.info/get/bejne/jc-SbL1jmeC6qpc.html
@therhythmatic 4 күн бұрын
Thank you so much for sharing. Moving this thing proved to be a lot harder than I imagined 😅
@michaelcaddell8520 3 күн бұрын
Snagged one of these for $50 off Craigslist the other day. Thanks for the video, helped me big time!
@elsahelm8834 2 жыл бұрын
IF IT WAS NOT FOR YOU, WE WOULD HAVE NEVER BEEN ABLE TO BUILD THE SHEDS WITH THE INSTRUCTIONS GIVEN. THANK YOU SO MUCH!! KEEP MAKING GREAT HOW TO VIDEOS.
@chris Жыл бұрын
You're very welcome!
@charlesesther691 3 жыл бұрын
Absolutely the best instruction video I have viewed to date. Followed every step and did not have any issues! Fantastic and well done!
@mirandajonte5930 Жыл бұрын
Dude. I just put mine together this morning and I did it alongside your crystal clear, excellent guidance. THANK YOU.
@lynnmossbarger9520 3 жыл бұрын
Wish we had looked for this video before we started the assembly!!! This made it SO much easier to figure out, as the printed instructions that came with the shed were very hard to understand, especially the black roof support bracket and roof locks. You saved us ... thank you!!!
@chris 3 жыл бұрын
You're welcome! I'm so happy it helped.
@user-ge3ub2qs8u 11 ай бұрын
Very well done, especially the assembly of the door hinges, as the instruction manual was not well done concerning them. The steel roof bar in my kit was raw metal, so I cleaned the tape goo off, degreased it, primed and spray painted it black. All else went together nicely. Thank you, Duke.
@normhalliday1640 4 жыл бұрын
Just finished assembly. Chris your instruction video was spot on. Made assembly a breeze.
@chris 4 жыл бұрын
My job is done here. #dropsmic (seriously, thank you for the comment and I'm so happy it helped!)
@juliovalencia256 2 жыл бұрын
Thank you so much i just put mine together and it didn’t have a manual since i got it for $50 and its super nice . Also i used a drill carefully with 0 issues
@esmeraldaquiroz2997 3 жыл бұрын
THANK YOU SO MUCH FOR DOING THIS VIDEO!!! 😭 my partner and I just got this same shed and it took us a couple hours just to get to the part where you put the door hinges on the opening doors. We were able to finish out the rest of the shed smoothly after watching your video. 😭❤️❤️❤️ your a real homie! 🖐🏽🙏🏼🙌🏽
@michaelmoss5976 3 жыл бұрын
Slapping mine (Suncast BMS5700) together tomorrow....glad I thought to check KZfaq for a few pointers! You can bet I'll have your video handy during the build! Thanks!
@josephgraham1065 4 жыл бұрын
Great video, I purchased for 299 at lowes and did not even open up instructions after watching your video twice. Great job thanks. fully assembled in 2 hours. It did fit in the trunk of my Nissan Altima while it hung out the back a little but got it home no problem just tied the trunk lid closed.
@chris 4 жыл бұрын
Awesome! I'm glad my video helped! Thank you so much for the comment Joseph!
@gliteratti Жыл бұрын
Your video proved incredibly helpful. I tremendously appreciate your work on this!
@raelynnecook9734 Жыл бұрын
Best instructional video ever! Never needed the manual instructions, only but to try to figure out the roof lock. The parts were different. My 5x2 Craftsmen Shed had two plastic right angle pieces to screw into the roof with 4 screws on each side. Still have 6 screws left. Still trying to figure out where they go. Not sure why thy changed the roof piece. My guess it was cheaper to use the plastic then metal. Whose knows it looks great. Thank you.
@kotenable 3 жыл бұрын
Thanks for saving my life on the black support bracket and the roof rocks. Your clip is just an awe.
@chris 3 жыл бұрын
Happy to help!
@kathy163 2 жыл бұрын
This was so helpful and to the point. I am grateful. I built mine on my own within the hour! 5'2 115lbs. IDK why everyone on the Lowes site was complaining it was a breeze.
@chris Жыл бұрын
Probably because they came here and watched this video :)
@law626 4 жыл бұрын
Thank you! This video helped speed things up quite a bit. Took about 2 hours with the help of my 7 year old. Instructions were great but some of my pieces were a little warped. Had to do a few adjustments. The quality isn't as good as a Keter model of similar size. Too lazy to take it apart and return so will use it. Thanks for the video.
@chris 4 жыл бұрын
Glad it helped! Than you VERY MUCH for the comment.
@geoffreypatton3712 2 жыл бұрын
The box mine came in was destroyed by rain so the instructions were also, so this video was a great help. The screws for the hinges I was provided with were a size to large. I just drilled out the threaded hole on the hinges with a 7/32 drill bit and then I could get the screw in. I had to start the screw before I put the hinges on though then tighten them down after the door was fully on.
@StacyGoff 2 жыл бұрын
Excellent and engaging style; informative and useful content. Thank you very much!
@rossmckenzie6983 3 жыл бұрын
Thanks! You saved me on the metal bar. Great video!
@karendisorbocimarron-memor8427 4 жыл бұрын
This really helped where we were getting stuck! Thank you
@chris 4 жыл бұрын
Thanks for watching, Karen! I'm stoked that it helped you out. It's an awesome shed!
@brendawagner6143 2 жыл бұрын
Just purchased this shed. Getting ready to put together, I hope.
@RDGardea 4 жыл бұрын
Thanks for the help. The roof bracket bar was too small to make out in the directions. Then you made the roof secure feature easy to follow. Thanks.
@chris 4 жыл бұрын
Glad it helped!
@CameronBales 4 жыл бұрын
This video was a giant help. The shed is well designed, and the instructions are good, but the video showed all the steps, and underlined all the fiddly bits. Thanks for a great video.
@chris 4 жыл бұрын
Cameron, you're the best. Thanks for watching and for the feedback. I'm so happy it was helpful! Enjoy the shed!
@CameronBales 4 жыл бұрын
@@chris I just found the best part - the full Table of Contents to each section of the video - including the fiddliest part: 6:03 - Door hinge installation
@chris 4 жыл бұрын
Yessir! That took a little bit to figure out. The new chapters feature of KZfaq is awesome!
@ColinAtAcura 3 жыл бұрын
This was a great video, super helpful. It really made assembling my shed much easier. Also, kudos on production quality
@chris 3 жыл бұрын
Thank you for the awesome feedback!
@soekaroo 3 жыл бұрын
Thanks for the video. Helped us get our shed assembled.
@chris 3 жыл бұрын
Glad I could help!
@txkos 3 жыл бұрын
Thank you sir! I used your video for my Suncast BMS5700.
@chris 3 жыл бұрын
You're welcome... Glad it helped!
@Daenu66 4 жыл бұрын
I struggled the most with the back panels. The manual didn't explain it clear. Thanks for this incredible how to video Chris!
@chris 4 жыл бұрын
So glad it helped you out, Daniel. I agree, the instruction manual wasn't the best--I think I said that a few times in my video haha. I'm hoping a lot of people and this video and it helps them out too.
@meesterjalapeno8875 3 жыл бұрын
Thank u so much for putting this video 2gether it was a life saver or should I say shed saver cause I couldn't understand where that bar went or how to secure the roof and thabks 2 ur video now i know 👍 great job
@chris 3 жыл бұрын
So happy I could help!!
@franlum 2 жыл бұрын
You did a wonderful job on how to assemble. Should add how to use a screw driver to line up the hinge holes, and use soapy water to slide the walls on which will require less mallet pounding.
@josephinecuffaro252 3 жыл бұрын
OMG THANK YOU FOR THIS VIDEO. I THOUGHT I WAS GOING TO DIVORCE MY KNOW IT ALL HUSBAND. ALMOST DONE EXCEPT TO ANCHOR THE ROOF. NOW TO MY BOTTLE OF VODKA TO CALM THE NERVES. LOL.
@chris 3 жыл бұрын
Haha Cheers! 🍻
@JT-qc2nb Жыл бұрын
Great video and thank you! Got it done in 45 minutes.
@wanttosendavideo 11 ай бұрын
Had not trouble until the metal Support Bracket. Couldn't figure out which direction and where it belonged. Instruction Manuel wasn't too clear on that. Thank you so much for you clear explanation.
@chris 11 ай бұрын
I'm so glad that my video helped you out!! Thanks for the comment!
@lifeed661 3 жыл бұрын
Lots of help thanks man lost manual this saved me
@joybrooks8725 3 жыл бұрын
Thank you. This video was very helpful.
@darrenduffy Жыл бұрын
Your video was so helpful! Thank you so much!
@ryanrhoades7401 8 ай бұрын
Thank you. Couldn't figure out the support bracket👍
@victorrios6109 Жыл бұрын
Thank you for the tutorial. Congrats on that sense of humor.
@user-wv6cu8zh4w Ай бұрын
Thanks! Really helpful!!
@demo2finish 3 жыл бұрын
All that Craftsman products and those navy Vans tho' .. On my way to the backyard to put mine together. Thanks for the tutorial.. Cheers!
@Uncle-Bull 3 жыл бұрын
Three tips: First, it’s okay to use a variable speed drill with the clutch (use one with a clutch) and speed control on the lowest setting. Second, run the bolts through the hinges before assembly. This wears some of the finish down beforehand and the bolts are easier to insert. Third, the small screws and the bolts are not the same size Phillips head. Make sure you have a #2 and a #3.
@mccalejk2 Жыл бұрын
Going to have to disagree with point #2. I found putting the bolts in first made it more difficult to attach the hinges to the sides. Maybe you meant insert them and take them out? I didn’t have any issues putting the bolts on after the fact.
@salsapete2132 2 жыл бұрын
This is identical to the Suncast 5700 series but it did not bring the two front L hook for the front roof support I will have to improvise on that one. I viewed several videos on assembling these shed. Your video is superior to all of them excellent job. Mr. Tool Time guy.
@meditationworshiprootedint2964 2 жыл бұрын
Excellent vidéo. Very helpful.
@peppercherrybomb 2 жыл бұрын
I e had such trouble with this shed. First, the roof support bar that came in the box was twisted, so I had to wait for a replacement to arrive. Now one of the hinges won't clip into the roof. I came to watch your video again to see if I could find an answer but yours went together so easily.
@ocbruck8254 Жыл бұрын
I just assembled one of these yesterday, and your video made assembly a cinch. Thanks so much. One question: The side panels and the back panels have a total of 6 chest-high threaded holes that are unused. They're fairly large (maybe 1/2"?). Any idea what their actual size is and what they might be used for?
@osdanyolivera8751 2 жыл бұрын
thank you very instructive
@briandapice 3 жыл бұрын
This was a great video, thank you for posting. What Craftsman doesn't tell us is you should put some WD40 or something on the end of the hinge screws because it is a difficult drive other wise. I think I stripped the first one because after not being able to get the screw in I lubed the rest and they slid in easily. Only recommendation I have on top of the insights this video offers.
@yavuzc 3 жыл бұрын
Thanks for this useful video. I literally did not need a manual. A fewcorrections: 1) the box fit into my Tesla S with rear seats folded, so it may also fit into bigger cars 2) the ceiling does not seem to have those lock pins anymore, instead screwed 90 degree brackets at the front
@lane1903 4 жыл бұрын
Thanks man, this was awesome
@chris 4 жыл бұрын
Thanks for watching, Lane!
@ssheldon1616 2 жыл бұрын
Good video, thanks. Roof bracket threw me for a bit.
@ocean1233 2 жыл бұрын
Thank you for explaining the hooks. So strange. I didn't finish building mine tonight because....I can not figure out how to install them???? The roof is all I have left to install. I found the hinges to be a pain. Looking forward to completing this tomorrow morning 🌅 Thanks again!
@bassmattymc 4 жыл бұрын
This is also marketed as the Suncast BMS5700 Shed (Wayfair). It may be a discontinued model? Anyhow, This thing was a bit of a pain in the backside. 2 sets of instructions noting "addendums". +36 degrees outside, sweat in the eyes trying to refer to both sets of instructions. Thank you for taking the time to create and post this video.
@chris 4 жыл бұрын
This one isn't discontinued... it's available right now at Lowes. Thank you for watching and I'm so glad it helped!
@chadmanalbay8487 Жыл бұрын
Thank you! I had problems with the hinges...and the metal bar for the roof...but it's done. Just wondering instead of shelves, what hooks could I use?
@BigDandthegirls 4 жыл бұрын
Helped me throw it together in a few minutes with the help of my girls. Thx sir.
@chris 4 жыл бұрын
That's awesome!! So happy it helped. Hope you had a fun time with them!
@Hanchoforeign 3 жыл бұрын
Thank you!! Very helpful
@chris 3 жыл бұрын
You're welcome!
@artistwithoutaloft3774 2 жыл бұрын
I put together the smaller version of this shed 4’x2’ with roof that raises and had zero problems with the hinges and screws/bolts. HOWEVER, with this large version, I had the same issue experienced by others in that the bolts would not thread into the opposing hole…no matter what I tried. I put the bolts in before mounting them on the doors to make sure they would thread. It will go into the primary hole just fine but absolutely WILL NOT screw in any further. I even called Craftsman to complain 🙄 and was told to take photos of “the problem” and email to them. I ended up mounting the doors anyway and am hoping they stay on. I might try a drill once the battery charges because a screwdriver ain’t gonna do it!
@karenmontgomery7880 2 жыл бұрын
Thank you so much.
@rinkushrestha6096 3 жыл бұрын
Awesomely explain
@rinkushrestha6096 3 жыл бұрын
I love this!!!
@tom75411 Жыл бұрын
I had trouble getting the provided 1/4” machine screw into the threaded hole of the door hinge, no matter how I tried. So I used a slightly smaller #12-24 x 1 1/2” stainless steel machine screw with a matching #12-24 stainless steel nut. It’s a tight fit getting the nut in, but with a little patience it’s doable. I did have to use a thin head wrench (7/16” I think) that I purchased from Home Depot to tighten the nut. So if you can’t get the door hinges to work with the provided machine screws, try using a smaller machine screw with a matching nut.
@CJohnson01234 Жыл бұрын
Hey I live in a hurricane state of Florida and I want to attach the shed to the side of my house. I built a wood foundation and I'm thinking I could use some tie downs to secure the foundation. Any tips?
@nmope 9 ай бұрын
Super helpful video and got the install done in a few hours without help and taking long breaks! Question: after assembling it, how do you recommend transporting it to the final location?
@chris 9 ай бұрын
I just pushed and pulled it outside my garage, around the side of the house to the back yard. It's fairly lightweight and was easy to do it by myself. Thanks for the comment and I'm glad my video helped!
@ronmusic4life 4 жыл бұрын
This was a big help
@chris 4 жыл бұрын
Thank you for watching & responding! I'm happy it helped you out!
@fezenstein Жыл бұрын
I got 5 of the 6 hinges to screw. The last one I can’t get to even start catching within the threads (I was starting them before attaching)
@mojavedesertsonorandesert9531 Жыл бұрын
The last time I had a pair of Vans like yours they were made in Orange, CA, USA!
@mplotner23 3 жыл бұрын
Anyone else's doors constantly fall off or did I just suck at installing the hinges?
@esmeraldaquiroz2997 3 жыл бұрын
Dude me too, it took my forever
@MrRalphF Жыл бұрын
Great video. Owned this for a couple of years ago and am starting to think about putting in shelves. Before I do so though, have been trying to figure out what the holes are for, about chest height. Two on the back wall, one each on each side wall. Any ideas?
@chris Жыл бұрын
I believe there's some how-to information in the manual that came with it on how to build your own shelves to put in there.
@mmhphotos 2 жыл бұрын
Is there a way to secure it to the ground? Are there locations for concrete anchors?
@user-bk7gi4kh8n Жыл бұрын
thank u I just sent this to my husband so he can use your directions instead of the directions that came with it ..craftsman*s directions are too hard. Thanks ur the real M.V. P.
@JohnBlakeJr 4 жыл бұрын
“Well, Hideeeho there neighbor!” 🤣
@chris 4 жыл бұрын
It's the little things that keep me entertained 😂
@NEVY503 3 жыл бұрын
Nice Assemble guide!! I did mine without looking the Manual. I just watched this video! Great work. Thank you very much!!
@berrienbarks7393 2 жыл бұрын
My door didn't come with the roof lock to keep front of roof closed. It also wasn't in the manual listing of hardware. Was this a add on? Or am I missing parts? Purchased in 2021.
@mikey7767 8 ай бұрын
thank you for clarifying where the metal bracket goes since the drawings in the instructions do not show clearly. One pointer.... Brooms go bristles up so they dont get ruined and swashed.
@christanzley8041 4 жыл бұрын
54:00 minutes. Thanks u so much for the helpful video.
@chris 4 жыл бұрын
Glad it was helpful! You were a lot quicker than I was at it :)
@sicamousshuswap 4 ай бұрын
What is the minimum size base to build to place floor on?
@KevinMHyland 3 жыл бұрын
Great video Chris; it was a tremendous help, but after five hours trying to thread the screws into the predrilled holes in the hinges, I have only succeed in securing two of the six hinges. I notice your video quickly skimmed over that task; any chance you have tips or a more focused video?
@CynicalPerm 3 жыл бұрын
I was having trouble with this too. A little tricky because there's no track that guides the screw from one side of the hinge to the other. Make sure the corner of the hinge has fully hooked into that groove in your side wall. Support the door as you're working. Someone mentioned further down that screwing this in will take some brute force so you probably will want to use a drill. Make sure your screw is aligned with the exit point. If the screw is still locking up it may be worth checking that youre able to thread it through the hinge when it's off the door.
@raylonsmith100 3 жыл бұрын
Same exact problem. About took it back to Lowe’s! 😡
@ra01tm 3 жыл бұрын
I used another tool to “pry” the hinges up, from between the door and the wall part of the hinge. It helped me thread the screws, as the part of the wall the hinge attaches to, gets in the way. I had to hold the hinge in a pry up position, if that makes sense.
@Sayble 2 жыл бұрын
75% of the screws weren’t lined up for me either!
@TheRickbell 3 жыл бұрын
Read the instructions and Yes CONFUSED. your video really helped. Question. Interior walls at about 4 feet up is a bolt patters on all walls. Would you know the bolt size and thread?
@neilrazdan1457 4 жыл бұрын
Is this really that easy !! I bought one two years ago. Haven't opened the box yet. My old one not the same as this, is bent all out of shape over 18 years. It is time to open the box , I guess.
@chrisgladstone7510 11 ай бұрын
Honda mini van holds it just fine.
@pfx245 Жыл бұрын
Hello Chris, thanks for video. I'm trying to remove the roof. Tried to pry it open but the hinges are stuck and do not budge. Any ideas ?
@chris Жыл бұрын
I haven't tried to disassemble mine yet! It's still outside where you see at the end of the video holding crap :) Might have to wait for a warm day, leave it in the sun to warm up and then try again.
@pfx245 Жыл бұрын
@@chris Hey, thanks for reply. I was able to take it apart.
@joelesosa7981 Жыл бұрын
What size bolts I need to add a shelve?
@John-tp5jz 2 жыл бұрын
Anyone have any good links / ideas to purchase some good shelving for this great shed? Prefer the same resin type like the shed materials itself, any help would appreciated?
@MrSibugryan 3 жыл бұрын
How do you cover small spaces inside?
@cryptocomplete Жыл бұрын
Would you recommend caulking around all the seams to make it more water proof? Great video. thank you!!
@chris Жыл бұрын
I live in San Diego (not the wettest climate) however I haven't noticed any water in mine. It definitely couldn't hurt though.
@cryptocomplete Жыл бұрын
@@chris I did wind up caulking the back wall center and side seams from the outside, but I decided not to caulk the top edges in contact with the roof because I assume it would need SOME sort of ventilation for air flow. Otherwise any dampness might develop into mold. I am also trying to put some sort of "gutter" or diversion barrier along the top front edge of the roof so water doesn't run off the roof and down the front door.
@chris Жыл бұрын
Nice. It's good you thought to leave some ventilation in place because you're right... it still needs to breathe in there!
@jamesdevito293 3 жыл бұрын
Regarding the hinges, it seems that the powder coating got on the threads so break in the holes by screwing the bolts into the holes before the doors go on. Trying that right now, and great video. I’m having my vodka whilst assembling...!!
@khmerlbckid 3 жыл бұрын
I just loaded two of these in my 3rd gen Toyota Prius.
@mrsmamacastro 4 жыл бұрын
thank you for this video. It really helps a visual learner like me. : ) BTW, you did an excellent job.
@chris 4 жыл бұрын
You're very welcome! Thanks for watching AND taking the time to comment!
@jamesdevito293 3 жыл бұрын
Update to the hinge screw issue. You can actually start the screw into the hole and then mount and then tighten. The screw doesn’t pass thru a hole or anything like that it’s a V cutout that it goes into...
@Laura-cr6ki Жыл бұрын
Mine didn’t come with a lock for the roof or a door clip
@mcmickey3344 17 күн бұрын
what about if it is waterproof? My 6 feet by 2.5 feet wide shed has big gaps in the roof area along the back... concerned about rain coming in. any thoughts?
@chris 3 күн бұрын
Mine's still in use as of today and with a lot of crap in there, I've never seen any of it wet.
@robwmac 3 жыл бұрын
The hinges are not held by the screws at all. I have no idea what Craftsman was thinking. You can literally rip them off with little effort. kzfaq.info/get/bejne/a8-UfMZz2pu1enU.html
@hottyatthedisco 4 жыл бұрын
I need an experts advise: should I look into building the wooden platform or can it be put on top of regular patio tile?
@chris 4 жыл бұрын
Your patio tile should be just fine! The reason for a wood platform would be if you were to put the shed outside on uneven ground, or ground that's susceptible to moisture (dirt, gras, gravel, etc.)
@hottyatthedisco 4 жыл бұрын
Wow! Thank you so much for responding so quick! That’s great news! I’m going to get to work hahaha 💕
@chris 4 жыл бұрын
Let me know if you get stuck and I'll try to help out!
@kenkrahl9005 4 жыл бұрын
What are the threaded holes for on the right and left walls? Do they make accessories or something to go in those? :-/
@Uncle-Bull 3 жыл бұрын
That’s what I thought. Going to online to look.
@chipswain 2 жыл бұрын
Ha! Saved my marriage. I almost quit putting it together then remembered youtube. Thanks for the help!
@ppumpkin3282 3 жыл бұрын
Looks good, I'm looking to buy one. But once you get that lawnmower in there, there's no much room for anything else.
@oaug 2 жыл бұрын
Could you fit a push mower in there?
@chris 2 жыл бұрын
12:08
@jenniferlynn6691 3 жыл бұрын
During hinge installation, how did you get the screw to go all the way through. No matter how I've attempted it, it won't screw through as your shows.
@jenniferlynn6691 3 жыл бұрын
Brut force. That's the answer
@chris 3 жыл бұрын
Correct! :)
@foxtrot0307 2 жыл бұрын
How does it stand against rain? Does water get inside?
@chris 2 жыл бұрын
None that I've noticed
@robertball2144 3 жыл бұрын
Hi Chris: I just watched your video and my concern is the hinges 3 on each side. I can't seem to screw in the BB screws through the clip. What am I doing wrong? I'm anxiously awaiting your response. Thank you Robert
@chris 3 жыл бұрын
I recommend you trying to put the fasteners into the metal clip before trying to do it with the door on. Make sure they go in correctly, and then you'll know the correct angle that it needs to be for the threads to take it properly. If they still won't thread properly, it could be either that A) you stripped the threads or B) it wasn't machined properly. If either, then you'll either need a tap & die set to correct it, or contact CRAFTSMAN for replacements.
@robertball2144 3 жыл бұрын
@@chris Thank you Chris
@robertball2144 3 жыл бұрын
@@chris Chris with your knowledge I was able to screw in 5 of the 6 hinges. I will call sears to replace 1 BB screw and hinge because they never lined up and they are stripped. Thanks again for your video and expertise.
@chris 3 жыл бұрын
No problem! So happy it helped! I hope you mean Lowe's though. Sears doesn't sell the NEW Craftsman products like this shed.
Comedy Club
Рет қаралды 7 МЛН
Webspoon World
Рет қаралды 2,7 МЛН
Arslan khan_007
Рет қаралды 19 МЛН