⚫️ SUBSCRIBE to our channel ⚫️ bit.ly/3c5JveR Hit the thumbs up, and comment for more content like this!

This video was very helpful. Thanks.

Great tips! Just moved mine from a full face, to a new modular switching to the boom mic

Thank you. Easily managed it with your help.

How does the install differ for a helmet without a removable liner? I have a Shoei Quest, and the cheek pads come out, but not the liner. I'm also curious about the Slim as an option for this helmet.

I have just installed my Bold and I am finding that I have the opposite problem with the speakers sticking out too far into the helmet. After an hour ride, I was getting a pressure headache from the speakers. Is it safe to remove some of the helmet styrofoam to recess the speakers a bit? I own a LS2 Valiant modular helmet.

Thanks, very well tutorial

kind of dumb that it took me this long to figure out. For the flat plastic piece w/the femal headphone input, if you are using the adhesive, you need to remove the plastic clip. In order to remove the clip, you slide the plastic clip downward.(that was the part I was stuck on). They didn't show in the video. Go out and ride safe everyone!

I'm proud owner of Packtalk Bold. It is great, but one issue makes it uncomfortable to use. My iPhone is set to use Siri in Russian (all other menus are in English). Cardo is set fully in English (because Cardo's Russian sucks, sorry for that). Problem is: in such combination 'Privet Siri' does not work. Only if I set my Bold's menu to Russian 'Privet Siri' activates Siri in my iPhone. Is there a way to call Siri in Russian, while Bold is set to English?

Do you have an installation video/guide of Packtalk Black on Nolan N100-5?

3:34 sometimes it's easy. Sometimes it's like stressful

I wish you'd done an installation in a modular helmet like the HJC I90.

Hi, I am considering buying the bold model for my AGV K3 SV helmet, ML size. Are the two compatible? Because I am not able to find this specific combination anywhere mentioned. Thanks in advance for your reply.

Does the glue plate for the outside actually hold up to heat? The crap they gave with the Sena didn't hold very well.

in the last, half helmet, does the kit come with side pads for speakers or is it part of the helmet itself?

The vice commands don't work if you conect (in my case), to bmw tft. You also can't hear the other rider. May as well buy the cheapest comma unit you can find and don't conect the tft

I’m stuck! The cutout pockets for the speakers in my Neotec 2 aren’t deep enough to allow the speakers to seat far enough in so that they aren’t pressing hard on my ears. The speakers are about 1/8” wider than the tapered cutout to seat at the bottom. I took out the spacers and it didn’t help at all. I cannot afford to buy another $700.00 helmet and I cannot return the $500.00 Cardo unit because I’ve gone through the installation process. Any suggestions that doesn’t involve me spending another huge bunch of $$$?

can i install the packtalk black on a Ruby Fullface helmet? Theres no cheek removal part or any other inside removal part.

Thanks

Is the backplate of the original packtalk compatible with packtalk bold?

The Cardio update page gives me a 404 error every time. Tried using phone and laptop, same issue .Am I missing something? Thanks

I'm an extremely disappointed new customer. I have been unable to get the metal backet removed in order to use the adhesive mount, it simply refuses to budge. I followed your steps exactly. This is extremely frustrating

buen dia podrian subir instrucutivo de instalacion packtald bold para bmw system 7

Can you please do a video of an installation of the Bold on a Shoei Neotec 2?

for the HD pilot 2 in 1, there is no slot for speaker, how can i install?

Thank you

Does the Packtalk bold fit to a Scuberth C3 PRO helmet?

is it possible to remove the glue pad from the helmet? Maybe by heating up the plate area? I want to install a windjammer on the helmet, and therefore the cardo system must be removed.

PLEASE SHOW ME WHICH UNIT WILL WORK FOR A SCORPION COVERT

Is this compatible with the Ls2 valiant 2?

If you have an Arai Signet Q don't bother trying this system. There is no way you are going to get the cheek pads and neck roll back to wear it will fit. The Signet Q has no leeway in the design for the speakers and will not work at all.

unfortunately there were no alcohol pads inside the box

How about a modular helmet?

What about these damn wires

The mounting mechanism seems to be a bit flimsy for succ an expensive device. I wouldn't trust it. One wrong touch and the unit goes flying...

en español

Don't buy it. Its microphone like garbage and very bad! Its like police radio with always low volume. Im regret in order to buy it.

How incompetent is this company. Do you even watch your videos before posting? You have absolutely no sense of order, and you move back and forth randomly from helmet to helmet... Wtf