Parts Washer Up Grades and Repairs

Рет қаралды 39,563

3 жыл бұрын

I made the parts washer portable, added a drain valve, replaced and upgraded the pump, and upgraded the hose by having 3 tubes by using Loc-Line products with adjustable on/off valves.
Amazon Affiliate
Loc-Line -Coolant Hose Total Flow Control Manifold amzn.to/3p82iOx
Loc-Line Coolant Hose Assembly Kit 7pcs amzn.to/2IjNQlo
Loc-Line Blue 1/4" 5 Foot Coil amzn.to/35eHwol
Loc-Line Coolant Hose Assembly Pliers amzn.to/2UcdLyd
Little Giant Submersible Parts Washer Pump
1/4 NPT Coupler, Male & Female amzn.to/32sOC73
Brass Barb Hose Fitting, 3/8-Inch Barb x 1/4-Inch NPT amzn.to/32veRtn
Tank Drain Valve 3/8 NPT amzn.to/3lf9VAe
3/8 NPT Tap amzn.to/3ldYadb
4 Wheeled Heavy Duty Furniture Dolly amzn.to/32sZTnK
DEWALT 20V MAX XR Impact Driver Kit, 3-Speed, 1/4-Inch amzn.to/2Ikzphl
Totally Awesome All Purpose Cleaner amzn.to/3JNH3uf
Donate to Help Support Channel www.paypal.com/cgi-bin/webscr...
Facebook / martinbuilt-2351766611...
Disclaimer:
FYI if you click any of the product links above and end up purchasing anything I MAY get paid a small commission at no extra charge. This is one of the ways you can support the channel. Your support helps me bring out more content for all of you. Martinbuilt assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Martinbuilt. Martinbuilt cannot guarantee against improper use or unauthorized modifications of this information.
#martinbuilt

Пікірлер: 96

@rickwatson1056 3 жыл бұрын

It agetates what ever you got in there to help break it loose.

@rodm5830 3 жыл бұрын

I agree.

@mikeburke8656 2 жыл бұрын

Agree

@mikeburke8656 2 жыл бұрын

@@rodm5830 the company i use to work for had a popt and pan washer "turbowash" that worked off the aggregation of the wash water. The air hose does the same thing. Especially if you want to soak a part. kzfaq.info/get/bejne/hKx5aLVenbfRlIE.html

@justinphillips5702 2 жыл бұрын

Exactly

@barrycriswell8967 Жыл бұрын

They have already said place part in and wash should be helpful with heat

@marioprzepiora 3 жыл бұрын

The air is there to break the surface tension on oil. Oil is lighter than water-based solvent. We use that in machine shops to prevent good bacteria (which requires air) from dying and rendering the solvent rancid.

@rogersprague563 2 жыл бұрын

The Air agitates the cleaning fluid ,and does help to clean when you just lay parts in tank. I used a fuel oil tank with an air line with 6 ft of copper line with small holes drilled in it and set a engine block in tank and turned on the air closed the lid and let it clean the block ,heads or whatever worked Great !

@martinbuilt 2 жыл бұрын

Thank you Roger for your tips. I appreciate your input.👍😊

@geostanley409 3 жыл бұрын

Thanks for the follow up on the awesome sauce! I believe I’ll drain the diesel fuel out of my vat and give it a try. And I never seen a vat with the agitator, but that’s a great idea! I might just have to make one for my own. I believe 1/4” copper tubing running straight across the front would do the trick.

@Biigluv 3 жыл бұрын

Looks Good, Great idea Martin

@martinbuilt 3 жыл бұрын

Glad you like it

@TheBbabody 3 жыл бұрын

Nice job on the parts washer. I use the loc line hose and fitting at work. They last a long time in an industrial application.

@martinbuilt 3 жыл бұрын

That's good to hear.

@traxxasxmaxx2834 11 ай бұрын

Super cool video.thanks 4 sharing all the awesome upgrades!

@martinbuilt 11 ай бұрын

Thank you for watching, and I'm glad you liked it and found it helpful..

@philliphall5198 Жыл бұрын

1/4 pvc pipe with a lot of holes and air regulator works great and it’s easy to remove and clean bottom of washer

@PaulCTownsend 3 жыл бұрын

Good job

@martinbuilt 3 жыл бұрын

Thanks

@quienmas5746 3 жыл бұрын

Love this channel 💯💯

@martinbuilt 3 жыл бұрын

Thank you!

@keithlarge1151 Жыл бұрын

I used crud cutter in my washer and kept the lid down when not in use and didnt have a high evaporating issue but it did after a few years corrode and caused a hole in the tank that I had to fix It did remove paint from some areas but not all

@dustinwarriner7432 3 жыл бұрын

You just gave me ideas for mine

@martinbuilt 3 жыл бұрын

glad you found it helpful

@stinger4583 Жыл бұрын

Very informative. I've got some good ideas. Thank you.

@martinbuilt Жыл бұрын

I'm glad you liked it and found it helpful thank you for watching.

@larryvena663 Ай бұрын

Good work 😊

@martinbuilt Ай бұрын

Thank you 😊

@reytech1786 Жыл бұрын

Amazing video, and you for taking the time and sharing your parts washer , I’m getting one now. I’m a subscriber

@martinbuilt Жыл бұрын

Thank you, I'm glad you liked it and found it helpful and thanks for subscribing I appreciate that.

@kirbyf7007 3 жыл бұрын

On other parts washers ive seen that air tube was placed just behind the screen, inside the pump box, so if it plugs up, you can clear it..

@peteosinga8845 Жыл бұрын

I used simple green didn’t use my washer for several years while sick when I opened the washer it was filled with hammerhead worms over 20. Freaked me out big time

@danhambrick6331 3 жыл бұрын

Nice job souping up your parts washer Martin....lol....

@martinbuilt 3 жыл бұрын

Thanks Dan, yep it's doing a great job.

@6jefes948 2 жыл бұрын

Great ideas! I’ll be implementing them. Have you thought about adding heat? Hot solvent cleans 100 times better. I found an instant water heater at a yard sale that I’m going to try.

@martinbuilt 2 жыл бұрын

I like the idea of adding an instant hot water heater.👍

@moonolyth 2 жыл бұрын

Great ideas, Love the "Awesome stuff" us it to clean my $60 sable brushes - removing dry paint and all sorts of other stuff. Building a wash station from stainless restaurant vegetable-steam-trays, (Goodwill $15!). Its a small cleaner 11 x 12. With two trays. One below holds liquid, filters, pump and heater like a fish/sump. The top tray is empty unless I plug it for a bath wash. Ill have a Thermal Control Switch. 50c/122f. ... 120f is about as hot as you need. These will control an Immersion Heater Voltage 300Watt. like coffee cup sized. Only using water based detergents in the system. Seal-All is a good glue for sealing wires it works well in fuel type liquids. Wish me luck

@martinbuilt 2 жыл бұрын

I'm glad you found the content helpful. Sounds like you got quite the cleaning rig yourself.

@moonolyth 2 жыл бұрын

@@martinbuilt whell, a work in progress any way.

@lintelle2382 Жыл бұрын

My HF drain plug is M14x1.5 threads

@shawn9913 2 жыл бұрын

What sizes are the nozzles you mentioned a 1/4 inch the othered look larger? By flow that is being shown

@Mastermike102105 3 жыл бұрын

Agitation. Almost like a ultrasonic cleaner

@Rick-he8vi 2 жыл бұрын

The air agitate's the fluid around the parts you have soaking, to help clean them faster without you touching them.

@martinbuilt 2 жыл бұрын

Thanks for clearing that up Rick 👍😊

@williamcarter4242 6 ай бұрын

The air coming out of that wand could be to agitate keep things moving, just a thought

@rourkemcgaffin5694 Жыл бұрын

If you watch some videos on ultrasonic cleaners bubbles will be explained in a much better way than I could explain it. Little tiny bubbles are used and apparently the mini explosions when they burst are very effective cleaners.

@danbramley1982 3 жыл бұрын

The aeration adds oxygen to the liquid. After oil builds (tramp oil) it grow bacteria and begins to stink. Aeration keeps the bacteria from growing. I run a fish tank aerator in my CNC mill coolant.

@martinbuilt 3 жыл бұрын

Dan, thank you for solving that mystery

@LikeASimpleLife 4 ай бұрын

The air is like boiling a part. You can put a part in the washer and let the cleaner do the work but the air moves the cleaner around making it work better.... I have a 5-gallon bucket with an air stone from a fish tank, this works get for cleaning parts with small crevices

@martinbuilt 4 ай бұрын

Thank you appreciate the suggestions I'm going to try the fish tank AirStone that's a great idea.

@CrackHeadOnDummiss Жыл бұрын

The air is to help agitate your solution, thus helping your pump from getting clogged, if you point it at your pump inlet.

@petefeyen2146 2 жыл бұрын

Its a bubbler for soaking parts

@joeshmoe5935 3 жыл бұрын

Not just agitation. Also, if you have some solvent in there water based that can develop bacteria. Air bubbles introduced in there will stop the anaerobic bacteria from developing which can become extremely acidic.

@martinbuilt 3 жыл бұрын

That is the best thing I have heard so far on what that is for.

@rawwetzel Жыл бұрын

I put the purple cleaner in my parts washer it took the paint off and ate the pump. You have to add water to it. It will keep eating the pump.

@martinbuilt Жыл бұрын

Yeah purple power and super clean are somewhat acidic. Totally Awesome will also remove the paint but so far it has not affected this pump I installed.

@randybichsel4244 3 ай бұрын

You should have put the Bottom shelf on upside down so it would have had a Lip on it to keep crap from rolling off..

@mrjameschong 2 жыл бұрын

since the paint fell off ... why not try nickel or galvanize it ??? here on youtube there are many videos about it ... my curiosity really kills me and yes, I bought one, I would like to. Oooohhhh ... the "4.0 Liter, high output" Jeep logo !!!! years without seeing any of that !!! Here the first generation jeep cherokee used it as well as the first generation wrangler

@JohnnyHotspurGT 3 жыл бұрын

Good morning Martin ! I believe the air inlet is just to agitate the chemical to clean better. I am also thinking, but could be wrong, doesn't that parts box fit where the air inlet is, so the air will agitate the chemical in the box, is there a hole in the parts box to insert the air tube into it ?

@durangodave Жыл бұрын

maybe its a dryer or allows you to blow out places you cant reach if u add a hose to it

@stevenbarts330 Жыл бұрын

Petcock cockpit is in a plane or boat where the cockswain works

@reallybigfooted 3 жыл бұрын

Aeration. keeps the chemical flowing

@hlspringston Жыл бұрын

Love the mods. Do you dilute the totally awsome? If yes, what ratio is the best?

@martinbuilt Жыл бұрын

Thank you I appreciate that. I went full strength with the totally awesome

@georgecampos7119 3 жыл бұрын

I guess the air and bubbles will make parts more clean almost like washing machine lol

@martinbuilt 3 жыл бұрын

bubble bath for engine parts...lol

@luiscruz-no3ib 3 жыл бұрын

The difference on the thread is istead of npt is mpt is a metric 3/8 pipe treads

@martinbuilt 3 жыл бұрын

Oh, is that what it is, thanks for the info

@luiscruz-no3ib 3 жыл бұрын

Glad to help

@andyjohn5272 3 жыл бұрын

Paint comes off, the original hose leaks (which probably has a plastic tube inside) and the plastic in the pump cracks. I'm guessing a common theme here. Perhaps the cleaning solvent you are using attacks some plastics? The label says concentrated - did you dilute it? If not, maybe that may help.

@martinbuilt 3 жыл бұрын

The pump had the problem before I started using Totally Awesome. Totally Awesome did cause the paint to come off.

@billbrewer785 2 күн бұрын

What ratio did you mix the totally awesome

@martinbuilt Күн бұрын

I actually went 100% totally awesome.

@tonyversus9787 Жыл бұрын

This might sound stupid but could you use Evaporust in a parts washer sink? I leave parts submerged in Evaporust for weeks at a time with no ill effect whatsoever.

@martinbuilt Жыл бұрын

I personally have never heard of it but looked it up I'll have to give it a try.

@10camarors 3 жыл бұрын

Great video Martin...now, I purchased the Little Giant pump. I'm not an electrician but the new pump has a Blue, Brown and Green/yellow wire. Where do these wires connect to the old Black, White and Green wires. Which ones go with each other? Thanks in advance!!

@martinbuilt 3 жыл бұрын

Thank you, I appreciate that. The brown to black, white to blue, and green to green/yellow

@nuttzandboltzgarage1946 2 жыл бұрын

Blue brown and green/yellow are for 240v connections not 120v. So if you did hook it up to 120v and it does not work well / or slow it’s because the pump is only running half power. Not too good I would think but I’m just a licensed plumber not Electrican……

@bustertaco 2 жыл бұрын

What do you mean 'hammer on keys?'

@klinkster1955 Жыл бұрын

Maybe I'm old school, but I can't imagine any water based degreaser being as effective as mineral based solvent

@hedzrtailz9994 Жыл бұрын

It's slower for sure, but it's cheaper, more environmentally friendly and doesn't evaporate as quickly. Just as effective tho

@dzlfreek 3 жыл бұрын

BUBBLES!

@martinbuilt 3 жыл бұрын

bubble bath for engine parts

@xxsilverxxfox5153 3 жыл бұрын

If not an agitator, it may be a simple drain. Do you have a drain currently?

@martinbuilt 3 жыл бұрын

Yes it has a drain.

@guygowanloch5221 2 жыл бұрын

I went to buy a 20 gallon parts washer today, and the fella sold me "gunwash" to fill it... Not having a clue what I am doing, I bought it. Brought that shiny thing home, tore into the box, assembled everything, and put two five gallon pails of this stuff in there.... That stuff just smells flammable, and I was concerned about plugging the unit in. So I flipped open the manual and on the last page, it says use water-based cleaning solution only. Do not use anything flammable. I look across the garage at the two empty cans of gun wash, and notice a giant flame symbol on the sides.... Needless to say, I haven't plugged anything in, I closed the lid and went and got my fire extinguisher. Can anybody tell me exactly how screwed I am?

@martinbuilt 2 жыл бұрын

How about just removing the gun wash and replacing it with the proper parts washing fluid. I think you'll be just fine.

@guygowanloch5221 2 жыл бұрын

I am struggling to discover an answer on the internet for the following three questions: 1. Is gun wash an effective solvent for cleaning engine parts, specifically in a parts cleaner? Seems to me, the answer here, is a resounding no. Gunwash is used for all sorts of things, but there is not a shred of information on the internet associating it with an automotive parts washer. 2. Will gun wash destroy the pump, or has it already shortened the life of the internal workings of the pump? 3. I feel like the store grossly misinformed me, potentially burning my garage down. Should I just take everything back and politely ask for a refund?

@guygowanloch5221 2 жыл бұрын

@@martinbuilt I have no idea what "parts washing fluid" you are referring to, because I've discovered a billion different "recipes" on the web. That's why I went to a store that sells both the washer AND solvent, but the idiots there gave me the wrong stuff. It completely dissolved the plastic on the pump assembly... turned it into grey jello....

@martinbuilt 2 жыл бұрын

@@guygowanloch5221 This is the stuff I have been using amzn.to/3JNH3uf