Joe Glaser breaks down the installation of the Nashville 3 Pickup Blend Wiring Harness. You can check out the 3PU wiring harness, plus our full line of other products at musiccitybridge.com.
About the Nashville 3 Pickup Blend Wiring Harness:
We use top-quality CTS and Oak Grigsby components and the harness is hand-wired by professionals at Glaser Instruments on an illustrated card to enable easy addition to any T-style guitar.
The new Nashville 3 Pickup Blend Wiring Harness makes available an updated way to get all of the sounds of the Brent Mason Wiring with several improvements. Specifically, this version improves the blend feature in 2 key ways and eliminates the need for the 3rd knob.
The update allows the player to set and save the amount of middle pickup being "blended" with the bridge PU when the switch is in the bridge position. This means you can move the switch and return to the bridge position with your blend intact. Originally, the player had to add in just the right amount of blend in the bridge position then dial it out to go to any other position, then find their perfect blend again.
Our new custom blend pot allows a much more gradual blend than a standard pot which, when acting as a sub-volume to the main volume, puts all of the blend control between 8 and 10 of the sweep.
Components:
Oak Grigsby 5 way switch
CTS 250 Control Pot
Custom CTS Push-Pull Pot
Preferred Pickups:
Neck: Gibson Mini Humbucker or Seymour Duncan Antiquity II Mini Humbucker
Middle: Seymour Duncan STK-S2 Hot Single Coil Pickup
Bridge: Seymour Duncan Tele Vintage Stack