You should get a 5 ton floor jack for quick changes and a 18 Volt Impact Gun for quick tire changes on the roadside. Good job and getting this handled

Man no semi truck moved over as you were repairing that tire.... I always move over for any vehicle on the shoulder when safe to and if I can’t move over I slow down... never know man it’s some scary stuff out there but be safe brotha and keep on trucking, 18 wheels on the concrete 🤙🏼

Driver !! Driver !! wouldn't it be much safer to " limp" and exit -off the highway to change that wheel? Stay safe and keep trucking.

You need to invest in an impact wrench battery operated save a lot of time and headaches. 🤔🤫🤭👌

A couple of things to consider: Do you still have the Goodride tires that came with your trailer? It looks like it to me. They're some of the worst tires available. I had 3 blowouts with them and finally replaced the remainder with Sailun and Ironman, which seem to not have the random, complete failures when loaded near capacity, and the tread doesn't feel soft and sticky after a few miles, either. You might get more miles out of Goodrides, but having some of them replaced and just carrying one or two as unmounted spares is a good low-risk use for them. Jacks and lug wrenches take a lot of time and effort. Buy or make yourself run-up blocks (or use your dunnage) to drive-up on with the good tandem tires on the side, and carry a good electric impact (Ridgid makes a nice 1/2") and you can have a wheel changed in less than the time you'd be required to deploy your triangles. With a couple sets of run-up blocks or more dunnage, you can even get a whole axle off quickly.

Shit happens man . Am glad you and your load is safe . Man that highway was crazy . Well what doesn't kill you make you stronger 💪💪💪☺

1 you need an impact drill 2 you need a stronger taller jack 3 always have atleast 2 spare tires (4 )14 or 16 ply tires moving forward 5 truck stops minimum tire size is 17.5 size tires 6 time to change your hub axle oil 7 👍👌

Glad you got it changed. Glad the wood worked AND glad you had a bottle jack. Roll on.

Sometimes it’s easier to just roll back on a 4x4 post instead of getting on the ground to jack it up. (If you don’t want to get dirty) Safe travels man! 😎

Necessity is the mother of invention, 😌 I liked the way wooden panels were placed under the jack👏🏻

I appreciate the videos buddy, keep on trucking and stay safe.

Be safe bro, we are praying for you and for your success because you are a hard worker

Wow! Glad your safe! Good job and good luck 👍

Glad you are safe !!!

Glad you were able to pull over enough to change it safely. Flat tires can be the worst. Hopefully you can find some better tires.

I'll say on thing about you, you're pretty fast changing those tires out and around blind that ! Great job !

Yousif first comment I win, lol man hope everything's going good after that, is part of the job my friend keep on trucking

Love that you are living the dream! I hope I can join you out on the road as a fellow business man soon. Have a safe trip and a fine ride!

I just ordered my impact wrench from home deapot they have what I think it’s a good deal in the Milwaukee Fuel hi torque $249 with one battery, the charger was another $59 but for $325 i think it’s not bad. I might be over thinking but I know I’m going to go through that as well, and when it happen I want to be out of the danger zone as soon as I can. There’s a lot of people that don’t care about vehicles on the side of the road and pass by flying, they don’t even reduce their speed. I’m glad you guys are good 👍🏻👍🏻 thanks for the content!!!

I watch 2 of your videos everyday. Thank you and god bless you

If those are Dexter axles, they say Do Not jack on the suspension parts or axle tubes. You should only jack on the trailer frame. I question if you are getting the wheel lug nuts tight enough with that spinner wrench. I know the ones on my trailer are supposed to be torqued to 200 ft lbs.

Good job yousef have a good day bro from morocco take care of yourself 🙌🖒💟❤💙💜

Check out your bottle jack. If you try unscrewing the very top of it you should find that you can screw out about 4 inches of screw. This screw adjustment is so you can get absolutely the most lift out of the jack. I've never owned a bottle jack that didn't have an adjustment screw on it.

Good Job. Things happens. Take care.

Way to get that handled! Good job!

If im not mistaking the reason why your hub is hot is because it's not greased or to little greased. Also your hub bearing could need replacing.

You can unscrew the top of the jack to make it longer

I use "CAT EYE" tire pressure monitor on my duel rear wheels. You buy them for a specific pressure say 125lb and they keep both tires at the same pressure and have a single fill point. Available from many places online. About $75 a set, manual - no electronics. The last set of duels I got 85K with even wear.

Good job Yousif 👏 👍 👌

great video, i think about things like this and what to do in this situations and here you go showing me what to do 😂💪🏻💪🏻🤘

Good job. Two spares is the way to go. 👍🏻

My first time working with my nephew doing hotshot, we had a blow out. Good thing you changed your own tire. Saved yourself almost $300.

Impact tool help you very well specially for winter buena suerte 👍

Good job my brother, may Allah protect you always ❤️

need to through you a set of coveralls in the truck to put on when you are rolling around on the ground

I'm sorry man. I've seen a lot of your videos and very impressed. I would like to know more about how you start out? Thanks

You need to get yourself a cordless impact and some deep sockets for an impact it sure helps a lot

The first one, many more to come.

I was reading the comments some people have a good suggestion for you about the battery operated impact I have a dewalt high torque and it works great and the battery last a long time.

Protect yourself, your load, truck and trailer and just take next exit slowly

Scared me watching you changed your tire on the side of the highway. I am glad your are safe. Regards

Love the videos I’ve been pulling bobcats for 13 years if you’ll buy Carlisle tires only you won’t have blowouts I assume you have the ST 235 8016 tires the only one I have found that won’t blow out is Carlisle

Nice Job handling the situation. Left side tire on the highway not the safest situation. Triangles out, vest on , pulled way over the the right, good decision.

Based on the tire remnants I have seen along the road, You are doing better than many.

I bought a battery powered impact wrench. 1400 lbs of torque with 2 batteries and charger. I got tired of 4 ways and pull handles.

داس خووش كاكا بنجرجي..👷‍♂️👏👏👏👏

Good job Yousif! Mashallah! But "Safety first" next time! Do not scare us!

Back up jack !! Would be that case skid loader you have on your trailer lol

اللهم ارزق ذريتي الصحة والعافية والذكاء والنباهة وسرعة وقوة الحفظ والفهم🤲🏻❤️

I don't know if it was possible to drive to an exit and get off the highway. Changing tires on the highway is a significant risk. I'm glad everything worked out well.

Does the top of your bottle jack not unscrew to adjust the height? The part that makes contact with what you are jacking, the round checkerboard disk, should unscrew, if you cant do it by hand, try a pair of channel lock pliers because it might be stuck.

That’s sucks buddy be safe out there. When you get a chance you could switch to 14 ply tires or 16 ply tires buddy better performance.

check the axles on your Big Tex. another hotshot driver posted a video where his forward axle inside tires were wearing badly. replaced all tires, but then a few miles on the road, a tire blew out. he change the tire stated out again then the axle broke. make sure you have a tape measure. if that happens take the axle with you.

Bummer tire changes on the side of the freeway like that is very scary. I had to do my car tire awhile back with that chicken crap standard car Jack luckily I had a 4 way car lug nut someone gave me and didn't have to use that cheap a** jack handle wrench . Still at 68 years old and bad shape it was a real ordeal for me. Right when I was finishing a State Trooper pulled up be

Air jack and power tools is what you need sir.

I do not know why 7 person put dislike? The man offer and give u information about his driving and We will learn some skills if you not like do not bother him, do not watch his video,we are humans in different religion but we have the same goal ,,do good say nice words God will bless you,,only if you are not normal person ,,

I didn't think it would be the Ford end of that rig letting you down :).

Those bottle jack are made to screw the top so as not built up under them. A platform jack is much better.

Unscrew the top and it extends the length!

Just subbed man

I'd be calling service. That highway is some scary sh*t.

Glad you’re safe! Wonder why the hub is hot...

Buy special and good tires for heavy loads

Can you please make a video about how did you found a load

unscrew the top of your jack it will go higher

you know.. not even trucking related... you seem like a heck of a good guy... congrats...

I’m not sure but did you check to see if the top of your jack can be screwed out

Considering the weight on the trailer wasn't near maximum, why was that hub so warm? Was the hub or bearings getting ready to fail? Lack of lubrication?

It's just a flat, don't beat urself up over it. Yeah I did notice you hitting yourself with a tire iron. 🤪

HEY U NEED TO GET U A MILWAUKEE IMPACT AN SOME SOCKETS AN A NICE FLOOR JACK

You try to go by the car 2 feets bick up the Good tire up a wood after that change the another tire i use that trick ☑️👍🌹

i`m wondering about his weight ,or his air pressure them tires looks to good to fail

Also speed hurts them Chinese tires regardless of pressure

Hope you didn’t leave your tools on the trailer when you left the roadside.

Hey the bottle jack top unscrews for extended height you would have had enough jack had you screwed the top out. Just sayin

wheel bering is on verge of failing get a heat measuring gun to keep eye on bering

You need to get a Milwaukee cordless impact gun make it easy for your self.

How did you learn how to tie down your loads?

You need a cordless impact my friend !

You really need to check the air pressure on your tires at least once per day if not more. Tires are way to expensive for them not to be at the right air pressure which will end up causing more damage into other wear parts.

Are you using the tires that came with the trailer ?

Who is your factoring company?

I would never risk changing a tire on the side of the highway, its way too dangerous. I use to drive truck before and I know it and seen too many incident videos that happened on highway shoulders

You need to go buy you some Hercules 14 ply tires for that trailer I have the same trailer and once they started blowing out all of them kept blowing out after about five thousand miles every tire that was still on the trailer had bubbles inside them that weren't blown out Goodride tires are very poor quality

How much does it cost for the tire guy to come and fix it?

Have the same trailer had the same tires and can honestly say they are shit.... I just ended up getting 14ply tires

road side assistance?

You need to get a cap man! .look uniform

you have a copilot?

Check your tire pressure maybe you running to much pressure, be safe

Lucky your well off the road, always nerve wracking doing repairs on the side of the road, what size tires?

You’re still running the 10ply garbage tires that BigTex puts on their trailers. You need to put some 14ply all steel tires on. Synergy and Hercules make some good ones for a lower price. I’ve had my Synergy ones on for over a year and not one flat and good even wear.

Make sure you pay your helper

You know the top of the bottle jack extends if you twist the top of it?

Who's the other person in the video... ( at the back of the trailer)

Just one thing my friend why don't you have a 1/2 impact gun with you on the road my friend 🤔🤔🤔🤔

Please get an electric impact. It makes the job so much faster. The faster you get those lug nuts off and back on, the more drive time you have and you'll spend less time risking distracted drivers hitting you. Great video!

What was you doing before start your company Yousef

😩

Wow much risk, yo are putting your life on the line. Be careful.