Рет қаралды 4,244
UPDATE!!!! That lower piece that I thought couldn’t be removed can. It is on the bottom corner of each side. There is a 9 mm nut. If you can’t remove cause it spins you can still pry off and will have to replace bracket. Latemodel Restorations new brackets changes the design flaw. You will have to source your own nuts with the new brackets.
Fixing bumpers wanted to share. Inside the hatch 4 nuts under neath the taillight nuts. Then 3 nuts per rear corner. FORGOT TO MENTION IN VID get underneath the car on each rear lower section of the GT 2 nuts facing towards the rear of the car. Last get the 6 plastic fasteners that are directly underneath the rear bumper. 9mm deep socket and wrench for all the nuts.