Nicks Builder Pro Cutters Choice Steel Toe

Nicks Builder Pro Cutters Choice Steel Toe - Walnut Owners Review

Рет қаралды 8,562

Collected Over Time

Жыл бұрын

A video to assist those looking at Nicks boots and to get an idea about my experience with them and sizing.

Пікірлер: 62

@cgriebel1 Жыл бұрын

If it's worth anything, I own two pair of Nicks Roberts (55 Last/Dogger heal). One pair were purchased a few years ago and the other about a year later. I also own a pair of Iron Rangers, which were purchased about a year or two prior. I was sized by my local RedWing store on their machine, and came out a 10.5 (normally, I'm wearing 10D). The woman who was helping me said she'd get a 9.5, as downsizing one full size is typical. I put one foot in those, and said "gimme a 9". Those 9's fit like a glove in the store, and only got better thereafter. I did the Nicks foot measurement thing, got my test pair, and was astonished to see the size on the box was 8.5EE (!). I threw those puppies on, and sure as shit, they were perfect. Sent those back and waited for my (first) ordered pair in walnut. I had no problem breaking them in (nor did I have any issues with the RedWings). Love all three pair, but I have to admit, the Redwings are "light-weights" compared to the Roberts, but my IronRangers feel as if they're spray painted on. No lie. My Roberts are awesome fitting, but you certainly know you're wearing a substantial boot as your heel plops into the heel of those Roberts with authority. The chicks love these things btw - my Nicks get noticed everywhere I go. If you can't get laid wearing a nice pair of Nicks, don't blame it on the boots.

@collectedovertime3291 Жыл бұрын

Hi Chris! Your comment is certainly welcome and very much worth a reply! Regarding the RW IR’s I am a full size down from Brannock! (11 Brannock and wear a 10D). My IR’s as you eloquently put “fit like they are sprayed on”. I also have a pair of other RWs that are EE width that I purchased in 9.5EE and they fit well. I really think width has so much to do with correct sizing. Unfortunately with mass produced boots and footwear, regardless of your foot shape etc are stuck with either D or EE and the variation in brands is so incredibly frustrating! My personal experience has been great, from someone that couldn’t do the try on scenario and I don’t think most people need to if they follow the Nicks Instruction, you sir are obviously an exception to the rule! It is a great feeling having a pair of great boots that fit perfectly, well done mate! Regarding the getting laid bit, I think that even if you have a face like a half sucked twisty, you will still get laid if wearing the custom order I am very patiently waiting for! Thank you so much for watching and sharing! 😊

@cgriebel1 Жыл бұрын

@@collectedovertime3291 Haha. You're welcome. Yeah, Nicks called the shots on the sizing and they're a great fit. I'll admit, when I saw 8,5 on the test fit pair, I was blown away.

@soldiers23 11 ай бұрын

Hello Guys, really very useful comments. I wanted to ask you also about Red Wing IR sizing to Nick’s. I am wearing IR 10.5D with Darn Tough socks feel them like “second skin”.My sneakers are size 11Е. Using Nick’s paper sheets giving me 13.5 EE.Very confusing.

@nicksboots Жыл бұрын

Great review! Thank you!

@PNWBootMan Жыл бұрын

Great boots man very nice camera as well. Really enjoyed it. Keep the updates coming on your break in.

@johnversluis3084 Жыл бұрын

Great review mate !! I found the Redwing digital measuring device measure close no perfect I measure a 10.5 E and 10 E on right and I have my Nicks at 9.5 EE and that is perfect fit for me . The sale person was fitting recommend a 10.5 for both and said NO to much heal slip I hope this helps some one

@evergreenorganics Жыл бұрын

Great video. Thanks for sharing. I’ve got those exact boots and I just love them.

@collectedovertime3291 Жыл бұрын

I’ve seen your two vids mate! Yep great boots. Thanks for watching!

@HeritageCast 11 ай бұрын

Awesome vid love to see some updates on how they are doing..... PS do a video on boot brands from AU. Other than Razorback im not aware of any...

@bensuave9431 Жыл бұрын

I wear a 10 wide in red wings but I can feel the front of the boot when I stretch my toes. I ordered a 10 EE and it is a half size to big. Not big enough to screw me up but I could fit a 9.5 EE. I did the cutters choice also.

@boomerang379 Жыл бұрын

I’m fixing to put my order in today for a pair of custom builder pros. They’ll be 55 last, smooth 10 inch 1964 brown with soft toe and the digger heal profile with the he 5/8-3/4 heal stack.

@davidhoward7691 11 ай бұрын

I used the sizing instructions from the Nick’s website. I have two pairs of Nick’s and both fit perfectly.

@PNWBootMan Жыл бұрын

Great video thanks

@SI-lg2vp Жыл бұрын

Glad you were able to get in stock boots to fit. The custom order lead time with the try on fit option takes a very long time to get.

@collectedovertime3291 Жыл бұрын

Hi mate, I didn’t get an in stock boot. I ordered a “cutters choice” takes a little less time but still a custom size order. Unless you have odd shaped feet I would goto a store that has a Brannock, get measured and take 1/2 size away. Worked for me and seems to be the recommendation. Thanks for watching

@SuperDuty23XL Жыл бұрын

Great info. I’m thinking the same on the width. I’ll be ordering a pair soon.

@collectedovertime3291 Жыл бұрын

Just an update, so the boots I reviewed are a steel toe and I am very pleased with the size, no toe tub and enough wriggle room for when my feet swell when working. That said I purchased a pair of Robert’s with a Celastic toe from the ready to ship section that are a size 10E. They are perfect ! I think moving forward I will by non steel a full size down from Brannock and steel toe 1/2 size down. Not sure if that helps your decision.

@SuperDuty23XL Жыл бұрын

I ordered mine on 3/13 (cutters choice) ; they showed up on my doorstep on 4/3. At first I didn’t take a second look at the box because I wasn’t expecting them yet! I ended up ordering a half size down from my Brannock measurement and an EE . This turned out to be the correct size for me. Was apprehensive when first trying them on. Feel like I got lucky. Thanks for sharing the info . Love my boots!

@collectedovertime3291 Жыл бұрын

@@SuperDuty23XL great to hear! I have been happy with the 1/2 size down on my steel toe cutters, if had the option to full size I wouldn’t for the steel toe. Since this vid I bought a pair of Robert’s waxed flesh with celastic toe in a 10E, and they are a perfect fit. So in summary for me steel to 1/2 size down, regular toe 1/2-1 size down. And honestly a think pair of socks vs a thin pair of socks can make such a difference! Thanks for taking time to comment. 👍🏻

@deadnuts63 Жыл бұрын

NIce boots. Nice deck.

@collectedovertime3291 Жыл бұрын

Finally someone noticed the deck! Haha. Thanks for watching! 😜

@bobjohns8914 11 ай бұрын

HI- Just got mine - same as yours. But Honey outsole. Almost want to say mine have a bit of a purple hue to them...

@jonathandudley678 6 ай бұрын

Hey mate great review, glad to hear from another Aussie. Did you have any customs issues importing them to Aus? Im considering a pair, but it seems if the value ticks over 1000, customs may sting us for extra tax and duties charges. How did you go with that?

@collectedovertime3291 6 ай бұрын

Gday mate!! The tax applicable does not include shipping charges. So work out what the boot cost is USD to AUD and if under 1K then you will be fine! If it’s over slightly, grab a coin and flip it. Fingers and Toes crossed they let you through. I didn’t get charged because the value when I purchased was not over 1K. What are you thinking about getting?

@hemlock1013 Жыл бұрын

I have a pair of boots just like those but a soft toe 67 last. Love them. Also love that deck! What type of wood is that deck?

@collectedovertime3291 Жыл бұрын

Thanks for watching mate! Australian Merbau 90mm boards!

@user-vl3cx1ik2d Жыл бұрын

Hello, when choosing "Lineman Shank", there are two options to choose from, which is recommended and "Yes - I am on spikes/gaffs most of the day", I don't really understand what the second option means.

@armanymendoza4117 Жыл бұрын

Its shank or no shank . Having a shank can add discomfort so is only reccomended if needed for work

@user-vl3cx1ik2d Жыл бұрын

@@armanymendoza4117 thank you

@F.R.G317 Жыл бұрын

Great review!! I ordered a custom pair of builder pro 10 in all roughout walnut, 55 last, classic toe back in November and I think I've narrowed down my size I can wear a 9.5D iron ranger but it's a tad snug on the sides so I went with a 9.5E on my order I hope it's close I wear a 10.5 in sneakers and a 10 in most work boots

@collectedovertime3291 Жыл бұрын

Hi mate! Thanks for watching! I would say you’re sizing will be good for the way you like to wear your boot. I’d anticipate when you get it it may be firm but give a little, the same way your iron rangers have. If you’re a 10.5 in sneakers I would dare say that is your Brannock size, so I would also guess that you could fit a 10E if you wanted the little extra room in the toe box! For reference my sneaker size in a 11US which is the exact same as my Brannock. I wear a 10D in Iron Rangers and 875s. I found that by going 1/2 back from Brannock was perfect, however I think if I had a celastic toe and not a steel toe, I may be inclined to get a 10E meaning a full size drop. My standard order I have in place is a 10.5E also. Thanks again for watching!

@F.R.G317 Жыл бұрын

@@collectedovertime3291 that's all correct! Thanks for posting the review and am looking forward to your update!

@Shaboomquisa Жыл бұрын

the last really matters. I think the 55 is a bit pointy at the toe box

@Shaboomquisa Жыл бұрын

best way is to measure your foot with a tape measurer around the ball of the foot. I have a pair of 7.5 Americana and 9 urban logger and they are essentially the same size. a quarter inch difference. best way is to try it on see if it fits if not send it back.

@collectedovertime3291 Жыл бұрын

@@Shaboomquisa agree about measuring the ball of the foot for width. Are you a size 7.5 in Americana and a 9 in urban logger? Ideally I agree with what you are saying regarding trying and sending back if they don’t fit, however as I live in Australia, I really needed to make sure of sizing, hence following Nicks advice. For me to send back and have resent would have cost me close to $350 AUD in shipping costs !

@pengkianma4368 Жыл бұрын

My Grant Stone 11.5 EEE. I'm thinking of getting ready to ship builder pro 11.5 F Steel toe. Will the steel toe narrow the toe box ? Cheers

@collectedovertime3291 Жыл бұрын

Hi mate, pretty sure the steel cap is built over the last. So if you pick your right size you shouldn’t have any issue being steel or soft. Only difference is that if you do happen to go too narrow the leather will break, whereas the steel toe won’t! Good luck mate, if you are really worried Nicks have a size chart on their website to match your width to your size.

@nafis6668 Жыл бұрын

thanks for sharing with us. do you have high or low arch sir?

@collectedovertime3291 Жыл бұрын

I would say I have a regular arch, not flat and not high… somewhere in the middle. The 55 last on the builder pro is not a severe arch in my opinion. It has been very comfortable to wear so far. 👍🏻

@nafis6668 Жыл бұрын

@@collectedovertime3291 i concern if i cant run with those high heels, i've been eyeing on the HNW at the moment.

@Condor1970 Жыл бұрын

It was probably a good idea to get the E width. For steel toes, it's nice having a little extra room so they don't rub the sides of your big toe. Steel toes don't stretch.

@collectedovertime3291 Жыл бұрын

Couldn’t agree more mate! They are perfect and any slight toe rub has gone. I have since purchased Roberts in 10E and they are exactly what I am size wise for soft toe. After experiencing both I recommend a full drop in size from Brannock for soft toe and a 1/2 size for steel! Thanks Legend. 👍🏻

@Condor1970 Жыл бұрын

@@collectedovertime3291 ...hmmm...I'm 11.5EE Brannock. I ordered the Robert in 11EE. I hope they're not too big.

@collectedovertime3291 Жыл бұрын

@@Condor1970 I would say you will be still okay! It really depends how you like to wear your boot too. I wear thicker socks in my BPs and thinner in my Roberts, I feel if I wore thick socks in my Roberts they might be a little snug, amazing what socks can do. TBH when we are talking half sizes there is 1/8 of an inch difference I’m pretty sure.

@collectedovertime3291 Жыл бұрын

@@Condor1970 also that’s why I got the cutters choice first because I couldn’t wait for my custom order to arrive, which by the way I ordered 13th November 2022 and has only just been shipped and yet to arrive! 29th June 2023!! I got my Roberts on the ready to ship section…

@dragonbulley 9 ай бұрын

I wasn't sure if i was gonna do walnut but I am. How much they way?

@collectedovertime3291 9 ай бұрын

3.5kg mate. Just weighed them. They are a hefty boot. Great boots!

@craigcook6300 11 ай бұрын

I have a question on sizing I used the diy guide and my size length Is 14.5 but in the normal boot I wear is oliver I'm a 11.5 is this a normal thing between Australia sizes and usa?

@collectedovertime3291 11 ай бұрын

Hi mate, you’re talking about the sheet you print from the website? If so sounds like that’s a little off. I have worn Oliver’s but can’t recall exactly what size I was. Most recently though I have worn Steel Blue (referencing another popular Australian boot brand). My size in Steel Blue is a snug 9.5 AU because they run a little wide. I can also comfortably fit a size 10 AU which is a full size down from my Brannock which is 11D. I have 3 pairs of Nicks, my Builder Pros are a Steel Toe and I am a 10.5E. My two other pairs are Roberts with Celastic Toe and both are a 10E. My advice to you is to go to Athletes Foot or similar, get measured in your Brannock, the digital measure they offer will do the same. If you’re getting Steel Toe I would go down 1/2 size to avoid toe rub, I decided to widen one increment to a E. With my Roberts and non steel toe a full size down and still the wide increment has been perfect for me. Hope that makes sense!

@craigcook6300 11 ай бұрын

@@collectedovertime3291 hey mate i went to a podiatrist and got my feet sized on the diy sizing chat you print out. the width is pretty much spot on but the length is longer it must be a custom thing. its the bit that's freaking me out i think I'll ring them and ask the question. it's my first time buying them the cost is making me second guess my self.

@craigcook6300 11 ай бұрын

@@collectedovertime3291 i have another question for you what was the cost for postage and did you have to pay any extra tax on them to get them in Australia? (im in qld)

@collectedovertime3291 11 ай бұрын

@@craigcook6300 I paid $109 US for shipping on my last order. Bloody expensive and is a pretty slow service for the money. Took a month to arrive once shipped!! Filson on the other hand (another US brand) are fantastic and not to expensive. All you need to worry about tax wise is that the purchase price is under $1000 AUD. It’s worth noting that shipping does not make up part of your purchase price for taxation / imports. Good luck

@craigcook6300 11 ай бұрын

@@collectedovertime3291 I'm glad you mentioned Filson I've been looking them and Carhart as well it's good to know these things.

@andythecableguy_3009 Жыл бұрын

How long did it take for them to be made?

@collectedovertime3291 Жыл бұрын

It was about 5 weeks.

@johnvelas70 6 ай бұрын

how's the toe leather holding up?

@collectedovertime3291 6 ай бұрын

Hi mate! The toe is still perfect. If you did a trade on your knees all the time might be worth a toe cap, but in general use and bumps etc I’ve had no issue. Great boots.

@johnvelas70 6 ай бұрын

@@collectedovertime3291 good to know, my new job says corks are a no go but i need a steel toe.