Thank you, your video helped me a lot in reassembling my Dyson v7 - the hatch was in the Close position and I couldn’t figure it out until I saw you demonstrating it!
@OpenMeUpTecАй бұрын
thanks for your support
@DoDayDemАй бұрын
Excellent demonstration and I’m a 73 year old woman.
@OpenMeUpTecАй бұрын
thanks for your support
@MrAndrewBers Жыл бұрын
Extremely useful! Wet dirt got into the vacuum while cleaning up during Hurricane Ian and created a "smells like dog" in my V8's interior. Purchased new external filters, but wasn't until I disassembled the interior and soaked (in Efferdent) that large chunks of congealed dirt came out. Video provides road map to take apart and put together as much as needed. Thanks!!
@OpenMeUpTec Жыл бұрын
thanks for your support
@kathernine64082 ай бұрын
Thanks for showing how to disassemble the filter, everyone else was using flat head screwdrivers and to pry up the edge, really denting up the plastic. I knew there had to be a better way
@OpenMeUpTec2 ай бұрын
thanks for your support
@julianweiser9985 Жыл бұрын
Without prying with a sharp metal object. Perfect. Nice job man!
@robhorner35043 жыл бұрын
Thank you, thank you, thank you! This was a simple to understand video with very clear steps. You saved my Dyson!
@OpenMeUpTec3 жыл бұрын
thanks for your support
@anony36153 жыл бұрын
@@OpenMeUpTec why does every sentence you say have an upward inflection, like it's a surprising question?
@anony36153 жыл бұрын
@@SausyGuyFinn it's an observation, not an attack, go be a snowflake somewhere else.
@adityapratap84772 жыл бұрын
Thanks heaps. I recently moved into a townhouse whose previous tenets had two dogs and the air coming out of my dyson v7 origin smelled like wet dog. Teared down the while thing gave it a good blast of air and wiped with disinfectant. Works like new and no smell.
@jondecker283 Жыл бұрын
Thank you! This helped me figure out the position of the little spring latch to help slide the canister assembly back in.
@johne60812 жыл бұрын
Very helpful and timely. I already know how to clean the prefilter and postfilter, but mine needs a deep gut cleaning.
@jugglematt100 Жыл бұрын
Thank you so much for taking the time to makethis video , soo helpful, no way i could have done it alone 👌
@kenm544311 ай бұрын
Thanks so much for this video. The card trick was awesome and with some difficulty, helped me to open up my heinous-smelling vacuum! I was ready to buy a new one but this video saved me quite a bit of money!
@OpenMeUpTec11 ай бұрын
thanks for your support
@KeoEthan Жыл бұрын
That's a pretty cool old school USMA shirt.
@OpenMeUpTec Жыл бұрын
it is just some top i was given. i actually dont know what it is
@joshuapage903 Жыл бұрын
The card trick is what I was missing, thanks for that! Although instead of a card a I cut a pieces of a plastic folder so it would be a little more structural. Great video
@OpenMeUpTec Жыл бұрын
thanks for your support
@mikecronin24152 жыл бұрын
Thanks for this! Good tear down video. Despite the “Animal” moniker, I find my Dyson can’t stand up to our three Bernese Mountain Dogs without a regular cleaning. This video was instrumental in keeping it going!
@OpenMeUpTec2 жыл бұрын
thanks for your support
@drjasonharrison Жыл бұрын
How to dissemble the bin to clean between the red gasket and the bin?
@Ecksterphono Жыл бұрын
Flexible guitar pics work good on the screen filter to get them off the ledges. Works wonders instead of jamming playing cards in there.
@luislopez61113 жыл бұрын
Thank you very much!No T6 screwdriver needed, just T10 and T8 for the whole process
@happygroomer Жыл бұрын
Very, very helpful! Thank you for a great video!
@OpenMeUpTec Жыл бұрын
thanks for your support
@popperchad10 ай бұрын
Excellent video! Thank you. 😊
@godfreyhiggins4300 Жыл бұрын
Excellent demonstration. Thanks
@OpenMeUpTec Жыл бұрын
thanks for your support
@marygfullerton Жыл бұрын
Video was awesome! Many thanks!
@dankerine Жыл бұрын
What about the inlet flap to the bin? Also there’s further deconstruction via the battery(just 3 screws and it comes out like a drill battery)
@istaff1242 жыл бұрын
thank I didn't remember how to put the seal and I find this video.helpful.....
@OpenMeUpTec2 жыл бұрын
thanks for your support
@markcullip806 Жыл бұрын
Thank you, very helpful. 👍
@MrChrisbarcelona2 жыл бұрын
Excellent thanks saved my Dyson
@OpenMeUpTec2 жыл бұрын
thanks for your support
@jeep291 Жыл бұрын
Wow thank You you are a good guide it helped me continue your good work...✌
@OpenMeUpTec Жыл бұрын
thanksfor your support
@samel6437 Жыл бұрын
How do I separate red ring from the container? Need to clean the area around grey flap that's inside of the grey bin spout. Two screws are out, but what do I do next? Seems stuck together...
@sergelocatelli66382 жыл бұрын
Thank's for your course, very clear well explain nothing else to say as thanks. Serge
@OpenMeUpTec2 жыл бұрын
thanks for your support
@Ichabod123 Жыл бұрын
Good detailed clean.
@OpenMeUpTec Жыл бұрын
thanks for your support
@Ichabod123 Жыл бұрын
@@OpenMeUpTec Thank you for the good work
@eli1921 Жыл бұрын
What torque sizes do we need? Also can I soak the inner core...after I was able to use the cards & remove the filter @8 minutes into your video... I wanted to clean it thoroughly but unsure if there is anything electrical to worry about...much obliged for your video & support GREAT ONE!
@OpenMeUpTec Жыл бұрын
you can clean everything beside the motor. the whole item at 5.00 in the video can be clean as it has not electric stuff
@David-fj5lz Жыл бұрын
Can you do a break-down of how the wiring sits in the motor-head
@VBBZ2 жыл бұрын
Great video!!
@OpenMeUpTec2 жыл бұрын
thanks for your support
@jamesduros99902 жыл бұрын
How do I disassemble down to the motor and PCB assembly?
@sirchambers6912 жыл бұрын
That's the part I need to see, I have a loose cable on the pcb
@MarioMario-bl1fu2 жыл бұрын
Great video thanks!
@ruddyv.1420 Жыл бұрын
F’ing awesome 👌🏽
@louised4452 Жыл бұрын
Is it possible to get the red (upper) ring off the dust catcher please? Ps your videos are superb!
@OpenMeUpTec Жыл бұрын
you can but i forgot to show that part
@Vazmenko3 жыл бұрын
Excellent, thanks.
@ar2uro7872 жыл бұрын
Nice video! But what about the cleaning of engine fan? The blue part of your dyson. In older version is simply but here i dont have any idea :(
@OpenMeUpTec2 жыл бұрын
there is really nothing else you need to clean besides what i show you in the video.
@ar2uro7872 жыл бұрын
@@OpenMeUpTec there is a foam filter. I find it and u can see it at this video kzfaq.info/get/bejne/hMx5irFhua_Lc4E.html
@MyKheBeach2 жыл бұрын
How do you remove air vent out purple part) ?
@OpenMeUpTec2 жыл бұрын
can you watch the video and tell me at what time you having issues with and what time the purple part shows up
@-MrMoose3 жыл бұрын
Anyone know where the black paper-like gasket (smaller than the red one, same material) goes?
@OpenMeUpTec3 жыл бұрын
can you watch the video and tell me at what time it shows up so i know what you are asking.
@-MrMoose3 жыл бұрын
@@OpenMeUpTec At 13:52, the part that's facing the camera -- in my Dyson V7, there's a black gasket that sits on top of that piece. Or at least I think that's where it goes. I didn't specifically see this gasket at any other point in your video. When I reassembled everything, the filter doesn't want to sit flush anymore.. seems like the gasket is causing it to be raise about 1MM up? I don't know where else it would go though.
@OpenMeUpTec3 жыл бұрын
@@-MrMoose it is best if you can disasseble it again and watch the video. as i am not certains what is the problem. can you take a picture of this peice or find it somewhere to show me what it is.
@-MrMoose3 жыл бұрын
@@OpenMeUpTec I'm pretty sure the piece doesn't exist in your video... it's made of the same material as the red gasket. I'm going to leave it alone for now, vacc seems to work fine and it's my backup anyway 😅 Thanks for the response!
@OpenMeUpTec3 жыл бұрын
@@-MrMoose i see
@steveypeppers93242 жыл бұрын
Sorry, but the inflection in the way that you speak make it sound like your asking a question at the end of each sentence.
@OpenMeUpTec2 жыл бұрын
thanks for your help i will look into it
@jaykink56342 жыл бұрын
Thanks for the video but your voice was well annoying
@OpenMeUpTec2 жыл бұрын
thanks for your support i will look into upgrading my voice when i get more funding