Nitro Engine Powered Water Pump

Рет қаралды 3,287,427

6 жыл бұрын

►Subscribe! bit.ly/2m1d1y7
►T-shirts & Hoodies! bit.ly/2kABytm
Check out my lathe and camera equipment on Ebay!:
kit.com/JohnnyQ90
Anycubic i3 Mega 3D Printer:
COUPON for EU plug: I3MEGA / $309.99
COUPON for US plug: I3MEGAUS / $355.9
www.gearbest.com/3d-printers-...
www.gearbest.com/m-promotion-...
COUPON for other non discount tools: GBTE / 12% OFF
This one took longer than expected but I finally did it! It's leaking in some places but it can be fixed easily!
Support my videos!: / johnnyq90
Subscribe to my channel! / johnnyq90
Follow me on Google+ plus.google.com/u/0/b/1046338...
Follow me on Twitter! / johnnyq90
Songs:
1) Epic Trailer 04 - Johannes Bornlφf
2) Power To The People 1 - Jack Elphick
3) Fitnessglo - Time Bomb
4) Fight For Glory - Niklas Johansson

Пікірлер: 1 300

@johnnyq90 6 жыл бұрын

Anycubic i3 Mega 3D Printer: COUPON for EU plug: I3MEGA / $309.99 COUPON for US plug: I3MEGAUS / $355.9 www.gearbest.com/3d-printers-3d-printer-kits/pp_641324.html?lkid=11381146 www.gearbest.com/m-promotion-active-336.html?lkid=11381162 COUPON for other non discount tools: GBTE / 12% OFF

@lordzeppo 6 жыл бұрын

JohnnyQ90 gearbest are fraud and will charge extras for shipping stuff keeping your printer and your money hostage meanwhile.

@johnnyq90 6 жыл бұрын

I know, but why is it bad?

@chriss1914 6 жыл бұрын

JohnnyQ90 it looked like the screws might have not been long enough. Even though you had "some" thread engagement it might strip if you don't have "enough" thread engagement. There is quite a bit of pressure inside the cylinder. Also you can over cool those engines. That will not hurt them, they just won't run right.

@stephenc7123 6 жыл бұрын

JohnnyQ90

@shannonashley3469 6 жыл бұрын

JohnnyQ90 hey I want to put one I'll have a new shower when I go down to the beach

@Mad.Man.Marine 5 жыл бұрын

That thing moves a substantial amount of water for its size !! Fantastic job

@BaileyEvans 6 жыл бұрын

Your work has really progressed over the years, very well done! I would really like to see you be the first to make a functional turbocharged 4 stroke nitro engine

@johnnyq90 6 жыл бұрын

Thanks man! I need to search it a little more and see if I will make the s/c myself, or buy it from rbinnovations. We'll see ;)

@BaileyEvans 6 жыл бұрын

JohnnyQ90 not a supercharger! I'm talking an actual miniature exhaust driven turbocharger, I have never seen it done!

@henria.277 6 жыл бұрын

Bailey's Garage 2 strokes actually supercharge themselves on their 'powerband', so sticking a turbo or supercharger will just restrict the airflow and it will run like shit.

@BaileyEvans 6 жыл бұрын

This is Squaal this is why I stated 4 stroke in the original comment.

@eugenelau1525 6 жыл бұрын

That not possible unless he makes an engine from scratch. You cant simply convert a 2 stroke into a 4 stroke engine.

@RobertMilesAI 6 жыл бұрын

Mount it on a little raft with the intake at the front and output at the back

@tracywelling9230 3 жыл бұрын

YESSSSS that would be so funny lol

@ryanjoseph9519 2 жыл бұрын

Also make it rc

@purelife9000 5 жыл бұрын

Your vidz make me ashamed of just how little I've done with my life.

@rcplayer7581 4 жыл бұрын

Me2

@Steinblocksebi 6 жыл бұрын

People in Houston getting creative to get the water away.

@Lyzrinn 6 жыл бұрын

Nooo you didn't !

@davidproangler6258 6 жыл бұрын

Sebastian the water is gone i was just in houstan

@calebsherman886 6 жыл бұрын

Hurricane irma boi. Help me, I hate florida.

@dieselguy62 6 жыл бұрын

i live in houston, and on the west side i still cant access the airport, because the roads are flooded. so no, the water is not gone.

@blumac9801 6 жыл бұрын

Sebastian people in Florida like me -_-

@RCTanksTrucks247 6 жыл бұрын

Very impressive brother

@jasonhughes3748 2 жыл бұрын

I’m always astounded by what you can engineer in these videos! This one is just mind blowing really. Thank you for sharing your incredible videos with the world. Bless you 🙏 always be safe

@vaulthecreator 6 жыл бұрын

Wow!! That actually has a far better flow rate than I imagined it would at the start of the vid. Very well done :)

@JoKeRAzzam 6 жыл бұрын

Man .. Seriously, that's outstanding .. What sort of specialty are you in ? Is it normal mech. engineering ?

@benjaminking4286 6 жыл бұрын

You should try making an air compressor!

@gavincrowley562 6 жыл бұрын

Benjamin King No Torque.

@milkhbox 6 жыл бұрын

Did someone say gear down for what? :D A small colab, mayhaps?

@travisman199 6 жыл бұрын

An engine is an air and fuel compressor so link two engines together and don't put fuel in one of them. Bam air compressor

@samritbhoday7774 6 жыл бұрын

good idea but it would be very hard

@pedrohlt93 5 жыл бұрын

Just attach a nitro engine to a small compressor, like those used in car air suspension. But it would need like a 10:1 reduction.

@verdatum 6 жыл бұрын

I want you to know that I really enjoy what you do, and I wish there were more channels on similar machining/engine topics with this level of quality. Keep up the great work.

@neckslicer 5 жыл бұрын

why aren't there more of this guy the world would've been a way better place

@joedirte903 5 жыл бұрын

that thing is more powerful than most well pumps

@Rapidpanda1st 6 жыл бұрын

6:14: Hmmm I wonder what kind of jaws he's using on his 4-jaw. 6:19: Oh.

@larrygomer 4 жыл бұрын

I've been a machinist and Gage maker for 30 years. Johnny you do excellent work with mad skills .

@Bob_Adkins 6 жыл бұрын

Great work. I love those little nitro engines. I used to tweak a .32 up to almost 3 HP with a home made tuned pipe, so I'm not surprised at the volume of water that little guy pushes.

@alessiosuppo561 6 жыл бұрын

Pls, do a nitro-powered air compressor next

@BlueSmokeRC 6 жыл бұрын

Alessio Suppo it would be awesome to see but idk if even the big block would have enough torque to run an air compressor. Might have to hit up that dude that makes the 3D printed planetary gearboxes for rpm reduction.

@valerijlermk556 5 жыл бұрын

Taking off my hat!. This is incredible! +1000

@wmurray9800 6 жыл бұрын

Go Johnny Go Johnny You are a gift to man kind. Thank You for expanding our minds in what we can achieve. Bless you take care and may the tool and die and engine Gods keep shining upon you.

@fat2slow 6 жыл бұрын

That intro was funny cause I thought it would show more people wanting a nitro powered water pump but it was just one person

@2STROKESTUFFING 6 жыл бұрын

Love it!

@gillyboyrg2 6 жыл бұрын

2STROKE STUFFING 4 strokes for the win! I'm joking lol I'm just as crazy as you are about 2 strokes. I've been subscribed for a while now. Ps. That engine you made is a beast!

@2STROKESTUFFING 6 жыл бұрын

Ashley's Anti Haha, yeah 2 strokes rule! Thanks!

@sebastianulloazx 6 жыл бұрын

AWE me (Man at Arms) ARE YOU THERE? XD NICE VIDEO MEN

@braiansingh9730 6 жыл бұрын

Chris Miles same man!!!!

@justanotherfreakinchannel9069 Жыл бұрын

Now I just want to see you mount one of these as the water pump in a car engine!! 😂

@andymunnings9109 2 күн бұрын

"I like how cool the engine is sustained while running with the water head Jackie Johnny. The pumping system is needed on most boats when the electric bildge pumping system fails. I like how small the item it is due to size. Good job! Johnny," 👍

@LMF5000 6 жыл бұрын

Next you should build a nitro-powered generator. One way to do it would be to use the nitro engine to spin a brushless motor. Feed the motor's electrical output into a 3-phase rectifier to make it DC. Put a big high-voltage capacitor in parallel with the rectifier output for smoothing. Feed the rectifier output into a buck-boost DC-DC converter to get a constant 12V DC output. Finally feed that 12VDC into an inverter to get 240VAC, and as a demonstration use it to run some of your power tools, or a heat gun, or a heater, or a string of light bulbs. If you're interested, I can help with the electrical side.

@SirFrag32 6 жыл бұрын

Or just use a car alternator with the proper gearing and a 12v deep cycle batter and an inverter.

@milkhbox 6 жыл бұрын

Or just get a PM motor. it would work well enough with some of the other complimentary parts. Such as the BB converter.

@oscarzt1652 6 жыл бұрын

this channel makes the coolest shit

@nomipakistanli 6 жыл бұрын

things u mean?

@SirThanosOfDiscord 6 жыл бұрын

That is funny

@Retrodogo 4 жыл бұрын

Fuck yea!

@ashleysmith3106 6 жыл бұрын

Great stuff ! Watching the lathe work takes me back to my fitting and machining apprenticeship course over half a century ago ! Wish we had 3D printers then. Had to machine mini water pump from bronze. (went on to machine single shot pistol when the lecturer wasn't looking) Ah, memories!

@ovalwingnut 6 жыл бұрын

Really well thought out.. not to mention it pumped a much higher volume of water than I would have guessed. Color me impressed. Cheers!

@HazePappa 6 жыл бұрын

can you post a link for the cooling head ?

@DerKrawallkeks 6 жыл бұрын

Amazing idea, also practical!:) works really well! Just wanted to mention, a 4,5cc nitro engine doesn't have 3hp. Maximum is around 1,5hp. I've been looking up actual dyno charts, since I didn't trust the numbers by the manufacturer. All 3,5cc are maximum just above 1 true hp.

@dega235 6 жыл бұрын

DerKrawallkeks i have a Hpi Savage X 4.6. Hpi says it has 2.9 Hp

@DerKrawallkeks 6 жыл бұрын

dega235 that's wrong also.

@DerKrawallkeks 6 жыл бұрын

dega235 i just checked. Not sure what engine is in that car, but the two HPI 4,6cc engines I could find both did 1,3hp

@dega235 6 жыл бұрын

check www.hpiracing.com/en/kit/868

@DerKrawallkeks 6 жыл бұрын

dega235 sure. But that's bullshit

@johnbrevard5966 6 жыл бұрын

This thing belongs in a Museum!...BRAVO!

@scellyyt 6 жыл бұрын

This is the coolest H²O pump I've ever seen and it has really high pressure too!

@welshgoldferret5107 6 жыл бұрын

Could you mount it into an rc boat?

@chrisvann9023 6 жыл бұрын

make a nitro powered roller skates or skate board johnny

@stanleydsouza6723 6 жыл бұрын

Thanks Johnny , for keeping and inspiring us for keeping clean and tidy your workshop, I feel I follow you always

@pzzuo1387 6 жыл бұрын

Hats off to you, Johnnyq. You are amazingly patient, and very talented.

@mauim8517 5 жыл бұрын

This engine need a Turbo.

@m4ui8o87 5 жыл бұрын

Actually a turbo for these small engines will not benefit the power it will worsen

@6.7ryan87 5 жыл бұрын

M4ui8o8 not really, a belt driven or a pro charger like turbo would be fine

@6.7ryan87 4 жыл бұрын

Random Hoerse it’s worth a try, got to expand for power some how

@winkiiiie 3 жыл бұрын

@Random Hoerse alot of 2 stroke are turboed. Just look at sleds

@misamokuzelpizu 5 жыл бұрын

thats pne powerfull little pump..

@ThumperDana 4 жыл бұрын

Small scale Jet Ski in the making! That's incredible work!

@drewwilson7352 6 жыл бұрын

This is the actual start of something special

@poisonouspython1410 6 жыл бұрын

Very cool build and machining skill. Pump volute and impeller design needs a lot of work. The rest of the build is top notch, but that pump was really holding the engine back in terms of output. Your nominal pump output was wayyyyyy less than the energy input supplied by the motor.

@tellucas 6 жыл бұрын

agreed new pump design maybe a reduction gear since I'm not aware of water pumps that can operate at the max speed of a small nitro engine (excess impeller cavitation could be issue at high speed)

@tacticalultimatum 5 жыл бұрын

“4.5cc, 3.0 Hp” are you sure about that mate 😂😂😂

@kraigthirty4991 5 жыл бұрын

I'm wondering about that also haha

@mismatch6750 5 жыл бұрын

tis be the truth, I think I found the engine too. just little torque www.aliexpress.com/item/32795451419.html

@mismatch6750 5 жыл бұрын

my mistake I think this is actually it www.amazon.com/Sport-Two-Stroke-Glow-Engine/dp/B00IQ7OAVE

@FrankTuk 5 жыл бұрын

Amazing how such a tiny pump can move so much water. Nicely done!

@battonfive 6 жыл бұрын

You never cease to impress me Johnny, your engineering skills are so awesome :-)

@travishooper8848 6 жыл бұрын

JohnnyQ90 you should ad a small noels at the end of the pipe to make it in to a water cuter

@GabrielGavlan 5 жыл бұрын

MRswagone bruh yk how stupid this sound

@qwertyxxx3837 5 жыл бұрын

Hey, Johnny! Can you made a home-made turbine for car? It will be very intеresting!

@johnbrevard5966 6 жыл бұрын

Johnny, I love what you do with these Motors...You're Amazing!!...Keep it up!

@reweydewy 6 жыл бұрын

That is impressive. NICE WORK! Surprised me to see how much water it actually was able to pump. I would imagine fine tuning the impeller size and design could make it even better. Thanks for sharing

@jonasthies2263 6 жыл бұрын

Hey Johnny make a nitro powered blender

@bashkillswitch 6 жыл бұрын

There's already been a couple commercial versions of something similar (2 cycle instead of nitro) offered at different times. Basically an inverted weed whacker power head fitted to a blender base. One was called the TailGator and the other was called the Daiquiri Whacker.

@Rubberfoxy 6 жыл бұрын

Let's blend the nitro smoothie!

@riccardodambrosio3855 6 жыл бұрын

*final pump has 3 fins*, A R E Y O U S U R E A B O U T T H A T

@runforitman 5 жыл бұрын

The final was 3...

@jacobsmith818 4 жыл бұрын

Johnny you're amazing dude! You shop, work and even you video skills are top tier! Be proud

@gavmansworkshop5624 6 жыл бұрын

I can't believe how successful that pump was that's insane thumbs up from me.

@ninoproductionsc1468 6 жыл бұрын

Nitro sewing machine plss

@kimmer6 6 жыл бұрын

Nitro dildo, please, with 3D printed geared oscillating action.

@leo-hp4uf 6 жыл бұрын

nin rruxv productions C

@leo-hp4uf 6 жыл бұрын

O tbf VCR ho

@JustinTopp 6 жыл бұрын

Just replace the electric motor on the sewing machine and then it’s done

@user-po3sb8ix2j 6 жыл бұрын

nino productions C ㅡ

@edenfrawley9247 6 жыл бұрын

Can you make an rc engine supercharger please?

@Tedminat0r 6 жыл бұрын

Eden Frawley yes!!

@runerafell4480 6 жыл бұрын

Eden Frawley look up rb inovations supercharger 😆 got one off these and they are only styling no more hp are gained by them tho

@sergioferreira5771 6 жыл бұрын

ever tried to make a little bit more back pressure in the exhaust so the air doesnt just go thru the engine from a port to the other

@leonronin2164 6 жыл бұрын

I'm a maker myself...I tell you this is no ordinary works...this is art

@MadScientist267 4 жыл бұрын

That's friggin impressive... WAY more output than I'd ever have guessed just looking at the finished pump 🤯

@Mannisworkshop 6 жыл бұрын

why johnny why

@gustavobrandao4302 6 жыл бұрын

Manni's workshop

@chuggles03 6 жыл бұрын

Nitro jigsaw please!!

@wildcoyote34 5 жыл бұрын

that's pretty neat , I was surprised at how well it works ,moves a lot of water

@esqueue 6 жыл бұрын

This is my first video from this channel and I know for damn sure that you could have made your own cooling head from the skills that I see in this video. Keep up the good work.

@MartynDerg 6 жыл бұрын

this is my first time watching a video from you, at first I thought you're a damn good engineer being able to fit all those pieces so tightly yet so well. then I saw you put a 4 sided piece in a 3 jaw chuck... I sincerely apologize if you don't have the funds, but you really should get a 4 jaw chuck. (coming from a newbie)

@hene193 6 жыл бұрын

Rich mix so the water cooling isn't enough? :/

@jhendren0001 6 жыл бұрын

Hene193 this type of model nitro engine gets most of its cooling from high air flow but since this one is mounted on a base and running under load that small water cooler won't be enough for a long period of time.. Plus it looks to hot out side in the video I could be wrong lol

@oli13a 6 жыл бұрын

The cooling water return pipe would've been better off piped into the pump suction rather than back into the high pressure side of the pump. I doubt there is much, if any, pressure differential there to achieve a decent flow of water through the cooling system. Ace wee rig though. Leagues above anything I could ever make

@patricksawyer9779 6 жыл бұрын

he's actually sing the lower pressure of the water leaving the pump housing to pull water through the cooling system. Not the most effective method, sure, but it does help with the heating. You're absolutely right, though: The return line should be on the intake line to improve the pressure differential.

@midship_nc 6 жыл бұрын

oli13a you're right, the impeller is pretty basic too. I doubt the vanes are close enough to the cutwater, plus it's a open impeller. He could design his own with a closed impeller and a proper volute casing and probably drain that bucket in a few seconds.

@jameshohimer2542 6 жыл бұрын

You have the best image and camera work on the net! A real joy to watch.

@balakrisahnanbk3297 5 жыл бұрын

I find perfection in all your works. loved it.

@SlideWays564 6 жыл бұрын

Imagine using that for a pc liquid loop xd

@milkhbox 6 жыл бұрын

XD Yeah, let's see your $1000 pc case muffle that noise!

@SlideWays564 6 жыл бұрын

I never said it would be practical xd

@SlideWays564 6 жыл бұрын

or quiet

@chrismarino4200 6 жыл бұрын

i imagine if you routed the exhaust out a near by window with some hose after the muffler, it wouldn't be overbearingly loud lol. still not practical on fuel costs but hey it'd be wild

@jockemoll 6 жыл бұрын

would be cool. But would not increase the efficiency compared to a regular electric pump. Moving water faster is not the issue, getting the heat of the chip in to the water is the issue.

@Peron1-MC 4 жыл бұрын

very impressive flow actually. its almost like outdoor tap :)

@Ferelmakina 6 жыл бұрын

You're an artist, dude

@jaccono 6 жыл бұрын

nitro water gun?

@destinylegend8098 6 жыл бұрын

Yes please

@allenmckinney9533 6 жыл бұрын

Why nitro? Why not something like a 4 stroke trimmer motor. Gasoline is a lot cheaper than nitro.

@patricksawyer9779 6 жыл бұрын

Power density and simplicity. Nitro motors are very compact for the power that they produce, which is beneficial in these situations.

@TheRjjrjjr 6 жыл бұрын

That build is awesome!

@NickAlexander_is_Awesome 6 жыл бұрын

Always love watching the lathe action, so satisfying. Great video my friend

@mattpaff7819 6 жыл бұрын

Correct me if I'm wrong but I thought that the fins of the pump were supposed to go the other way for more water flow. I mean I know it's a nitro engine and it's already crazy how much water it moves but...

@xkblxcripple 6 жыл бұрын

They are the correct way as it will suck in the water and push it outwards towards the outlet through its rotation, to place them the other way would stress it too much.

@Tjita1 6 жыл бұрын

There are lots of centrifugal pumps out there with straight fins on their impellers too, so even though it affects efficiency, the design is not super critical for an experimental application like this.

@chasemeyer6688 6 жыл бұрын

they need to be at a diagonal so its more efficient like this www.berkeleyjet.com/images/Product/large/150-L-05021.jpg there is a lot to improve on it

@nikolaierikssonkukkonen9878 6 жыл бұрын

+johnnyq90 Nice job! I did not think that 3D printed parts could hold at 30000 rpm! Always the johnnyq standard!

@kalleklp7291 6 жыл бұрын

Wow..! I'm really impressed about the amount of water this small thing moves. Nice build quality btw..

@hakont.4960 6 жыл бұрын

That has surprisingly high water pressure, nice work. :D

@ChazizMTA 6 жыл бұрын

Leaking? JB Weld is your answer

@diyhack2206 6 жыл бұрын

Johnny do you have the cure for cancer?

@englandcity6829 6 жыл бұрын

DiyHack hahaha

@divine308 6 жыл бұрын

England City Laughing your right laughing stimulates the immune system to fight of the cancer more effectively.

@crappyatlife 6 жыл бұрын

Smoking cigarettes

@mrmayonaise2435 6 жыл бұрын

This Is Better Than That Indian "Creative" Channel Using Dc Motor Instead

@whynotjustmyusername 6 жыл бұрын

Wow, this little thing has more punch than my garden pump.

@gradusnik36.6 5 жыл бұрын

Самый дешёвый насос и то больше напор выдает чем это хрень

@Mannisworkshop 6 жыл бұрын

da fuck i was working on it

@Mannisworkshop 6 жыл бұрын

i was making a nitro engine powered water pump but he uploaded the video now if i'll upload then people will say you copied him

@mspeir 6 жыл бұрын

Upload your video! If anyone can't understand that two people can have the same idea without contacting one another, they're stupid and should be ignored.

@TheCjcoon 6 жыл бұрын

Manni's workshop lol you snooze you lose

@skeetskeetskeetnigga 6 жыл бұрын

You can sit here and bitch about it all you like and look like a whiney turd or you can finish your shit and upload it ;)

@JavierBacon 6 жыл бұрын

I want to travel through time showing this video to people and see at what point they're able to understand what's going on

@MagellanBarreto 6 жыл бұрын

Você é o cara, amigo! Fico imaginando outras motorizações feitas por você! Parabéns

@Thrillowatt 6 жыл бұрын

Amazing artists in this generation: Ariana Grande Nicki Minaj Drake Harry Styles Iggy Azalea Selena Gomez Niall Horan A$AP Rocky Miley Cyrus Ed Sheeran Imagine Dragons Sage The Gemni Justin Bieber Omarion Hozier Ne-Yo Calvin Harris Ellie Goulding Nick Jonas Avicii Just Kidding! Read the first letter in each word and The True Legend will appear Outta Nowhere!!!

@itzgrizzim6026 6 жыл бұрын

And his name is john cena

@zhopka77 6 жыл бұрын

I still can't see it....

@SkippertheBart 6 жыл бұрын

montgomery mchargue *Slow Clap*

@jamesreed9669 6 жыл бұрын

Great job! Pretty decent volume of water too!

@martinoffi9249 6 жыл бұрын

I am amazed by the quality of the things you make, and the quality of your videos. Kudos to you. I also love the fact that you are incorporating nitro RC engines in your projects! keep up the awesome work! 👍

@Weird_Cat_Thingy 4 жыл бұрын

That nitro engine makes more HP than my old mini bike

@tc3sean 6 жыл бұрын

That puts out a good amount of water! Get 1000000 more of these whipped up, and shipped to texas!

@gaydarci4593 6 жыл бұрын

Very very powerful and we'll engineered pump. Keep up Johnny.

@Noogleminus 6 жыл бұрын

Congratz, you have just make the beginning of a nitro dyno. You can now make all the money in dyno'ing nitro engines.

@inactive67 6 жыл бұрын

Nice build, and very nice detail except for the exhaust. J/K the details in the pump build where absolutely beautiful great work.

@djmjr77 6 жыл бұрын

@terryeleeemail 6 жыл бұрын

Wow, nice build johnny. Really good edit and camera work too.

@ziploxian8516 6 жыл бұрын

What an amazing video, true engineer right here

@huntermetal19723 6 жыл бұрын

Dude that's some serious hammering skills

@pacowang283 6 жыл бұрын

You are one skilled and talented man

@MitchJohnson-uu5uf 6 жыл бұрын

Awesome, the nitro builds are the best, can't wait for next one.

@paulvdb6365 6 жыл бұрын

the engine watercooled by the power of the pump is a fucking genius idea !! i would have never think about that

@Tomasxt25 6 жыл бұрын

This would be an insane cololab with the computer water cooling god JayzTwoCents. Great video!!