I have several videos on KZfaq showing the finished product

Please share and subscribe

Thanks, I'm happy to help if you need it.

Thanks, it's very money saving and fun.

Thank you ! Join my face book group shot making fundamentals.

For 150lbs of lead add 1.5 lbs of tin and 5 lbs antimony

@@droberts6579 is that to pure lead, or range scrap at roughly 10-12 bhn? Thanks 👍🇺🇲

@@DummyRound that's pure lead and I assume most range lead is pretty soft unless some of it is hard cast.

Any time .

Since the shot is all inside of the shot cup I really don't see that it makes much difference.

But of course anyone that is making their own shot they most certainly can add graphite if they want..

@@droberts6579 I never saw how it would make a difference either, maybe I'll be able to tell a difference shooting trap after I buy a bag or two from you, if so I'll definitely let you know!

It would have to drop many feet to be hard enough to not deform when it touched down. Commercial shot towers are over 100 ft tall. I am perfectly happy with the roundness of my shot, it shoots as good as commercial shot.. I win as many matches as any one and more than most.

Monticello

@@droberts6579 I’m about 30 min from Lexington, so quite a ways from you

My number is 606 307 3186. Msg me, I'll send you pics and info

I sent you a message on the number you give me not sure if you got it. Does your coolent need to be warm or are you right to go

@@adrianphillips2552 I didn't get a text. My phone may have thought it was spam. Try again. 606 307 3186

Start with room temp with coolant. Water soluble oil mixed app 1.5 gallon oil to 3.5 gallons water.

No It sure won't.

eBay ships internationally now, so yes

#73 which is .024 thousands of an inch. I don't ship out of USA

Thank you very much for your reply would you please be able to help me with some measurements and drill size for 8s as well I have a 6inch hot plate

@@adrianphillips2552 you won't be able to run but about six drippers with a 6-inch hot plate.. the worst thing about using the hot plate is it's hard to get the front of the shot pot back close enough to the burner. It's just the way those things are manufacturer the burner is sitting in the middle of the framework.

Hello again sir are your holes drilled through the steel at the front of your machine or do you have drippers in there

@@adrianphillips2552 no drippers, I drill straight through the aluminum. Just make sure when you weld on the shot ramp you slow the correct distance for the shot to drop at least 3/8 of an inch , a little more for larger shot. I usually cut a small narrow strip of aluminum bout 3/16 thick by 1/4 wide and tig tack it to the bottom of the shot ramp to get the drop you need.

Water soluble oil type B. Machine cutting oil

I think you could buy factory shot cheaper, shipping would be high

# 6 and #7.5

Check out my videos, several show the finished shot.

Lool at the rest of my videos

I can occasionally get lucky with #5

Are you still making the shoemakers wisklh one could do larger shot for hunting coyotes

@@user-qk5uw5lj5w I'm still making them. I can drill .031 holes and you will be close too #5 shot but you got to run it slower to allow the shot more time to form larger.

www.ebay.com/itm/166373644687?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=pYTQoQd2Tk6&sssrc=4429486&ssuid=pYTQoQd2Tk6&var=&widget_ver=artemis&media=COPY

45 bucks

Number 5 is the largest I make

dannyanddonna