How To Frame A Basic Door Opening / DIY

Рет қаралды 149,958

9 ай бұрын

In this video, we are building a basic rough door opening! #diy #framing #howto
How To Frame A Stud Wall: • How To Frame A Basic S...
SHOP HERE:
Dewalt Framing Nail Gun: amzn.to/3FPkYKe
Circular Saw: amzn.to/3N9ddlR
Speed Square: amzn.to/3UkIuGt
Tape Measure: amzn.to/3SWaBdG
Chalk Line: amzn.to/3Nog5gh
Framing Hammer: amzn.to/3zz1skz
Level: amzn.to/3TYapMz
Saw Horses: amzn.to/3Dzovgu
Amazon: amzn.to/3KPE6eD
Walmart: bit.ly/3BB0sOp
Northern Tool: bit.ly/3u7C6Zg
RealTruck: imp.i128439.net/WDeM3A
________________________________
OTHER TOOLS:
Kobalt 10in Miter Saw: amzn.to/3ezSFEi
Other Miter Saws: amzn.to/3eBMxLX
Skil Table Saw: amzn.to/2W0ZoRt
Other Table Saws: amzn.to/3rZZMMb
Circular Saw: amzn.to/3N9ddlR
Skil Router Table: amzn.to/3r9bkNW
Jointer: amzn.to/3R4yEbj
Planer: amzn.to/3H9e4ls
Skil Router: amzn.to/33SGq3U
Wen Track Saw: amzn.to/3BfTCM5
Track Saw Track: amzn.to/3kuScHw
Drill/Driver Set: amzn.to/3kw0ezT
Brad Nailer: amzn.to/3lgznHM
Dewalt Framing Nail Gun: amzn.to/3FPkYKe
Drill Press: amzn.to/3odD01x
Band Saw: amzn.to/3TKzKZh
Jig Saw: amzn.to/3G1cmzT
Orbital Sander: amzn.to/3kzktwt
Belt/Spindle Sanders: amzn.to/308z4HG
Shop Vac: amzn.to/2UpolW8
Dustright Dust Separator: amzn.to/3rmzvHq
Duststopper Bucket Separator: amzn.to/3kFIPVq
Clamps: amzn.to/3EGP7Om
Wood Glue: amzn.to/3k93vE7
Kreg Tools: amzn.to/3NgbefC
Follow Us on:
Facebook: / patriotdiy
Instagram: @PatriotDIY
Etsy: etsy.com/shop/PatriotDIY
PatriotDIYWoodworking.com
Thanks For Watching! Please Like, Share, and Subscribe!

Пікірлер: 52

@parisrilveria1365 Күн бұрын

Great video and easy to understand. Keep on doing a great job.

@alanlane3869 8 ай бұрын

The marking, the way you laid them out, is something I haven’t seen in other similar videos. That’s a big help. Thanks.

@brandenbrown6011 4 ай бұрын

Thank you for the measurements! Nobody else explained it like.this

@shakejuntxcvi2590 9 күн бұрын

Thank you for this amazing explanation! Gave me the confidence to frame my own door without any hesitation

@jimlofaro5695 2 ай бұрын

so simple, so efficient. well done better than other videos by a lot. Thank you !!

@NewtSplinter Ай бұрын

This was really easy to follow and super helpful! Thanks!

@So98902 2 күн бұрын

so crazy that as a flooring guy I've had to contact the guy running the shit and tell them it's not framed right lmao. I've had to do that with electrical and plumbing too all the time. like it's basic shit.

@taleemkhan4779 4 ай бұрын

Great stuff. Verry helpful and to the point

@gabmarzen1125 5 ай бұрын

Straight to the point 😎

@skycleanairmoldwaterremova262 6 ай бұрын

I like how you explain the process with the proper names and methods. Great!

@PatriotDIY 6 ай бұрын

Thanks

@user-jv5qk9kz5g 8 ай бұрын

Wow, very easily explained so even I can understand! Loved how you laid it all out and described everything done. Thanks!!

@stanleyvo5198 6 ай бұрын

Very nice explanation …❤ 😊

@alvinsaulsberry398 Ай бұрын

Cool how you cut the bottom out last to keep the Wall intact 👍

@manuel12888 4 ай бұрын

Thank you

@BrentIraEnman Ай бұрын

Good stuff!

@sixehs 3 ай бұрын

Good explanation thank you

@octomo5564 2 ай бұрын

Great video

@williamkruz 6 ай бұрын

good explaination

@tomc8930 9 күн бұрын

Nice vodeo

@Johnshackles 4 ай бұрын

I like to sandwich a piece of 1/2 in plywood or osb makes it 3 1/2 by 3 1/2 then turn on end doubles the header strength.

@PatriotDIY 4 ай бұрын

Yea, I mentioned that in the video as another (stronger) option. Just wasn't necessary for this build

@gregmize01 9 ай бұрын

Looks awesome! Where is this btw?

@waybackj Ай бұрын

Would this all be the same for the door on a garage outside wall?

@royalkreationz 4 ай бұрын

Is this for a prehung door?

@teburt4332 6 ай бұрын

Okay, got that. Questions. I'm building a greenhouse on a concrete pad (not strictly level/pre-existing on property) in a lead-to shed configuration. Since the base plate is glued down (liquid nails - concrete not good enough to drill a hole and not crack) and staying, do I still make the height of the frame 2.5" taller than door? I was not clear that dimension would remain fixed with NOT removing base. (Also, I use star-head screws, not nails. I'm 80 and doing this on my own.)

@user-pm5km1cm1i 5 ай бұрын

if you are not cutting the bottom of the doorway to be open you will still need the 2.5" gap at the top The extra space is for when you hang the door, so you can adjust for square if you do not frame the opening big enough, you will cause yourself more headaches when framing the door up

@straplyfedj 7 ай бұрын

Im in carpentry school right now and we are using screws instead of nails

@politerudeboi6898 7 ай бұрын

good for tacking but nails dont snap like screws they bend its good to use both imo

@melvinchavez3117 Ай бұрын

I live in Massachusetts, I have always liked construction work and I would like to become a professional in working and learning with you if the opportunity arises.

@Ka_Gg 4 ай бұрын

Thanks for the video. When you were making the wall and nailing all the 2x4s, you didn't have to make sure they were level? Or you just worry about that when you flip the whole thing up in place?

@PatriotDIY 4 ай бұрын

As long as the stud spacing and measurements are correct you don't need to worry about weather it's plum or level until you stand it up

@Ka_Gg 4 ай бұрын

@@PatriotDIY awesome thanks! Also I'm terms of framing I saw ppl mention 3" nails but all the nailers I see use 2 1/4 nails?

@curlyelp7530 2 ай бұрын

Hey , enjoying your videos. On this framing of the door, rough opening, is their a "minimum" spacing from the adjacent wall. How close can we move that door to the wall closest to it? Thank You , appreciate it.

@2soon521 8 күн бұрын

In my experience every door way I’ve encountered and the ones I’ve done leave about 2 to 4 inches from the wall before you put your king stud that way when you hang your door the door knob isn’t in the way and you can open the door a full 90 degrees

@curlyelp7530 8 күн бұрын

@@2soon521 OK, Thank You, 4" it is. GOD Bless !!!

@NMcCauley 8 ай бұрын

Can I use screws instead of nails to frame a wall (non-load)… ?

@PatriotDIY 8 ай бұрын

Yep!!

@jennsappalachianden 7 ай бұрын

So, if my opening on my door frame is 37 and a quarter, does that mean I did it wrong for a 36” door that’s pre-hung?

@PatriotDIY 7 ай бұрын

Usually you would add 2"

@bluegorillacookies 4 ай бұрын

at 6:20, I think you shouldve overlaped the top plate from one wall to the other at the corner.

@PatriotDIY 4 ай бұрын

Yea! You are right!!

@swirling5418 4 ай бұрын

You never squared the wall while on the floor. How'd you square it?

@PatriotDIY 4 ай бұрын

Put a level on it after you stand it up to plumb it up before securing it in place

@CrazyGoat-iy1qi 3 ай бұрын

Muy rápido el video, no explicas las medidas de separación de la madera, nada, solamente armas el frame y ya.🤔🤔🤔🤔🙄🙄🙄🙄

@user-kb2yy4gv9d 5 ай бұрын

didnt specify measurement on all the studs and what they should be generally.

@PatriotDIY 5 ай бұрын

Because that would depend on the height you need for your space....if I give you measurements for my project, it will not help you.

@jeremiahbishopiii2245 4 ай бұрын

0:13

@knoxirving377 Ай бұрын

When measuring for the rough cut door opening , do you factor in the inch and a half 2x4 on the bottom or measuring from the ground for the length?

@PatriotDIY Ай бұрын

Measure from the floor, the bottom 2x4 will be cut away