Рет қаралды 32,062
PART 5 - REBUILD BMW N43
#OILPUMP #OILSUMP #TIMINGCHAIN #ENGINESUPPORT #CRANKCASE #FRONTAXLE #BMWE90 #BMWN43
00:00 Intro
- RE-BUILD N43 Motor SERIES Part 5
- BMW E91 2008 Touring with engine N43 ( N43B20A )
00:39 Install oil pump with counterbalance shaft.
- Using the counterbalance shaft locking tool!
- Replace screws for balancing shaft housing to crankcase
- Install screws for oil pump to lower section of crankcase (bedplate)
03:17 Install lower timing chain set
- Chain tensioner, lower chain and sprocket
- Fit nut for sprocket to oil pump and tighten down 32 Nm.
- Left-hand threads!!!
- Remove chain tensioner locking pin tool
05:22 Install oil intake pipe
- Replace and oil sealing ring on intake pipe
- When counterbalance shaft is secured,
- you can remove counterbalance shaft locking tool
- Tighten screws (M6x20) to intake pipe to counterbalance shaft 9 Nm
06:16 Install Oil sump and its gasket
- Install and tighten oil sump bolts with torque 30 Nm with new seal.
07:15 Install engine support arms on left and right
- Torque for bolts are 38 Nm
08:16 Lower front axle
- Oil pump on the N43 B16 engine does not have a counterbalancing shaft, procedure is identical.
Let’s continue with the next episode! Stay tuned!
Watch this video!
If you liked this video, press the LIKE BUTTON, SUBSCRIBE channel, leave COMMENTS and SHARE content! By doing so, you will be able to support this KZfaq-channel!
Thank you! I appreciate it! 👍
Watch my other videos on KZfaq related to the "REBUILD N43 MOTOR" -series of BMW E91 with engine N43! See the whole SERIES from here:
• BMW E91 N43 MOTOR REBU...
Also POWERDRAIN REBUILD -series of BMW E91 with N43 engine from here:
• BMW E91 - DRIVETRAIN R...
Also "DIAGNOSIS & MAINTENANCE" -series BMW E91 with N43 engine from here:
• BMW E91 - Diagnosis an...
See more pictures of the engine repair process on my facebook page: / 2263583530346253
--
My purpose is to encourage people to do things themselves!
Plus, this is a nice hobby for myself and at the same time I have the opportunity to save a lot of money by doing all the maintenance myself!
I’m not a professional with cars or motorcycles, I just want to learn how to do things myself.
If you do this service yourself, always check the correct instructions in the official service manuals. This is just my way of doing it!
Jani Voutilainen
You can follow me also in:
/ voutilainenjani
/ jani.voutilainen
/ janivoutilainen
Thanks for Music:
Crazy Thing by PYC Music | / pycmusic
Music promoted by www.free-stock-music.com
Attribution-NoDerivs 3.0 Unported (CC BY-ND 3.0)
creativecommons.org/licenses/...
and
Dance Till You Die by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Attribution-NoDerivs 3.0 Unported (CC BY-ND 3.0)
creativecommons.org/licenses/...