Good video, thank you for explaining 👍🏻

I’ve just started using the ST on my first coat. I’m still not sure about it but it’s definitely getting my first coat perfectly flat with a lot less strain.

great video once again

Just got one my self I agree because mine went off to quick needs to be wet not good at the min I well I will try it on the next lot

interesting stuff keep going

Once you get used to them it makes life easy I’m using a 900 I give it the sf blade 1st then the pf & finally the st s/s blade & it is 2nd to none ceilings is a must 👍

My local muck spreader uses something similar but only on straight runs, probably why the chieftan pushed all my cables out of his way causing some brown trouser moments.... Praise the lord for pen and paper measurements hey......

I struggled with it myself (1200) and I’m not a plasterer by trade but more a decorator who also plasters. I used it on a wall that in places was back to brick so because there was no issues of water ingress etc I used bonding and it worked great, was on a staircase with no scaffold or planks (just a ladder). In hindsight I’d have gotten a 900mm but i suppose going in at the deep end will work in the long run!

Everyone relies on these new speed skim and flex trowels but always solid trowel keep plaster flat

Keep it as flat a you can...can knock the skim dwn stright away with it on first coat so gives you more time m8

The speedskim sf is better than the st...

The 1200 is to big i found. Get the 900 sk much easier