Indeed, sound was quieter on the second-ish part of the video, but still audible with no problems. I would highly recommend putting up the post processor to github (or equivalent). Then it's easy to follow if you make updates to it and also easier to find for search engines etc. I keep my linuxcnc lathe post there for these same reasons. Not that anyone besides me is using it, but still :) Great work on the post, thanks!

@@vilts Thanks! I will look into using Github. :)

any sounds is confortable when see the application of the video

Hi, thats great to hear there are others using my post still. I have not maintained it in 3+ years so I am not sure why rigid tap does not work.

Interesting, I will watch out for that. I like cutting stainless so I used that for the mandrel, but maybe I should switch it too a mild steel one then. Thanks for the tip. :D

Thank you! The next vid is 90% toolsetter. I go into it in great detail. I'll upload the FS360 model for download as well. :)

No, bc they updated the program and I haven't been able to program parts this way anymore. 😕

Gotcha

It means "in real life" ;)

@@LucasIsBusy Is necessary use G43 H01 in g code, or different WCS for each tool is sufficient in the strategy or method lathe as a mill?

@@miguelzambranojr I used G43 to tell how long the workpiece was and G54 for where the tools were. You have to flip flop the WCS and tool offsets bc the workpiece is in the spindle.

Lucas Is Busy how can i modify my post to generate G43 H1 line ? Or could You throught manual nc?

@@miguelzambranojr you can modify the post for sure, but it will post out the G43 H01 command automatically....i think. It's been a while since I used that post so I'll have to go check. The G43 tells the machine how long the workpiece so it should be in there for sure.

It means "Becuase". I guess I should have cleaned up the post before issuing it.