Forging a KATANA/WAKIZASHI inspired sword from a File the complete project

Рет қаралды 57,313

2 жыл бұрын

Hello everyone and welcome to the forge, in this episode you can watch the entire Wakizashi forged from a Nicholson file from beginning to end. I learned a lot from this build that will help me immensely on Katana/Wakizashi builds in the future as well as knife making in general. As always I appreciate you watching and if you would hit that SUBSCRIBE button and ring the NOTIFICATION bell to be informed when my newest content posts.
If you like Blacksmithing related projects or are looking for a great entry level project to help you make money blacksmithing head over to www.blacksmithingblanks.com and check out their huge selection of pre formed hooks, utensils, handles and tools. Use coupon code MATT at checkout to save 10% on your purchase.
Reveal Music from www.epidemicsound.com
#ytsamuraichallenge

Пікірлер: 58

@jessereid8482 Жыл бұрын

love this. i really appreciate the use of a hamon. hate it when people just quench it normally and call it a katana. a hamon is a huge part of the katana. good job my friend.

@Mysticmountainforge Жыл бұрын

Thank you! I appreciate you checking it out!

@chewyakarieckenicholas6049 Жыл бұрын

Absolutely beautiful and I have to say that I truly feel that a real wakazoshi is in how much of yourself that you put into the blade so don't worry about the naysayers that can't stop criticizing people

@B-leafer 11 ай бұрын

Glad you came to the realization you could have left the tang on it and "upset" it forming to what you needed. Meanwhile, adapt and overcome!

@stephenjohnson6841 Жыл бұрын

Might not be the purist method of forging but it turned out amazing! You even get the family involved! Huge 👍 Thanks for sharing!

@Mysticmountainforge Жыл бұрын

Glad you enjoyed it! I appreciate you checking it out, my wife always comes to the rescue when it comes to wrapping the handles.

@MrCeez1 Жыл бұрын

Great job Sir. thank you for sharing. I was able to kick back eat my breakfast and watch your video.

@Mysticmountainforge Жыл бұрын

Thats Awesome, I appreciate you checking it out!

@corywinning6655 4 ай бұрын

i learned ALOT! just wonderful watching thankyou

@Mysticmountainforge 4 ай бұрын

Awesome! I appreciate you watching!

@adamdiaz8442 7 ай бұрын

Stunning work sir

@Mysticmountainforge 6 ай бұрын

Thanks! I appreciate you watching!

@adamdiaz8442 2 жыл бұрын

Love this man’s work it’s real inspirational

@Mysticmountainforge 2 жыл бұрын

Thanks! I appreciate you watching!

@TheSchmed Жыл бұрын

That steel is probably higher quality than most ancient tamahagani, as most modern steel is. Should do a measure before and after on the curve pre/post quench.

@vladimirkovacevic1656 Жыл бұрын

beautiful wakizashi

@Mysticmountainforge Жыл бұрын

Thank you! I appreciate you watching!

@Hisdudeness799 2 жыл бұрын

Beautiful piece, bravo sir.

@leoruotsalainen6339 Жыл бұрын

Great hand work 👍👍Great video 👍👍

@Mysticmountainforge Жыл бұрын

Thanks! I appreciate you watching!

@rockers2rockers616 Жыл бұрын

I bet it will cut and draw blood just like a 'real' Japanese Katana. It sure looks nice. Great content.

@Mysticmountainforge Жыл бұрын

Thanks! I appreciate you watching!

@unknowtips Жыл бұрын

Great

@leatherface711 5 ай бұрын

what a great build good job

@Mysticmountainforge 5 ай бұрын

Thanks! I appreciate you checking it out.

@leatherface711 5 ай бұрын

So I have found with that type of furnace cement it bubbles really badly even after it’s dried I have found if you mix it down with charcoal ash there is a lot less bubbling and you still can get a wonderful hamon

@Mysticmountainforge 5 ай бұрын

I will have to use that method in the future, I appreciate the tip and I appreciate you watching!

@mrkiky Жыл бұрын

Tuned out great! I just wished you'd cut something with it on camera 😪

@Mysticmountainforge Жыл бұрын

Thanks! I actually plan on doing a cutting video with it soon. I appreciate you watching!

@oneshotme 2 жыл бұрын

Looks great and an excellent job making it!!! What no stingray?? LOL Joking but it does look beautiful!! Enjoyed your video and I gave it a Thumbs Up

@eliot6989 10 ай бұрын

I think it was better to chop the tail off. I didn't like making my koidatsu with a smaller tang at all, a flat wide tang is much preferable for blades made to be taken apart

@TheGreenWelty 6 ай бұрын

I'm not all the way through the video yet but the tang that you have on there is very traditional just set two menuki pegs in there and it'll be strong enough for battle use even if you have twice that length in handle as long as you're using a hardwood it's well fit and dual pegged

@Mysticmountainforge 6 ай бұрын

I ended up lengthening the tang by a few inches in the video, but noticed after doing more research afterwards that the length would have been fine with the construction your talking about. I do appreciate your advice, and I appreciate you watching.

@dsanchez9703 2 жыл бұрын

Bro dats cool

@Mysticmountainforge 2 жыл бұрын

Thanks! I appreciate you watching!

@MADROCKS221 2 жыл бұрын

Beautiful work - was that real ray skin ? I like the way you had extra hands to do the Ito wrap.

@Mysticmountainforge 2 жыл бұрын

Thanks! I used textured leather to simulate the ray skin due to the prices of the real thing being ridiculously high currently. The knife wife comes in clutch when it comes to wrapping the handles, I had a hand injury awhile back that makes it almost impossible for me to do.

@bluudat1site Жыл бұрын

hey whats that neat tool youre using to find the center of your edge

@Mysticmountainforge Жыл бұрын

It is called a height gauge, you can find them on Amazon or here www.grizzly.com/products/igaging-0-6-digital-fractional-height-gauge/t21576 I appreciate you watching!

@BubuH-cq6km 2 жыл бұрын

😎 👍🏼

@user-yb1er8qg1y 8 ай бұрын

❤❤❤

@SchysCraftCo. 2 жыл бұрын

👍🏻

@liamr6672 3 ай бұрын

The blade seems to have a kink in it instead of a nice gradual bend.

@Hippucytees Жыл бұрын

This is a great video!! Just, that, 23.06, sounds like someone's having a real good time... 😳 .... Do you share a garage?

@Mysticmountainforge Жыл бұрын

Lol thank, I listened to the video over at that point and all I heard was a drill working fast forwarded, lol.

@Hippucytees Жыл бұрын

@@Mysticmountainforge Hmm, ok, but from 23.06 onwards, it sounds like something else to me lmao .....😳😳

@Mysticmountainforge Жыл бұрын

I don't share a garage so it must be ghosts lol!

@Hippucytees Жыл бұрын

@@Mysticmountainforge 😳. Woah.... Ghosts get up to a whole lot more than I thought.... 😳 .... lol.. But seriously, your work is good 👍. I'm just starting out and getting ideas, from people like yourself. Thankyou for this...

@alic2652 2 жыл бұрын

Test?

@Enigma-Sapiens 2 жыл бұрын

Instead of ruining any belt grinding on a hardened file, why don't you just take the temper out of it first?

@Mysticmountainforge 2 жыл бұрын

I normally do that, I usually put it in clay based cat litter to anneal after bringing it up to forging temp so it cools down slowly.I got sidetracked this time around.

@Enigma-Sapiens 2 жыл бұрын

@@Mysticmountainforge, Ahh, ok, thanks for answering. I thought maybe you had a particular reason for doing it that way and wondered what it might be.

@kevinwilson2442 Жыл бұрын

The tip geometry is driving me batty!! Keeps rounding over...😭

@Mysticmountainforge Жыл бұрын

I had the same trouble when I did my first Wakizashi build, I ended up getting a chair and sitting right down close to the lower contact wheel and just working it nice and slow, and even then still had some rounding on it.