Amazing video. Not only printed a whole set, but reviewed creators along the way, assembled all minis and painted them. And provided a machine review on top of that. Most youtubers would split this into 3 - 5 videos. This is top quality and should see more exposure within 3d printing community.

"Resin isn't a hobby of itself" (-Posibility of shotty supports needing even more cleanup on the mini) -Needs a curing station -Needs a washing station -Resin is toxic only to be handled by gloves - A whole setup will run you around 600$ - Very space intensive It is absolutely a hobby in itself, don't make it look to be as easy to pick up as a fda printer with some filament

Lol that remark around the 7:30 mark, i 100% agree with, i literally unboxed my saturn 3, leveled the plate, dialed the resin in, and have been non stop printing for 3 months, no adjustments besides throwing a heater in the room it prints. Its a science that has been well documented and easy to follow along with. Not an art in itself.

25:37 "The rules, sir." *Plops OPR on the table and flings the dude*

Found this video by accident. Was not disappointed! You reached the point in your KZfaq life I still aim for! AWESOMELY produced btw!

Wow, that mini rater project looks awesome. I hope it takes off! I don't print often enough to contribute meaningfully, but it's a damn cool idea, and I will continue to applaud every effort to improve the quality of pre-supported files we get.

I have no idea what caused it but there's so much top tier 3D Print and Hobby content coming out of nowhere. Great job!

I agree with your assessment of "not a hobby". I've had a AnyCubic for a couple years now and I have just run gallons of resin through it with little to no messing around with it. I have to change the FEP occasionally and the standard "cleaning out the vat" chores, but aside from that it's just another consumer electronic device. One of the wonders of 3D printers is how much they just work.

Love your quick and efficient paint schemes; I agree with you in that the little bit of extra time to do the rough edge highlights really paid off. Great stuff.

Thank you so much for the kind words and the great video!

You continue to be absolutely killing it on sound design! Thanks for the attention to detail in your content creation!

Your production values are unmatched in this hobby space. Fantastic work as always, and you 100% deserve more viewership.

Amazing video; the filming, editing, soundtrack and storytelling is just incredibly well done.

Great production quality on this video. I have rewatched this a few times because not only is the content great, but it is a delight to watch.

I have watched this so many times now as I start my journey into resin printing. Thanks so much for making this!!!

what a cool video! Seriously what great production and editing! And I love the format and goign through your experiences with this entire process.

This is the only video of yours I've watched, and you've earned yourself a subscriber! Awesome production quality and I love the style of your videos

First time I see any of your videos and I learned more than ever about 3D printing in one comprehensive video. I haven't printed anything for a while, but you brought me back into the hobby.

So I just got into printing, especially minis, and this video is amazing-- I learned about new websites, stuff about my own printer, and the review system you have is straight up bonkers amazing dude. Instant sub, keep up the amazing work!

Usually I'll just watch a video I'm interested in and leave. Couldn't not like, subscribe and comment on this one. Such high quality content.

This video was absolutely outstanding! Actually getting ready to 3D print all these pieces now... Especially those guard proxies, they're so damn cool!

Another great video. Love that you include a bit of painting as well.

Awesome! Great content, I don’t even play 40k or have a 3d printer but love watching people make things

your editing and comedy skits are incredible

Really enjoying your videos, this has helped me decide on ordering the Mars 3 Pro since this is exactly the sort of thing I want to print.

Keep this up! Your production quality is perfect and improving. You are helping my printing experience by saving me time! Thx!

This video is outstanding. I appreciate all the work you put into it, and also for answering the question, "What's required for non-cardboard tabletop gaming?" We see here the rules, two different kill-teams, some great terrain, and a little painting infoz.

Great video. I really like the wall set, and thanks for the reviews. You convinced me to get a flex plate.

I learned a LOT about 3D printing from this single video! Subscribed after 10 minutes of watching it! Thank you, and keep up the good work!

Thank you so much for showing the terrain, I've been looking for a suitable proxy and thought the same for myself, they're good, but they don't feel quite right, but this kickstarter looks amazing!

Thank you so much for making this video, I picked up one of these and the mercury x during the prime day sale. Actually, had quite a few issues with amazon sending me first the wrong printer and then a damaged one, finally the third one works and is amazing. But I have been lacking in knowledge, pretty much just going at it and making whatever I have wanted, which is great but sometimes the prints turn out poorly or I don't understand settings. Finding this video has been a greet teaching moment and I cannot wait to dive in more when I have time to make even more high-quality prints. Oh, and that carbon filter works in my opinion, at least with water washable resin. I have had no issues keeping it running at my hobby desk, however I do have a bottle of normal resin as a gift so it will be spending some time the garage when I get around to using that up.

Great vid!! Terrain looks amazing, might have to check that out. I knew Puppets Wars stuff rocks - glad you agree!!

veeeery nice. gotta say you impressed me witth the painting. i love the little bits of detail you bring out in your models. well done OIASS

nice - good long format video, nice choice of subject and good editing - well done :)

Great video! So many reviews and useful information all in one video.

Brand new to the channel and I am loving your content! Also The Red Makers came out with a set with all the void guardsmen kill team options, and a creator Piper Makes is currently working on the kroot kill team as part of her December release. Cheers!

So glad the algorithm has deigned to show your video in my feed. watched from beginning to end, great editing, great pacing and had me watching from beginning to end. I had to stifle a laugh when you used that massive flatbrush on the terrain but those solar auxillia models came out looking AWESOME. definitely earned a new subscriber.

Like @5az2 said, the end-to-end review process and fantastic production value (lighting, video quality, not recording on a headset mic in a room that's so echo-y it sounds like you're in a quarry) really elevates this above other channels. Subbed, and definitely looking through your back catalog. Str8 gr8 m8, I r8 it 8/8

I personally can't wait for your video on the sovol, I'm new myself to 3d printing and didn't know about it. Looks amazing.

Great vid, cool to see that terrain, might need to pick it up at some point as I also was looking around for sci-fi corridors. Also love seeing the shared files and recognizing quite a few creators XD. Also will need to test out the skin formula you used for your "not nids" as mine also have purple skin.

Mars 3 Pro is great! Really happy with mine and the only issue I can think of after 4 months of usage is: there is no way I'll be able to clean the UV cover from these nasty resin/IPA stains. UVtools is a must have for sure!

Waiting for your must haves in resin printing! especially the flex plate

Best 3d printing video ive seen so far, keep up the good work!

Deserved a sub! Funny you mentioned at the end about the Z lift at the end of print. On my saturn 2 it is more of a bug due to build volume and height. Causing the resin to splash all over inside the cover which slightly melts the acrylic cover. This was remedied with a quick email to support and a firmware update so that it now lifts about half way up (depending on print size) which is plenty enough to remove the prints already. However I still understand your point having owned Longer orange 10 which did not really lift after finishing the print. rant over anyway will def check more videos and your STLs and if I like what I see Ill toss in a coffee

This video is great :))

Very cool video. It was very well done. I used a mars 3 for all the stuff we create over on our patreon / tribe as well.

Damn dude, that's impressive effort for a video! Very well done and kept me entertained throughout!

This is the first of your videos I've seen, and wow i'm blown away. Only just nabbed my own 3d printer so i'll be sure to check out that tutorial and have a think about a flex plate too

I love this video. Especially as I'm waiting on my mars 3 pro. I subbed and if all your content is so high quality I don't know what to do more :)

Awesome video and the quality and editing is amazing and so too is the information given 🙂

for such a small channel, your editing is amazing. Love it!

i just randomly stumbled upon your channel, mate you have such high quality content, i was shocked when i saw how few subsribers you have! Keep up the good work, you gained a sub

Great video! And exactly the sort of thing I’ve been looking for

I love the quality of this video. Really interesting!

I love your videos! I am excited to be getting my printer on Cyber-Monday. I will be printing imperial guard and Battletech! Great videos 🎉🎉

the sound is on point! Love your videos.

When you showed off red makers, I almost shit my pants. I've bought almost everything they've made.

I've been looking for a set to print instead of getting that kill team box ( I almost gave up and bought it) so your video is just in time! :) Thanks for the shout out!

0:49 dang that's attractive terrain.

Great video thanks for your thoughts on 3D printing

Awesome video, looking forward to more from this channel.

Awesome video, high quality and really interesting. You are fast becoming one of my favorite youtubers

A really great video mate, I found it really useful.

You do great content, I envy your motivation and follow through, I hope you grow.

This is cool . Nice vid . Subscribed! I enjoyed this vid so much . Your vid editing is creative funny and keeps my attention . Nice reviews with a very different twist from most creaters. Its like an advertisement for for what your reviewing. Thank you for your insite.

Great video. Subbed. Looking forward to more quality content like this

What a great video, from printer review to mini maker review to cool paint schedule ideas, just... *Chef kiss* i do have a suggestion tho, you can use some leftover supports to put in the vat before using the self cleaning function, it will give something to grab onto and peel the cured sheet of resin instead of having to take a dip :)

Thanks for the amazing video! Looking forward to the next one

Love this video. Watched it and finally decided to bite the bullet and get a resin printer. Got the Mars 3 Pro because it seemed to do well in this vid. Been using it with Siraya Tech Fast ABS-like grey resin and haven't had much issues beyond the initial setup. Funnily enough I've started looking into doing what this vid did, making a Kill Team starter box.

How you only have 8k subs blows my mind. I honestly loved every second of this video, keep up the amazing work!

Excellent video! Truly enjoyed it.

Excellent production!

Great video, learned a lot. Thanks!

Just got recommended this channel. Cant believe you have only 7k subscribers. I smell a good fortune for you my lad! Cheers! Mr. Nurgle sends some GROW regards.

This is great content, I'm surpised you have such few subscribers. Can't wait to see what you make next.

made my purchase based off this video! i had been on the fence about whether to wait for the sonic mini 8k S as my first printer but after seeing this i think the mars 3 pro will suit my needs just fine. very nervous because i'm pretty new to 3d printing (especially intimidated about installing a flex plate properly lol), so thank you for the invaluable resource of information you bring with your videos! i'll make sure to keep doing my homework

Phenomenal video man! Honestly, your content is such a joy. Gorgeous camera work, snazzy 3D segments, and smooth audio. You think about the viewer too! You've clearly put thought into the pacing, and it pays off. Really kept me interested throughout. It's so satisfying to see a project from start to finish. Going from resin to a board of painted minis is inspiring, makes me want to whip up a project. Keep doing what you're doing man! I'm so glad I found your channel :))

Really nice informative video. Bravo!

Absolute S Tier content. Because of you I'm going to take the dive and get into 3D printing with this printer. Thank you and please make a follow up video of this printer soon! Liked and subbed! Thanks again!

In Chitubox you can do multi parameter slices for the elegoo printers to print different models at different exposure settings. So you can theoretically do something similar to what anycubic does.

Loved the video. For a Kroot option look at Clay Beast Creations, or the OPR Saurians. I do like your choice for close quarters, Tyranids are ideal for that setup. Thanks for the great video.

Just watched your Videos the first time. Really good Job! No way you have Just around 7k subscribers. Instantly subscribed. Looking forward for more of your high quality Content.

Some of the best 3d printing content I've ever seen. Subbed.

Your channel is what this hobby needed

I do not do any 3d printing or any warhammer stuff at all, yet this video was immensely interesting and I could mostly follow it. Subscribed!

Absolutely every resin 3d printer NEEDS a flexplate. I gone one and have never gone back. I got mine from Wham Bam and totally recommend them.

Wow, i'm pretty impressed by the quality of the form of your content considering your channel is still quite small. Good job

Finally found terrain that I like. Thanks for the indirect recommendation. ;-)

Interestingly enough not long after this video came out (just shy of a month) RedMakers made an 'official' proxy for the Imperial Navy Breachers.

Brilliant video. Absolutely subscribing.

Not ususally into the 3d printing vids but really enjoyed this, looked like really cool prints and the end results were awesome!

I have an Anycubic photon mono 2. I am blown away by resin 3d printing. It’s amazing at how this machine can print just about anything with no he amounts of detail it produces. I haven’t had to mess with the settings at all and I have had perfect prints on about everything that I have printed. I have had only 2 failed prints on this machine and that was my fault, lol. I had corrupted files, go figure. But with that being said it is well worth the money to get one of these machines be it Anycubic or any other brand. I encourage it thoroughly.

First video I've watched and I don't even 3d print. This was such an interesting video thanks so much! I might actually get into 3d printing just from this video alone

Great video! I come from the Gundam side of the plastic crack addiction and am very new to minis. The thing I'd love to see with minis is part separation(gold trim separated from the rest of the armor on chaos models) and snap building, a.k.a. push to fit. If there are any 3D printing creators out there that do offer such products I'd love for you to review them so I can later support them. Cheers!

Love this video!! And your content!! Follower and fan. I know this is an older video, and don’t know if it’s been mentioned, but dialing in your resin printer is also HUGE with getting prints to come out right. Lot of people just go right in without doing this and lead to bad prints, no prints or issues.

Awesome video. I've just got the Elegoo Saturn 2 as my first SLA printer and I agree, the calibration is a total PITA. Especially with the cold temperatures right now. I dialed in Eleegoo's water washable resin but had to calibrate another brand since it was past expiry (long story). But the resolution this thing spits out is amazing compared to any injection moulded minis.

The combo of my mars pro 2 and Prusa really does feel like it can make anything. I definitely don’t like resin printing terrain though, FDM is my go to for that job!

Amazing video. I could not fine a video about checking ones support and what programs you use (and/or have tested) for the job. It is a great idea with a ranking system for all creators.

Great video man, and hope that you are aware of the solar auxilia line too! If you like their not- conterparts the base ones from FW are still stellar.

Such a good video mate, I recently bought a Saturn 2, editing some content as we speak! I have learnt a few things from this video so thank you!