Part D - Mercruiser 4.3 (2) - Water in Oil (Nasty)

  Рет қаралды 12,982

Moccasin Marine LLC

Moccasin Marine LLC

3 жыл бұрын

In this video I have just removed the intake and valve covers to show the extent of the water in the oil. This engine had about 7 gallons total of water and oil mix inside. The customer reported that oil would actually puke out the top of the engine while running on the water.
EDIT: After viewing the damaged block videos in this series I think you can now see how so much water got into this engine. Every time the #3 piston was at the top of its bore water would dump into the crankcase through cracks in the bore.

Пікірлер: 11
@clutchboi4038
@clutchboi4038 10 ай бұрын
I'm putting a rebuilt one in a boat for a customer and the block was cracked and had to be replaced. It was full to the top of the dipstick with milky oil/water mix. I'm hoping that's the only way the water got in. It can get in from the exhaust manifolds as well I think.
@moccasinmarine
@moccasinmarine 10 ай бұрын
Very little water gets in from cracked exhaust manifolds. The water jackets on the exhaust and engine are separate. You are more likely to get bent connecting rods from hydro locking the engine with water leaking past the exhaust valves into the cylinder. The cylinder is sealed by the rings so not much water gets into the crankcase past the piston. It’s usually a crack in lifter valley or a cylinder below the piston.
@superwolf28
@superwolf28 2 жыл бұрын
Good vid! Where was the water coming in from?
@moccasinmarine
@moccasinmarine 2 жыл бұрын
You stopped watching too soon. Watch parts E and F.
@user-dz4du9xs7b
@user-dz4du9xs7b 8 ай бұрын
Hey I’m getting water in all cylinders what could cause that ?
@moccasinmarine
@moccasinmarine 8 ай бұрын
Exhaust manifolds cracked internally on both sides letting water back into the cylinders.
@user-dz4du9xs7b
@user-dz4du9xs7b 8 ай бұрын
@@moccasinmarine it is also missing the exhaust flappers maybe that can be why? . I will take manifolds off and test them.
@benspeakman2623
@benspeakman2623 11 ай бұрын
condensation mix? you mean f'in water
@moccasinmarine
@moccasinmarine 11 ай бұрын
No I mean condensation. There’s a difference. What’s with the hostility today? That’s two ingrates in a row.
@benspeakman2623
@benspeakman2623 11 ай бұрын
@@moccasinmarine ok i got a whole engine full of condensation then 😆
@moccasinmarine
@moccasinmarine 11 ай бұрын
Over time condensation can build up in marine engines from outdoor humidity. Marine engines run cold compared to cars and trucks and don’t burn off the condensation. So the “water” can come from built up condensation from infrequent use of the boat or it can be pumped in from the lake or ocean and get in the crankcase through a crack or other breach in the cooling system. So there is a difference in where the water comes from.
REVIEW: Everything Wrong With A Mercury Mercruiser
15:47
DEBOSS GARAGE
Рет қаралды 185 М.
Marine Exhaust Manifolds. How Do They Work?
12:42
Schneids15
Рет қаралды 313 М.
Please be kind🙏
00:34
ISSEI / いっせい
Рет қаралды 191 МЛН
ОДИН ДЕНЬ ИЗ ДЕТСТВА❤️ #shorts
00:59
BATEK_OFFICIAL
Рет қаралды 8 МЛН
Accused of not doing a valve job😤
18:49
Powell Machine Inc
Рет қаралды 1 МЛН
How to troubleshoot 3.0 litre with water in oil or milky oil
9:30
Maine Boat Guy
Рет қаралды 34 М.
Part 10 - Mercruiser 4.3 (2) - Intake Manifold Install
10:40
Moccasin Marine LLC
Рет қаралды 19 М.
6 Most Common Mercruiser Problems
3:18
BoatBuy
Рет қаралды 527 М.
Mercruiser 7.4 MPI Water in Oil
6:36
Luke Szari
Рет қаралды 29 М.
HOW TO FIX A SEIZED BOAT ENGINE
14:13
Last Chance Shop
Рет қаралды 25 М.
Honing For The Home Engine Builder
8:16
Uncle Tony's Garage
Рет қаралды 724 М.
Mercury MerCruiser V8 total removal & installation (How To)
30:38
Chef Outdoors
Рет қаралды 158 М.
2JZ 2000 сил! СКОЛЬКО СТОИТ? #shorts  #тюнинг #автотюнинг #2jz #TURBO
0:51
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 797 М.
РЕМОНТ ДОРОГ В ШВЕЙЦАРИИ
0:17
В ТРЕНДЕ
Рет қаралды 6 МЛН
Самое СЛОЖНОЕ оживление на канале!
52:54
Мастерская Синдиката
Рет қаралды 2,2 МЛН