NA + TURBO Falcon Hits The Track (Saves The Best For Last)

NA + TURBO Falcon Hits The Track (Saves The Best For Last) | TURBO Your NA Barra Pt 10

Рет қаралды 20,176

Күн бұрын

Time to take the NA + Turbo converted Barra back down the quarter mile to see just how much time we can drop with the new power.
We smashed our previous best times but it wasn’t without some drama.
Hope you enjoy, if you did and would like to support our little battler channel grow please consider liking, sharing with a mate and subscribe to keep up to date as videos come out!
| MERCH | Check out our merch store for well priced, quality gear - browneysgarage.deco-threads.co...
| ART DESIGN | MUNROE - / munroes_workshop
| CONTACTS |
FACEBOOK - / browneysgarage
INSTAGRAM - / browneysgarage
EMAIL - BrowneysGarage@gmail.com
NOTE: As always be careful when completing any work on your car, and if you have any doubts refer to a workshop manual or experts - we are not experts!
With some Music by Bensound.com
00:00 - Coming Up
01:15 - Intro
02:14 - Previous Best & What's Changed
03:06 - Surprising Results on the First Pass
05:26 - Second Pass
07:29 - Talking 60 Foot Issues
08:36 - Third Pass
09:18 - Patriotic Burnout & Fourth Pass
09:48 - Choking Under Pressure!
10:57 - Redemption Pass… Then Car Shuts Off!?
13:36 - But What Was the Time!?
14:12 - Discussing Results
15:36 - Giveaway Winner
15:53 - Is the car Broken?
16:24 - Next Up & Outro

Пікірлер: 160

@BrowneysGarage 2 жыл бұрын

So, do we go back and have one last crack at a 13? OR do we do some upgrades before heading back? Still seems a driver mod would bring time down a bit, and that only comes with experience. Either way what a great day this was!

@independentassesor2630 2 жыл бұрын

Definately do more upgrades. Valvesprings Injectors Boost Aim for at least 350 rwkw which is easily achieved. Up the Transmission line pressure, use quality silicon joiners were needed as there notorious for sucking in.

@scroatworx2339 2 жыл бұрын

barras have a torque limit function to "save the gearbox"

@independentassesor2630 Жыл бұрын

@@scroatworx2339 I absolutely hated that function. I ended up having to eliminate it when tuning mine because it kept interfering. It caused surging for some reason. I was lucky my box didn't blow but I did have some work done to it

@shadquirk607 2 жыл бұрын

Stoked for you mate! 14.01 is nothing to sneeze at, the overall improvements are well worth it no doubt. You should be pretty proud, so enough of the self denigrating. Putting your work on the line like that is rare in this sphere, where no one is willing to put their money where their mouth is so to speak. Keen to see what's next.

@BrowneysGarage 2 жыл бұрын

Thanks mate, unfortunately I'll always be one of my biggest critics. It's a double edged sword though and also makes me learn and improve as I go I think. I am proud of what we've done though, never thought we'd turbo this car when I first got it! Thanks again for the support and kind words, hope you enjoy everything we have coming, including more for this car coming now I'm sure.

@brockmacckie9905 2 жыл бұрын

I agree its a good improvement and also a good starting point its un open n/a so can get plenty more out of it when ur ready look at turbo tax it started off in simlier times and trying to go for 10s on lpg

@TimewastiusMaximus 2 жыл бұрын

10:19 GOLD hahaha

@fullboost Жыл бұрын

Keep up the good work on the videos mate, nice viewing.

@BrowneysGarage Жыл бұрын

Wow thanks very much mate, huge praise from a channel whose been doing it so well for so long! Cheers

@bengibson3955 2 жыл бұрын

Hey Browney. I love your vids mate. I’ve got several unfinished projects that would not even get down a 1/4 mile so you’re way ahead of me buddy. Look at it this way-your 1/4 mile time is faster than a phase 3 GTHO. Go you good thing!

@russellwaynemcquoid9104 3 күн бұрын

Great ta get these Hak upgrades

@Doc_in_the_carpet_truck 2 жыл бұрын

Oh Shit I Won !!!!!!!🍻👍🤣 What a pisser!!!!!! Top video Browney spewing you didn't get the 13 maybe the manual slap sport shift maybe will be the difference?? Felt cool in the gas only BF sales rep special I had to thrash around in back in the day!! Maybe a sticker for the esky too........🍻😜

@BrowneysGarage 2 жыл бұрын

Yep all Daniels won! 🤣 Maybe, something to play with one day maybe - could also be something for me to stuff though haha

@Doc_in_the_carpet_truck 2 жыл бұрын

@@BrowneysGarage Bugger so wrong Daniel then??

@samthestoryman3757 2 жыл бұрын

Mate so close!! You did awesome and so did the car! I worried it wouldn’t be close because your trans was so sluggish with the extractors but it did wicked. You have shown people the difference of turbo vs extractors at the cheapest for both and I’m shocked that there’s such a difference, thank you!. 1.5 seconds gains is great especially considering stock fuel injectors and stock n/a valve springs. And then there’s the fact some people just aren’t great at drag racing lol I’m not! I did my valve springs and got my ba xr6 turbo tuned to 230rwkw and the best I got was 14.05 lol so basically a good untuned time! I bet there’s 100s of people that think their car should do a certain time because it’s upgraded and never manage it, then you never hear about it because they are to embarrassed. It’s been great man, I’m excited to see the new plans for the car

@BrowneysGarage 2 жыл бұрын

I honestly thought the same too and I think it shows at the start of the day. Thank you, that's exactly the idea. We've now shown how to get to be turbo'd, once you have that much of how fast you want to go is just $$$ now... and driver as you say! Cars are so different though, and that peak power only tells so much of the story. You're right though, there's a bit to getting every last bit out of a car. Maybe we just have too much mechanical sympathy, not the worst thing in the world! But I think a good part of it too is just doing it and learning, and hopefully that's part of what I'm doing and sharing. No shame, have fun!

@C_055IE 2 жыл бұрын

Again well done mate, still can’t believe I was 3thousands off.. Great to see your videos, keen to see you back out there and crack that 13s pass

@BrowneysGarage 2 жыл бұрын

Killed it mate, I'll shoot you a message if I ever need a DYO class time for the cars! Hope you enjoy your hoodie 👍

@stephen4185 2 жыл бұрын

Great to see mrs browny on the camera

@michaelsaba7765 2 жыл бұрын

Love your work Browney, really enjoying following this build - full credit to you, you should be proud. 👍

@johnconroy9555 2 жыл бұрын

Loved it Browney sooooo close you partied hard matey shows what homemade can do 👍👍😎😎...john..Willaura vic..

@BrowneysGarage 2 жыл бұрын

Thanks John, we nearly had it! Was an amazing day though.

@s4ss.m8 2 жыл бұрын

Could always go get some gas rods from a gas motor mate, my Falcon has that, Crow Cam Valve springs, Atomic pump gears and backing plate, ARP head+main studs and an FG intake manifold, full exhaust, so it has Pacemaker 4490s, 100cell high flow 3" inch cat section, a 3" inch section from the cat, to the diff, then 2.5" over the diff and into a 2" to 4" inch cannon, sounds mint, only has a small muffler at the diff in the middle, rear muffler is technically deleted, fitted the Mace CAI to it before it got tuned, made 190kw to the wheels and has room for more but my gearbox isn't happy with life 🤣 Edit; all of that was done by myself in my garage mate, if I can do it, you for sure can, managed to score all this for under 2k as well, hunting Ebay and FB market place, even a wreckers, I haven't been able to get up to Heathcote to run her but she feels low 14s

@HitchBmx 2 жыл бұрын

Onya Browney!

@RossHollandAU 2 жыл бұрын

Wel done Browney! Right around the time i got! 1st gears a killer... go the high stall if your up for it! The 2500 took .5 off my 0-100. Would of gone well into the 13s of I had the chance to take it back 🤣 great work mate!

@BrowneysGarage 2 жыл бұрын

Thanks Ross, I'm definitely leaning that way at this stage. Somewhere between 2500-3000 would see it much happier off the line and should still be much the same to drive on the street I'd say? At least with some discipline/throttle control 🤣

@RossHollandAU 2 жыл бұрын

@@BrowneysGarage I barely noticed the 2500 for daily driving. Only really notice it when you load it up and giving it some 👌

@BrowneysGarage 2 жыл бұрын

Perfect, good to know. Not like it’s a daily anyway, just got to work up to doing the work under the car again - or a shed big/tall enough for a lift!

@mex351 2 жыл бұрын

@@BrowneysGarage A convertor swap will deff help you but a gear change will go even further again. 2800 and a 3.45 or 3.7 will still keep it as per normal for daily driving but drop like maybe 1 sec or so off your ET's. Plus around town it will use less fuel. Good work so far,good to see.

@leebishop6665 2 жыл бұрын

Good job mate unreal. Time to do my NA turbo. 👍

@BrowneysGarage 2 жыл бұрын

It’s worth the work mate, good luck 👍

@SHOCKcustoms 2 жыл бұрын

Bloody well done brown man. Love ya work. E85 will be your friend going forward

@94toxic94 2 жыл бұрын

Great effort brownie! Loving the content mate

@justkyddingracing9268 2 жыл бұрын

brilliant Brownie, 1.5 seconds may not sound like alot to some but i know that seat of the pants is what counts and that is a huge difference. worth it ? hell yes it was im calling it a 13.99 and that is a quick car. original runs in my 300rwkw Ba turbo were 13.6 and it took me a few meets to get a handle on boosting off the line with originally similar 2.4 60 foot. now 2.0 and 12.4 @115 mph. love ya work mate inspires people like myself for more backyard hackery

@leroybrown6946 2 жыл бұрын

Well done Browney, Top work

@diggerau698 2 жыл бұрын

Well done mate, always look forward to seeing ur content keep up the good work.

@joeysykes566 2 жыл бұрын

Great stuff my friend

@viperzz_101 2 жыл бұрын

yea good on ya browney love ya work mate

@jedw7499 2 жыл бұрын

I believe there is a torque reduction setting for the trans that needs to be turned off. My 400hp ba was the same never liked to be stalled up. Look at the nugget garage video on 13s for $1300 they find and fix the problem on that

@FuelBurnMedia 2 жыл бұрын

Really happy for you mate! Next time you’re at Heathcote I must must stop by with the NA Barra swap XD wagon and have a yarn, (I’m based in Bendigo). And congrats again on 15k! Extremely well deserved! 💪💪

@Samuelpizzuto 2 жыл бұрын

Congratulations on 15k subs mate! Love the series so far

@georgehatzi6625 2 жыл бұрын

Great work good to see your having fun.... Keep up the good work. Yes take the green machine out again to Heathcote.

@toddk8232 2 жыл бұрын

Great vid

@mr33spitnbarz28 2 жыл бұрын

Unlucky bro… Keep doing what you do.. you’ll get it

@matthewoutram1228 2 жыл бұрын

Well done mate you should be very happy and can't wait see what U do next deffo think maybe chase abit more power then go back

@abccba3903 2 жыл бұрын

Good work, and your lucky to have Mrs Browney.

@BrowneysGarage 2 жыл бұрын

Very much so, if you find someone who supports and encourages you you hold on to them 👍. Thanks mate

@conservativesniperhunter7439 2 жыл бұрын

Great stuff Browney. You came very close to the time you were aiming for mate. It’s good enough. Now just drive it and enjoy the mods you put together and maintain it so that it’s a trusty reliable steed that gets you wherever you want go and back home safely.

@BrowneysGarage 2 жыл бұрын

Thanks mate. That's the plan for now, enjoy it at this stage for a bit. Fingers crossed we can do that but I've already started looking at a small issue today, unrelated to the conversion, that may need sorting and explain a few tiny issues we've had - never bloody ends! 🤣

@donaldhalls2189 2 жыл бұрын

Definitely go back and try again, if you can get it all coordinated I reckon you'll get your time, it would be great to know how much it set you back, good runs, bit more practice never have to much practice 🤣😂 almost as much fun as a real pull, thanks for filming it, all the best to yous and your loved ones

@BigRigWA Жыл бұрын

Love what ya do mate. Great vids!

@BrowneysGarage Жыл бұрын

Legend! Thanks very much mate.

@bearcatracing007 2 жыл бұрын

Oh man that was a lunch time turd away from getting into the 13's. Well done, this has been great build to watch. Really enjoy the channel and congratulations on the 15k.

@BrowneysGarage 2 жыл бұрын

Or maybe even if I hadn't had that hotdog and chips for lunch! 🤣 Ah well. Thanks mate

@dazzamac70 2 жыл бұрын

Well done mate, what an awesome result for a 'Budget Build'!!! Maybe a manual conversion would see you with better 60ft times alleviating that tall 1st gear in the BTR or maybe you're just happy with a cruiser with those awesome turbo noises??👌😎

@oxXEdwardsXxo 2 жыл бұрын

I think that four speed is letting you down and maybe a higher stall converter. Awesome to still see you go and have fun. Keen to see what happens in future

@HotdotA1 Жыл бұрын

14s not bad! Well done on having a crack. 👍

@ad351 2 жыл бұрын

Well done mate,that was an awesome result 👍🏼

@BrowneysGarage 2 жыл бұрын

Thanks mate, not bad for what it is 👍

@loganperry8637 2 жыл бұрын

So sick! Congrats on 15k subscribers man

@loganperry8637 2 жыл бұрын

DIY ZF swap?!?!

@KaidenOZ 2 жыл бұрын

Morning brownie, been waiting for this one...also i think your main issue, at least in track running is lack of a trans brake... can't get the revs up enough to build boost without losing traction.

@BrowneysGarage 2 жыл бұрын

Hey Kaiden. Revs are as far up as they'll go without a higher stall converter and no tyre spin loading it up in the right conditions. Trans brake would be sweet though and will be a benefit in future no doubt, keeping an eye on one being developed right now!

@change_your_oil_regularly4287 2 жыл бұрын

@@BrowneysGarage yeah need a 2500rpm+ stall converter not a trans brake. The brakes should work fine "stalling" at this power level

@JP-ry9ob 2 жыл бұрын

Or you can get PCM tune with launch control

@johnmorris1764 2 жыл бұрын

A lower ratio diff will get your 60 ft times down, I suspect your oil temp might have caused the shut down maybe time for an oil cooler. Love your work mate.

@MeatballGarage 2 жыл бұрын

Mate - Well done!! Although you didn't get that 13, its still a great time first time out with the new set up and most importantly you and Mrs Browney had a ball & you drove it home in one piece! Reckon those tall diff gears and stock stall are holding this back a little bit too - and as a few have said already maybe the fuel delivery needs a boost to keep those AFRs in check. Wont be long till this does 13s all day! Reckon this has the measure of my XW, fired it up the other day - oofft she was not a happy Clevo! This has been a great series - can't wait to see how it progresses! Cheers - Marc!

@BrowneysGarage 2 жыл бұрын

You're right, was a great day out anyway and those diff gears/stock stall hurt the times. Car was great for driving to the pub after and then home though! Wish I'd had an eye on those AFR's on the day, live and learn. First 3 runs were around 13:1's, next 3 (what I had of last run included) were much better at around high 11's - good but bloody frustrating when things aren't consistent. Early stages of a fix for this but looks to have been something really small and out of my control largely... fingers crossed! But the XW would sound and look soooo good doing it! Hopefully the weather improves and you'll have more excuses to get it out for a good run soon. And thanks for watching mate 👍

@wil3080 2 жыл бұрын

Good work mate even throw a few litres of e85 in your tank lowers the knock

@quincyoconnor9707 2 жыл бұрын

Correct if wrong. Tuners pull timing in mid range on those na barras as a rod saving precaution. That fat mid is where they bend rods.

@Lizards_Lounge 2 жыл бұрын

You hit 15k because you do good sharing of info and clear commentary. AND because of that falcon first gear. So many of us own one. ..and find this gear an issue..great engine..but box makes car feel so slow under 70 or so.. So we wonder "how can I unlock some of the potential"..and we found you. I personally find sliding it to the left and changing gear myself to give me better throttle response these days, even on highway . Caus it's overall helping with fuel consumption..a tiny bit.. And being in the city all the hatchbacks tailgate me off the mark at the lights... The control of the gears tends to a little less doughy (it seems) for me. But Ive rarely given it everything although to give her occasional upping..rarely give it ALL.(she's nearly over 400 000 now, and alot of stuff needing to be replaced soon.) So maybe under drag circumstances the shifting makes no difference to 'D' mode. That's right about what you wanted, so I see this as hitting the goal..that's a TINY margin off the 13 bracket..not exactly a joke of a slow car and alot quicker than she was with fully stock everything. Thank you again for the information and entertainment. All the best Brownie + congrats.

@jimclarke1108 2 жыл бұрын

15,001 subscribers now😁

@DADZGARAGE 2 жыл бұрын

Great video mate. You will get 13s soon i am sure.

@brockmacckie9905 2 жыл бұрын

I don't see any failing awsome job and also got close to the time u wanted and best bit u drove home up the migthy b series

@BrowneysGarage 2 жыл бұрын

Thanks Brock, that last part is important - it meant we could stop at the pub for dinner on the way home 🤣

@brockmacckie9905 2 жыл бұрын

@@BrowneysGarage b series cruise and turbo sounds pub feed and good day out with misses can't think of anything better i think im enjoying this build as much as you and i only get to watch it through my phone lol

@jtsn667 2 жыл бұрын

Well done, sooo close! I think go in for a retune then take it out again because if say again it pulls a flat 14 youl just be annoyed Iron out the bugs, retune and take it down the strip Keen to see the next video

@glensgraphix 2 жыл бұрын

I've been looking forward to this episode! You may not have got your target time but you did improve a lot for the amount of money and time put in. You clearly enjoyed yourself. So you have to call that a win! You so damn close to that time though. That has to be a great feeling. I'm looking forward to what you have planned for this car now. I was only wondering the other day what are you going to do. Don't worry, I don't think about you that often that I need help, yet. If I get a tattoo then I'll need some professional help! Until then I'll settle for getting some merch :D Bring on the next episode!

@BrowneysGarage 2 жыл бұрын

Yep I made the rules/goals, so I can change them and call it a win right? I think so. Batting a few plans around in my head for the next stage already, high stall, more power, tidy the bay up a bit etc. Not set on anything just yet and it starts to get to danger territory for a few components so hoping to enjoy it as is for a little and share it around so a few others can experience what we've done too. Plus, itching to get the EB/ED project going now! Glad to hear you thinking of me... I think! Maybe hold off on the tattoo, I can't promise I won't find a way for you to regret it and need some sort of dodgy cover up!

@marktaylor1498 2 жыл бұрын

Very good attempt 👏 I was hopeful of a 13.90 A transmission tourqe remap would be a good try to lower et

@cvytnioy56dvfuj4g7 Жыл бұрын

Fuel tank under 1/2 Valve springs should handle about 15psi if you have a decent exhaust, on a stock exhaust system they don't like much over 10. Increase the trans line pressure will firm the shift and help. My stock 04 auto turbo ran a 13.99 @ 101mph With 257rwkw it ran 12.97@108mph To go faster than that it needed decent rubber and more power. With 370rwkw on drag radials it ran 11.95@120mph

@Chris-oq7zx Жыл бұрын

goo job

@spiritlevelstudios 2 жыл бұрын

Good work. My wagon stalled once on decel, only time in 2 years of driving, no idea why. Started up again just fine.

@BrowneysGarage 2 жыл бұрын

Interesting. I'm playing it as mindful but not concerned for now, she'll be right!

@Andyc351 2 жыл бұрын

Your doing better than me. Turbo kit finally fitted, tuned and trans lasted approx 50KM before hating life.🤦‍♂

@BrowneysGarage 2 жыл бұрын

Oof sorry to hear mate. Hope mine can hand in a bit longer yet!

@Andyc351 2 жыл бұрын

@@BrowneysGarage zf6 is not cheap to fix but oh well

@zwalk1430 2 жыл бұрын

Good on you brownie it was a blast seeing you there!!- Fairmont kid lol

@BrowneysGarage 2 жыл бұрын

Fairmont kid 🤣 - sorry I'm a jerk and never got your name, was hoping you'd pop up in here. Great to have a chat and see the Fairmont out there. What did your best run for the day end up being?

@BrowneysGarage 2 жыл бұрын

Oh and have just uploaded an unedited run that Mrs Browney got for you. Is unlisted so can only see it if you have the link. Might not even interest you but it was there, I'll leave it up for a bit then take it down just to keep things tidy on this end. Feel free to rip it from KZfaq or do with it whatever you like! kzfaq.info/get/bejne/qZ6Xotmjnc6teZc.html

@zwalk1430 2 жыл бұрын

@@BrowneysGarage thanks a lot mate really appreciate that you’re a top bloke don’t worry about it haha, it ran 14.7 just 2.5 catback. Sad you can’t hear the v8 cause of that Barra xd, should have pulled the pipes off from extractors! Thanks again though I’ll definitely save the vid for sure 👍

@zwalk1430 2 жыл бұрын

@@BrowneysGarage oh and the name is Zack hahaha

@BrowneysGarage 2 жыл бұрын

@Z Walk Haha thanks mate. Damn good time for what it is, got to be happy with that. And yep definitely should have, not just you though I don't think I heard my car once all day! Good luck with it mate and hopefully catch you again some time 👍

@craigfiles7067 2 жыл бұрын

So close. If you haven't got a scanner I recommend the OBD2 Australia scanners I use the obd2-usb scanner it connects to a laptop and gives more scanning options than there Bluetooth scanner .

@BrowneysGarage 2 жыл бұрын

Got an Autel scanner there. Have now had a 2 second look and no stored codes, will go through it more thoroughly one day. Thanks mate 👍

@Mr-Broccoli 2 жыл бұрын

Ah so close Browney!! She's for sure got 13s in her as is! You should be stoked with how far you've come with the car and the channel! Congrats on 15k! But c'mon, lets be honest here, yes you could could relocate the battery for a turbo side intake, yes you could get a bigger intercooler and get rid of that bottleneck heat soaking cross over, yeah you could throw oil pump gears, head studs and valve springs in her with a boost controller. But at the end of the day a manual conversion is the only logical option here to drop heaps of time Its super easy ;) ;)

@BrowneysGarage 2 жыл бұрын

Thanks mate, very happy and proud of what we've done so far. ... I could also do a manual conversion and have the nut behind the wheel add time back on though! 😂 Honestly think the BTR is here to stay now, even with some beefing up at some stage maybe. Makes me a lot less concerned to put someone else behind the wheel for a go that way and I'd like to do a bit of that now, let a few mates/family share it. So yeah, a lot of the 'could do's' you listed may come in the future!

@victorpeirce4753 2 жыл бұрын

*Mr Broccoli 🥦...a ZF 6 Speed auto in Brownies green machine and she would be running 13.O all day long. The only other option would be to run 4.11s diff gears which suit the BTR 4 Speed auto so much better and still only revs at about 26OOrpm at 110kms. Higher revs doesn't always mean you use more fuel.*

@robbieaussievic 2 жыл бұрын

...... Well done Mate, I was wondering what the programmed conditions were for engine light AND shut down. I don't believe there is a engine shut down condition at all, (too dangerous, e.g. intersection). I think the cause of the 'Check engine light' corresponded to the stall. Computer diagnostics from mid-2000's (first AU OBD2 don't forget) were not that sophisticated I assume. Still, be interesting to see a list of 'Check engine' fault conditions. I hate not knowing. These things don't fix themselves.

@towking_ 2 жыл бұрын

Awesome video, I reckon if you undo airbox from intake pipe for a run, (bypass air filter) you'll crack the 13seconds.

@BrowneysGarage 2 жыл бұрын

I reckon if I hadn't of had the hotdog and chips at lunch I would have got there! 🤣 That could do it too though.

@finnsillibourne9772 2 жыл бұрын

Might be worth investing in a cheap code reader, that check engine light should be stored in logged codes! Great video brownie

@BrowneysGarage 2 жыл бұрын

Finn thank you - why didn't I think of that sooner!? 2 second scan showed no stored codes so good sign at least, will dig through modules another day. Check engine light may have only come on once engine stalled and I was coasting, as it would normally with key in on position and engine off, so it may remain a mystery for now.

@jeepnutscotty 2 жыл бұрын

Use the hand brake rather than the foot brake on the line… then use it as a faux trans-brake on the last amber light… used to work wonders for me for the 0-60ft

@peabow1031 2 жыл бұрын

My ford does the same thing when I get a bit spirited with it sometimes not all the time but still don't know why it does it nothing wrong with it just rest it with the key and start it like normal.

@tickford2 2 жыл бұрын

Hay mate well done with the build , with your car cutting out it could be the Throttle positioning sensor only because i had the same thing happen to me, started off every now and then and got more more frequent hope this helps with your problem as it may give you a place to look…

@BrowneysGarage 2 жыл бұрын

Thanks very much for sharing mate. Definitely gives me something to keep an eye on or check, not too worried just yet.

@CRFLAus 2 жыл бұрын

Pretty stiff head wind by the look of the flag Browney. Headwind is a bitch! Thanks for the videos!

@change_your_oil_regularly4287 2 жыл бұрын

Nice work mate 👍 fark the naysayers

@BrowneysGarage 2 жыл бұрын

Always 👍

@akaitv6606 2 жыл бұрын

I'd like to see live data regarding timing throughout the run , also the gearing is doing you no favours , I really believe it's capable of a 13.3 at 108

@ejfranklin9746 Жыл бұрын

Keen find out the cost the build keep up the good work

@BrowneysGarage Жыл бұрын

Thanks mate, I got you - kzfaq.info/get/bejne/Zrijaqt1rZa7mqc.html

@akaitv6606 2 жыл бұрын

Go 3.73 or 4.11 maybe a 3000 stall

@haydenriley5933 Жыл бұрын

Hey browney, did you have to upgrade your valve springs when you did this conversion?

@A_lesson_in_Hate 2 жыл бұрын

Put a 12psi spring in it and a retune ,it will be right

@markdrewett149 2 жыл бұрын

Pull some weight out starting with the spare if traction is no problem. Also remove the front sway bar. Both easy jobs and should about get you the magic number required. One other thing, what tyre pressure you runnin Browneye? :)

@dylanzrim3635 2 жыл бұрын

What fuel are you running again? Ethanol? On warm days with repeated running ethanol can vaporise and take prime away from the fuel pump

@kryptux2463 2 жыл бұрын

is that AFR gauge on dash correct?

@smithy2 2 жыл бұрын

That 1st gear is horrible, But still looked like a great time 🤙

@BrowneysGarage 2 жыл бұрын

Yep, stock gear/stall converter BTR things! Was a killer day though 👍

@anthonywhelan8373 2 жыл бұрын

Set of diff gears it’ll go 13s

@TheTuffxr6 2 жыл бұрын

Your going to break that motor in no time with those 13.4 AFR at full song. You need to get some more fuel into that tune.

@BrowneysGarage 2 жыл бұрын

Yep, only saw this when editing the video. On further review the first 3 passes were similar. Helmet camera was turned back on for very start of last pass (then died again), this and runs 4 & 5 were much better. May have to look into this further.

@UNIMPEEDED Жыл бұрын

What about the difference in the compression in the NA Barra. Does the turbo cause issues running it on the 10.2 NA motor? I’ve just recently blew up my BF turbo motor, and put a NA with all my stuff off the old turbo motor, including the original harness. but haven’t pushed it into boost yet. FYI it was watching your channel that inspired me to do it, and I got a NA motor for under a grand instead of spending 10k+ for another turbo motor.

@wantcheapbuy 2 жыл бұрын

Hey mate, my 05 ba xr6t has a few small mods and the btr. Its pushing 10 psi as well. Whenever the tank is lower than 2/3 full it does exactly that too.

@BrowneysGarage 2 жыл бұрын

Crazy that such a full tank can still give it issues. Think a larger capacity pod for the fuel pump will be coming shortly to try help.

@wantcheapbuy 2 жыл бұрын

@@BrowneysGarage oh sorry I meant 1/3 full haha. My bad. It did it before and after changing the fuel pump as well. I just thought it must be a setting in the ecu but now I’m thinking it’s actually starving for fuel and the ecu picks up on that and cuts timing. Not sure. I’m no tuner.

@BrowneysGarage 2 жыл бұрын

Makes sense, I’ve heard of it as full as over half a tank. Is second hand though, not personal. If you haven’t already change the fuel filter, I did again earlier this week and that alone looked to be a factor in some poor AFR’s. More testing to come

@wantcheapbuy 2 жыл бұрын

@@BrowneysGarage looking forward to it champ. Cars only done 115000 kms. I changed the pump and filter around 100000 amongst other serviceable things just for a freshen up but still did it. If you come up with a solution, which is likely a sponge at the fuel pickup or something, I’ll probably copy you. Haha. Cheers.

@apsallpartsolutions7312 2 жыл бұрын

Where is my present Browney… as I guessed the time 👌in your previous video.

@BrowneysGarage 2 жыл бұрын

You were nearly bang on, got beaten out by a 14.015 guess.

@nathanway20690 2 жыл бұрын

Man are you watching the afr . Its running pretty lean

@Getsum-ii 2 жыл бұрын

I feel like the slow take off in the ba is alot slower then the bf The btr isn't the best heat wise All mine have seem to overheat and loose 4th after a while And that n/a everything No disrespect but im very surprised that stock n/a btr is holding up with that turbo kit 😬 Maybe next car bf or fg 🤔 Get that quicker 1.5second take off with a factory turbo kit 🤷‍♂️ Same car with 2 extra gears and 1.5 to 2 seconds quicker with the same things done to this

@KaidenOZ 2 жыл бұрын

the BTR equipped cars have a longer gear and a worse dif ratio than the later models, not usually worth swapping unless you go for the 6 speed upgrade to take advantage of the better dif ratio otherwise you are just trading away your top end for bottom end.

@Getsum-ii 2 жыл бұрын

@@KaidenOZ thats what I'm meaning by getting a bf brother! Zf 6spd auto as you can't zf swap a ba/xt barra better off buying a n/a bf and installing a factory turbo kit to try reach 11.90 or something closer to 10 rather than 13 🤷‍♂️

@happydaze4213 2 жыл бұрын

Not all BF falcons came with the zf6 my bro It was an optional extra from the dealership

@Getsum-ii 2 жыл бұрын

@@happydaze4213 yeah I have had a "bf" that had a btr But for example I mean buy a 6speed zf not a 4spd 🤦‍♂️ Might as well keep this green machine 😂

@BrowneysGarage 2 жыл бұрын

All good, thanks mate. Car is here to stay though, especially when we're only a stall converter, diff gears or both away from big improvements again on the times. Plus, I'd much rather the price of replacement/built BTR compared to same for a ZF!

@lewiscattell6060 2 жыл бұрын

Would tiptronic help

@danielveldman4690 2 жыл бұрын

first REAL comment yeh boiiiii nice work mate

@BrowneysGarage 2 жыл бұрын

Hell yeah, thanks mate 👍

@nicholassteel5529 2 жыл бұрын

No….keep building

@BrowneysGarage 2 жыл бұрын

Yeah sure it's going to happen sooner or later! 👍

@Samuelreinerlol 2 жыл бұрын

Hey man that engine light and the car shutting off is the car going into limp mode cause of your trans gear box will soon be on its way out I’ve had this happened multiple times as my na falc makes 215kw on e85 it’s good you stopped cause it’s the car telling you she’s done for the day

@skitzy2726 2 жыл бұрын

who did you send your computer too for the remap?

@BrowneysGarage 2 жыл бұрын

Maxx Performance, was dyno tuned there after the initial tune to get us around and check all was well.

@Troymans79 2 жыл бұрын

i would be a little concerned about the afr readings, 13 to 13.5 is too lean for a turbo car at full throttle , they should be around 12 to 12.4

@BrowneysGarage 2 жыл бұрын

Good eye, I noticed that when editing too! Think it was only that run, I know later runs were much richer so NFI what was going on in that one. Thanks for the heads up though mate, if I hadn't had to play it back far too many times while editing I may not have noticed 👍

@BrowneysGarage 2 жыл бұрын

On further review the first 3 passes were similar. Helmet camera was turned back on for very start of last pass (then died again) and showed it to be much richer at the start of the run like 4 & 5. Still something to do some thinking on.

@Troymans79 2 жыл бұрын

@@BrowneysGarage yea, you might be on the right track with the fuel pump starvation at the end of the run , possibly the pump cannot maintain the fuel pressure hence the afrs also going lean, i assume it was fine when it was tuned .. might be something to consider

@stevenbruzz6050 2 жыл бұрын

Engine light on a BA is throttle error

@robbieaussievic 2 жыл бұрын

.... I was wondering what the programmed conditions were for engine light AND shut down. I don't believe there is a engine shut down condition at all, (too dangerous, e.g. intersection). I think the cause of the 'Check engine light' corresponded to the stall. Computer diagnostics from mid-2000's (first AU OBD2 don't forget) were not that sophisticated I assume.

@stevenbruzz6050 2 жыл бұрын

@@robbieaussievic only way a check engine light comes up on ba is throttle body and TPS correlation It could cause it to stall out ive had it happen n car just runs rough till u restart it

@robbieaussievic 2 жыл бұрын

@@stevenbruzz6050 .... Yeah, sounds right. not very sophisticated. Do you think the solinoid or the flap stuck ?

@stevenbruzz6050 2 жыл бұрын

@@robbieaussievic throttle blade could of been sticky.

@JP-ry9ob 2 жыл бұрын

Shouldn't you be driving through the water and then spinning them up?

@dylandesmond 2 жыл бұрын

Turn up your grub screw on your gearbox so it changes more aggressive and holds the gears longer... 1/4 of a turn should increase it. Open your exhaust if you haven't. There's usually 1 fake pipe that is blocked off, you can see it by the different colouring on each pipe if you have a dual exhaust. Cut it open , bash through the closed piece with a bar and hammer, dremel out the rest if need be, and weld it back together. That'll get you a quicker time without any crazy mods.