Many times I have found myself watching the videos you produce to help me get the job done. I really appreciate all you do. Thank you!

Hey Mike, just wanted to say thank you like everyone else. In the beginning of my learning adventure, your videos helped me out the most and made it seem doable. Eventually I got my business going (It took a lot of mentorship, studying and banging my head)... there were lots of trial & errors, but If I paid close enough attention and studied up on your videos, I found a lot of answers in your videos. Fast forward, i don't know everything - but business is doing just fine and sticking to my wheelhouse i have had a lot of happy customers. Want to thank you for helping me get going, even when you don't even realize it. Recently encountered a 19 Wrangler (Push to start flip prox w/ sip22 blade) and couldnt find the can hi or lo behind the glovebox, but gateway module was right behind OBD port so i went with 12+8 on that one. Customer was in a rush so I didnt spend much time, but i couldnt find the wiring pair behind the glovebox on that one.

Thank you for this video! It helped me a lot! I look forward to seeing more!

one of the better informative videos i ve seen great job

THANK YOU SO MUCH EVERY OTHER VIDEO SHOWED THE Y CABLE STYLE AND THIS IS THE ONLY VIDEO I FOUND TO USED THE CABLE I BOUGHT...

yu arethe best one so far in KZfaq, thanks a lot for your videos.

Thanks for the video, I used Lonsdor k518 it's very good too, it's taken me less than 10 minutes.

Great video! Lots of useful info and no bs.

Excellent video. Thanks!

Hello mate. Good to see you again.

Thanks you siempre de gran ayuda, good bless you bro.

Very nice explanation, blessings

Thank you very much brother. You are awesome

Great video mike saludos Ventura ca

Great video thanks!

Thank you very helpful

Thank you so much by the information

Aquí empezó mi carrera como cerrajero thank you

Nice job!

Nice video and thank you bro

Excelente video gracias por compartir

If I use the km100 do I need to plug in obd port on dodge or can I just plug the Vci into adapter

Good video, thanks

You are the Best!

Awesome video, helped me i was confused with the directions, Thanks Bro!

Buenos días muy bueno tu Vídeo y de mucha ayuda una pregunta cuando remplaza todo el conector de start dash c9 se tiene que programar algo para que encienda el carro ? Muchas gracias de ante mano

Thanks bro , youre the best!!

Thanks a lot... Appreciate your efforts. Keep up the good work.

The smart pro cable plugs in directly works great, also I did a 2020 Ram with im608 but you can’t use unlocked keys must be factory brand new

If I am using an XHorse Key Tool Max Plus with the 12+8 bypass cables, on a 2018 Ram Big Horn . To program a couple new key fobs. You got any videos or tutorials for that? I have looked online for locations on that black security box called FCA, to plug 🔌 the 12+8 bypass cables into. But numerous sites & videos show that the FCA black box could be anywhere from the left side to the right side to behind the radio to behind the dashboard. Is there a way to find out exactly where the FCA black box is without tearing the 2018 Ram 1500 Big Horn apart?

can someone please explain how to unplug the green plugs going into the obd star connector please

Im so glad i have witech..

Hi my friend best video I've seen with step by step instructions great job👏👏,My question is can I use a (used) key fob?

can this also be done with the chrysler 12 x 8 bypass cable thru gateway module

MUCHAS GRACIAS por esta importate informacion Pregunta .no tieness videos en Espanol

Hi, nice and very clear video... I have a quick question, though, i have 2021 ram 1500 classic, i found the star connect and tap the two wire you showed but cant get the pin. I think it 5 rolling pin for this model not 4.

Thanks this video saved me.

If the security alarm is armed / or going off can all keys lost still be preformed ?

How are you, great greeting, thanks for sharing, your videos are very cool.. You use the 12 + 8 cable.. Only two red and black cables are connected for programming, do not use the OBD2 port, thanks, this programming is can use the Autel im608

Great video, I've been able to successfully make remotes this way with my x100 pad 2. However we have this 2018 Chrysler 300 at our shop and when we opened the door the alarm was set and the customer lost the keys. Now due to the alarm being activated I can't get the pin code or communicate with the vehicle. Is there way to deactivate the alarm and use the x100 pad 2 or am I going to need another scan tool? Thank you

So when i use a adc 2011 cable do i unplug obd2 cuz yesterday it failed for 2023 caravan ... didnt have 2023 carvan in im508 options so i acted as if it was a pacifica same key also....?

Awesome 👍

Thanks a lot

I gotta connector from the junkyard so I could just plug it into the star connector thought that might help you out.

Everytime I use my Adc 2011 cable with my Autel im508 to do 2018 & up dodge charger or challenger r/t or scatpack it it tell me password reading not supported but when I do the 2018 2019 or 2020 dodge Ram 1500 trucks whick I’ve done many proximity keys for it always reads the password & programs the key successfully so is the rfh hub blocked on the higher performance Chrysler vehicles?

Does it work for autel im 608 ?? I'm working on 2021 ram promaster 2500 , thanks

What's you're thoughts on the $450. Autek programers? Also you're thoughts on the "new" Xhorse table plus?

I Believe I Remember You Had A Video On You Using The Autel 608 Pro With The Brute Force Bypass Cable& I Had To Suscribe Or Something.. When I Finally Got The Machine& Am Ready I Can't Find The Video.. Will 608 Pro Pair With Brute Force Cable?

Can you do a similar procedure using XHorse devices to make another key fob for a 2018 Dodge Ram 1500 ?

Hello has anyone been able to read the pin code of a ram 2500 2020? If so what system was used.

hola donde puedo comprar ese cable..?? gracias.

Hey quick question how did you get all the fancy manufacturer icons on your autopropad been wanting to know

Can you buy this brute force cable for the Autel im508 or im608? I have the 12+8 SGBC but I heard the brute force is easier

Hola amigo ese mismo cable adaptador se puede utilizar con im608 pro o cualquier scanner te pregunto por qué el im608 pro trae un adaptador pasaresido pero tiene 6 cable y no especifica cuál usar

could you use a 2011 cable instead?

HELLO, COULD YOU TELL ME WHICH KEY PROGRAMMER IS THAT YOU ARE USING AND WHAT DO YOU THINK OF THE XTOOL D8 PLEASE I KNOW VERY LITTLE ABOUT EITHER OF THESE TOOLS BUT I DEFINITELY HAVE THE NEED FOR ONLY ONE OF THEM THANK YOU?

Bumblebees and Christmas trees! Hence: Yellow and Black wiring....(Can Low) ...and Red and Green wiring...(Can High) match those colors up, and Ur Good!

Se puede ocupar autel con conector 12+8? Que diferencia tiene blutteforce con conector 12+8?

do you have to remove panels to get that green connector piece out??

I have the T-Ninja 1000 programmer, Will the star cable work with my machine or do they make one for it? Thanks

Mike what does the "Resync Available" part refer to right next to the notes in minute 9:00?

Para programar llaves perdidas, se conecta cable al puerro obd2 o se sigue haciendo desde el conector del Video?

احسنت

Buenas tardes compañero me podrás dar los colores de los cables a los q debo de conectar el cable rojo y negro q trae el adaptador

Sir I'm buying xtool 12+8 cable adapter...sir will it work with xhorse mini obd ?

To be clear, I can reflash the pcm with HPTUNERS??

Exelente explicación yo entiendo ingles puedo hablar pero. No escribir me fayo eso en la escuela 😅😅😅

So ANY dodge under 2018 doesnt need thoes bypass cables right? You can jus do it through the OBD port correct?

The reason for connecting your key programmer to the star connector and not to the OBDII connector is because of the gateway module, isn't it? Thank you

Do a 2021 Dodge Charger

I’m trying get a new key program but the locksmith say he can’t read the 4 digit code how he suppose to do it ?

Hola amigo Donde puedo comprar ese cable ?? Gracias!!

Are there Tokens or a subscription for the Xhorse?

Do you know where’s the one for the ram 1500 2020? Thanks

Amigo sabes si un 2004 Lexus IS 300 trae el codigo de la llave en el cilindro de la puerta

Would that bypass work with a km100?

Can u reprogram the same keys that came with your car cause some1 tried to take my car and my fob does not work

And please how can I get the brute force power connector please

Como sabes donde se encuentra la cajita verde

Hi The full version of Autopropad can do the 2020 ram new style key or not?

Hola Que programador uso para nissan 20pin code

Will this work with the km100

Please bro how can I do some two pin red and black

ESO es alo que le llaman colgarse de la red can?

Just want to confirm, only 2018+ and newer required a cable correct? 2017 Dodge Ram doesn't need one?

Why you don t use a câble 16+32 ?

Hy miky I've tried this cable with my IM508 and the other cabl ADC but never worked for me? I've to keep using the 12+8 cable. Any other salutation or back probe?

Dodge neon 2018 Where can I get its port

Great video but this is a 300 probably 2012 ... not even a 2018 ram 😂 im confused

AutoAuth is $50 a year. Just a thought.

This is how they're taking hellcats

Is that the only cable required

whre can i buy this tool?

Hi Is this auto propad basic ?

Is this auto basic propad ?

Hi sir, where can I contact you please?

Someone tried to steal a car from a dealer exactly like this

Se piede leer el pin con upa

Muy buen video bro pero que le paso al spanish😢

Automatic identify never works for me