Thank you for such a great step by step process! I was able to repair my son’s Switch and he is over the moon being able to play it again. Thank you for this video!

Another very satisfied viewer - contemplated buying a whole new Switch, then went this path. Saved big bucks. Thanks man!

Thank you so much! This video was super helpful. My kids were so grateful I was able to fix their Switch!! Very clear and easy to follow directions!

Thank you so much for sharing this video with us. I followed every single step, and it worked! My little one was so happy.

Amazing! Worked perfectly! Thank you for taking the time to make this

Thank you so much! I was able to fix my son's Switch by watching along with your video!

Thanks for the great video

Thank you!! I was able to fix mine without removing the heatsink! Everything works perfectly fine now

Thanks for this…worked like a charm! Way to make us all out to be hero dads 😎

Wonderful video. I fixed my kid's switch following the video. Thank you so much

Thank you so much!!!!! Your video was great and easy to follow along 🙌🏽🙌🏽

Thanks man, loved your "extra" tip/advice you provided in the video. I used to tear down laptops back in the day so it's been a long time for me. Kids "cough"

Worked perfectly, thanks!

Wonderful video. I've never done a DIY repair on any electronic device before, but I was able to follow step by step to fix my son's switch. Thank you for your help

This momma just replaced her kiddos card reader! Great video. Thanks so much!

Awesome and in-depth video! Thanks man, it helped me a lot!

Thank you! I was able to fix our son´s Switch.

Thanks for the helpful video. 👍

Great job, thank you!

Thanks for the guide. I was able to save my nephew's switch.

!!!!!!!! SUPER HELPFUL VIDEO !!!!!!!!! i only got to @10:45 to complete my task. you are well informed and to the point thanks IT WORKED PERFECTLY

thank you so much I was able to fix my switch because of this

Thanks man! This was super help. Unfortunately, I will need to take 100% of the credit for maximum props😎

Thanks i used this video to fix my switch for a school project for 8 th grade thanks

Great video, thank you :-) Just ordered a card replacement from ebay today, now I know how to replace it.

Much better practice is to clean all old thermo paste and only then put the new one.

Oh my god thank you very much my first problem was that my sd card reader didn’t read my sd and my game reader was not working too so I found your video and was able to fix my game card reader and then when I turned on my switch my sd card reader was working! I think the problem was that my sd card reader was not connected and after doing all the steps I reconnected it 🤩!! Thank you so much for your video

Yes! Finally it worked out thanx to your video, but it was not that easy for me. First time i opened it up and reassemble all the parts, the switch seemed to be almost dead. Switched it on, Nintendo logo appeared and then nothing more! I opened it up again, connected better the new component to the mother board, cleared the old compound and put it on the new one (swipped this passage the first time) and it worked again... but with no touch screen! Opened it up for a third time and found out the i did't slide the touch screen connector correctly into its slot. That's because it was very hard to insert it correclty in the new card reader component. I struggled a lot to get it in deep in the slot (I had to push the side wings with certain strenght to get it deeper than before), and some other videos helped me out understanding what I was doing wrong, but... Well at last I won! ;-) So don't panic if a first attempt is not succesful. Easily you didn't reconnect well the new part! try again with no fear.

Thank you man

Thank you so much! This was easier than I thought. Beats buying a new one! 😀

Haha dude, always the struggle with the force. Ripped apart some things lol

definitely need to replace my game card reader. Just got a new Switch a week ago. I put in a old game and when I ejected it the game pulled the freakin' pins.

This worked like a dream 🎉

Thank you so much!

I find this very helpful! I recently accidentally broke my Switch's game card reader by moving one the of metal pieces out of its place. I'm glad to know it only is ganna cost a replacement!

Thank you 👍

Thank u so much bro

Question: So when I did this, everything went fine in the end, except that I didn’t know that you weren’t supposed to separate the orange joy con connector piece from the medal side piece, in which I Disconnected the orange piece from the joy con connector on both sides. Is there any way I can reconnect them again? Because now I can’t use handheld mode, because I can’t figure out how to put them back

Hi, great video! However at 9:50 I accidentally tore the black cable getting it out of the tab. 😖 is there any way to buy another cable and replace it?

will this fix my game card error problem? and what would i need to buy to repair it?

Where can I get the tools and parts you used in this video? I want to know since I need to get my switch fixed soon

Where did you bought that screwdriver you used for the bottom and side screws of the switch?

Do you need just an Ifixit card reader or can anything else work

hi if you can put the link where you found the part in your discription

Hey, I just replaced my game card reader and followed your repair to a T, but now my touch screen stopped working after I reassembled it. Any reason why that might happen?

Hi can you send me a link to get your repair kit or do you know where i can get one

Next time actually show the cartridge working,...ive replaced the whole switch 100% plenty of time and at times you do get DOA parts.👍👍

By chance do you have a link to the screw drivers I will need to buy?

wher sis you buy the gamecard replacement?

Great vid just old thermal paste should be cleaned off with alcohol and replaced with the new application also that spreading of the thermal paste like that aint great either but other than that thanks for the vid

Can you do me I need a new card reader

How much do the ifixit things cost

Thank you sir! You saved me lots of hours that I would've been forced to hang out with my offspring. Lol jk. Seriously thank you, can't wait to beat their a$$es at smash bros now hahaha

Need to remove the power cable before removing card reader slot ...

I get that it's his first time with a Nintendo Switch still the way he was ripping off those joy-cons it's no wonder why they're not broken with how rough he was with sliding them off the switch especially the right side joy-con because at least to me it didn't look like he took it all the way off before he tried to yank that Joy Con off that Switch. By the way no I'm not saying he yanked the joy-cons off the switch but on either side he didn't completely slide those joy cons all the way off because once again at least to me it look like he left them partially on and then yank them off the rest of the way.

I followed the steps but when I turned it on it the touch screen didn’t work

anyone else stressing out about the battery still being connected the whole time?

Didn't work for me....plus I lost touch screen Capabilities...SD card won't read...game cartridge not showing up...ect....I'm just gonna get a new switch....

You don't need to take the heatsink out to replace the game card reader. This is an unnecessary step.

Can you please do a video of how to change the Card Slot Cover on the Switch OLED? I’m begging KZfaqrs to make a video of how to change it. Because Not One Person uploaded a video.

Unfortunately installing a new card reader did not solve my "The game card could not be read" 100% of the time. If I wedge a thin piece of metal to press the card against the pins, then the game works. I must have bought a faulty card reader from a different vendor.

I don't want to give my Nintendo switch surgery.

Where didyou order game reader part

Hi im in phlilpines Do you accept repairs in the phlilpines i broke my dads switch and the game card reader isnt working And now my dad is asking me to pay is it ok you repair my dads switch for free?

Why didnt you put a game card in the switch and show it working?

4 minutes for 4 screws……. Im not trying to hate but im hating…… lol sry but no sry