Building My Own Home Office 10

Рет қаралды 158,496

Күн бұрын

To get a 1 year supply of Vitamin D + 5 individual travel packs FREE with your first purchase, go to drinkag1.com/perkinsbrothers
Thanks again to AG1 for sponsoring this video!
Join Erik, Jaime, and the Crew as they build a home office addition at Erik’s house. This room is being constructed under the existing waterproof deck and will be a multi-video series following the progress until the finish!
Buy the Tool Belt we designed and wear!
perkinsbuilderbelt.com/
Slim... Lightweight... Comfortable... Carries all the tools you need!
Attention Pros!
Get your exclusive SashcoPro Sample kit now. Enhance your craftsmanship with high-performance sealants. Claim here: www.sashco.com/perkins-brothers/
Subscribe to Building Jays Way (Jason from our Crew!)
/ @building_jays_way
Get amazing deals on HARDWARE, FIXTURES and TOOLS at:
perkinsdeals.com
Get a 15% discount on ALL of the Truewerk gear we wear With their Pro Deals:
truewerk.com/pages/the-truewe...
Check out Zip System
www.huberwood.com/
Learn more about us at:
www.perkinsbuilderbrothers.com/
Learn more about the RSS and R4 screws
www.grkfasteners.com/
You can visit Bryson City and stay in a House WE BUILT! Link below (has all of Jaime's Rentals):
airbnb.com/h/plotthouse
brysoncityfarmhouses.com
#building
#construction
#huberpartner

Пікірлер: 267

@PerkinsBuilderBrothers 16 күн бұрын

To get a 1 year supply of Vitamin D + 5 individual travel packs FREE with your first purchase, go to drinkag1.com/perkinsbrothers Thanks again to AG1 for sponsoring this video!

@paulellis84 16 күн бұрын

70 likes in 2 minutes is crazy

@BenKiefer 16 күн бұрын

The constant interruption to carry more boards in was hilarious; though I'm sure it wasn't in the moment.

@sterlingodeaghaidh5086 15 күн бұрын

Oh no, they did it on purpose, they joke like that.

@jxchamb 12 күн бұрын

I'm not a builder or a handyman or even handy. But even I know that that tool belt is a thing of beauty.

@doenisroose2174 16 күн бұрын

I love this Running gag while Jamie is Talking 😂❤

@mojotarvin5370 16 күн бұрын

That was a nice trick Jaime pulled to get a new tool belt! 😎

@ravenyangwenda368 16 күн бұрын

He gave his own to a subscriber if I'm not wrong

@stephane8993 16 күн бұрын

Jamie, a door and explanations with board traffic... It was hilarious. 😆 😂🤣

@masterfabricator 16 күн бұрын

ANNOYING

@Peaches1393 15 күн бұрын

Almost a whole video of Jamie talking and teach us stuff?! YES!!

@migueltor6434 15 күн бұрын

Now that is a generous 🧍‍♂️ man.

@GM-oq6nb 16 күн бұрын

Pro TIP---when getting the tongue of the tongue and groove ceiling planks to go into the groove----use a small scrap block of the plank to hammer against instead of directly hammering the previous plank tonge or groove. Pushing on it with the heel of your hands or hammering directly onto the finished board doesn't work too well and often damages the tongue. Using the block between the hammer and the finished installed plank makes the new plank glide right into place and forms a tight even fit seam.

@Chapz666 16 күн бұрын

My thoughts exactly. Was just checking if someone else made this comment already 😅

@jacp92 15 күн бұрын

Ditto, otherwise you can damage the edge.

@richardneel6953 15 күн бұрын

The space is going to look fantastic guys. Great design and loving the look. Can't wait to see it finished.

@kiergsmith 16 күн бұрын

Former Canadian soldier here, that tool belt is giving me serious flashbacks to the '82 pattern web belts I wore for a decade. Mind you, you can carry about 50 lbs of stuff around, which is handy.

@crashingstoans7907 16 күн бұрын

I think I saw Red Green with a tool bucket like Jaime's.

@azharmeghani1428 16 күн бұрын

Nothing beats the feeling of waking up on a Sunday morning to your renovation videos while having breakfast 😆

@kellycarrier1516 16 күн бұрын

We look forward to Thursdays and Sundays. Those Perkins boys and team are fun and educating to watch. We think Jaime should make a metal PBB logo for that beautiful entry wall 👍🏻

@LarryStrawson 16 күн бұрын

As a former carpenter the tool belt setup was cool! Nice to see the thought process for the different tool storage. I agree with all the updates especially the removable screw pocket and the hammer angle.

@buterdhams 16 күн бұрын

I loved the Jaime explanation today. Soo much knowledge! Also I WAS DYING OF LAUGHTER when Eric keep walking by and poked his head in the window !!!!😂😂😂😂😂. That’s was the funniest thing.

@tmoss7122 16 күн бұрын

I look forward to every new video! Thank you for putting in all the extra effort and time it takes to film and edit your projects!

@T.E.P. 16 күн бұрын

5 STARS ⭐️ Another stellar video Very funny too

@PerkinsBuilderBrothers 16 күн бұрын

thanks bro!!

@albertorozco5981 16 күн бұрын

That office is coming out fabulous. Very nice guys.

@Ghost-Mama 16 күн бұрын

Eric is a Spiritual transformer 🤍 . He’s constantly ascending, changing, and moving forward. His Soul continues to Elevate and Light his path to help light 💡 the path for others. Thank you 🙏🏻 Eric!! We see your change’s and how you are a continuous role model for others 😁💚

@frdmbe9258 16 күн бұрын

Perfect Ghost-Mama, back at you dear heart.

@Ghost-Mama 16 күн бұрын

@@frdmbe9258 and… thank you ☺️

@KevwePatani 15 күн бұрын

Amen! Praise God! 😆

@leann4925 15 күн бұрын

Enjoyed watching and do like the celling. Thanks!

@contento66 16 күн бұрын

God as my witness, Jamie Perkins has NEVER denied himself the pleasure of planing!!!

@jaymartinez7654 16 күн бұрын

Just love watching you guys work! What a crew ❤

@marymigliore3396 16 күн бұрын

The office is coming along nicely !! I LOVE YOU ALL !!!!!!!!

@matthewson1000 16 күн бұрын

Jaime that new truck is SWEEEEET!

@theresateegarden9147 16 күн бұрын

Your dog is beautiful!

@debby8428 16 күн бұрын

I know! Both of his dogs are so cute!

@cornerliston 16 күн бұрын

‘Pro tip’: sharpening the handplane blade. Gives you both a job made done easier, and much more fun to work with.

@holycitysilver5775 16 күн бұрын

Perkins Builder Bucket! We need it! 😂

@AndrewChambersDesign 16 күн бұрын

Jamies passion makes me want to quit my desk job and get into woodworking full time.

@CNCBuddy 16 күн бұрын

I'm looking forward to Perkins Builder Bucket Tool Belt.

@marksovulewski 4 күн бұрын

You guys have good pro tips. I'm a retired Carpenter/contractor and I have a few for you. Number one the sawzall try flipping the blade upside down once you get used to it you'll never go back. Number two when setting next to your doors that require a jamming extension remove the brick mold and set the jams to the interior so the hinges are free. Number three, jigsaw when cutting material do it from the back side and you can always see the blade and it doesn't fur the material. From Mark

@milesharlan1 16 күн бұрын

Hey guys, thank you for another Sunday afternoon video!! KUTGW

@BoudicasQuest 16 күн бұрын

Car Talk once addressed how to adjust your mirrors: to eliminate your blind spot, adjust each mirror outward until you can't see your own car, at all. It takes a bit of getting used to, but I swear by this. It literally eliminated my blind spots. I look forward to all your new videos. The camaraderie of your whole team is great to watch-I let myself feel a little like I'm there with you. Keep up the great work, production values, explanations, and problem solving-with a soupçon of hijinks ~ LOL the bit where Jaime is planing the trim behind the door while Eric tries to get in the frame via looking through the window was exactly the kind of thing I mean when I mention camaraderie. A happy team is a fun team!

@charlesjordan8511 16 күн бұрын

ceiling looks awesome.

@Supremacy5k 16 күн бұрын

It really warms my heart, to see how happy your dog is to see everybody, and just wants to say hi. :) Love your channel!

@PerkinsBuilderBrothers 16 күн бұрын

Thank you so much!

@fuegoman45 16 күн бұрын

Love the doggo 🤙❤️

@michaelsparks6084 16 күн бұрын

Brilliant strategy on how to get a NEW Tool Belt Jaime!😅

@jefftabor595 16 күн бұрын

Fun video!

@MrThuggery 16 күн бұрын

That was hilarious!

@tannerevans3056 16 күн бұрын

Love the tongue and groove, love the bucket belt, too! Truly innovative. Also, HOT TIP, those bora sawhorses have little holes in them so you can screw on sacrificial 2x4 tops on them. Has saved many a saw blade kerf through my set of them. And you don’t have to lift material when sawing past the horse. Rock on!

@TheDirtyBirchTrails 16 күн бұрын

I had the exact same truck as that Chevy 2500 right down to the tires. Sold it about 17 years ago !!

@ShadowBeats1 15 күн бұрын

Erick: “Jamie’s setting up his new tool belt” The toolbelt: yes

@dawnc1419 11 күн бұрын

Hubba hubba Jamie 😍🤤 lookin' buff and smokin' ❤

@HyakuJuu01300 16 күн бұрын

Nice work as always!

@caveweta 16 күн бұрын

Love the Scott Brown Carpentry outro music, very mellow!

@some0ne8 16 күн бұрын

Good morning!

@user-uh8bx6tg5r 16 күн бұрын

We drove through Bryson City on the way home from vacation yesterday. Thought of you guys and wished I had time to stop and meet you guys. Love watching your videos! Charlie from Vicksburg, MS.

@jamespppyacek342 16 күн бұрын

I've done many extension jambs. A reveal is the professional way to do them. If you can't hide it, make it a feature.

@jamesbeach2287 16 күн бұрын

Love the belts

@boompa8267 16 күн бұрын

Another great video. Can't wait for the next home build.

@jamespppyacek342 16 күн бұрын

When I was 23 I bought a tool belt that I mostly liked and added stuff so that it was the perfect belt for me. It was leather, so I bought some leather, and an awl and went to town: Tape and square and nail sets and cat's paw and flat bar on the left; Hammer, pencils, chisel, utility knife pliers and screwdriver on the right side. My first job was on a speed framing crew in Colorado. I could pull my tape and pencil at the same time, then drop my tape back in while pulling out my square with one motion to mark the line... IF it was a 2x6 or larger, otherwise just drop the guard-less Skil saw right onto the line to eyeball a square cut. Very fast, and pretty dang accurate. Also dangerous. But hey, I needed the work. Later I added a back pocket for a water bottle, and a wrench holster, and a battery drill hook on the right front. I had a wide padded belt with no suspenders and BAM! Ready to rock. Dang thing was stolen out of my truck 15 years later. Fkn-A. I've never been able to replicate that belt.

@AlwaysSearching.. 15 күн бұрын

Tip- cut a piece of scrap of the tongue and groove and have it in your nail bag, cut the tongue off of it and put the groove over the installed tongue length then you can hit that as hard as you want without damaging the tongue making it more difficult when trying to install the next length 👍🏼

@Bef090 16 күн бұрын

The tongue and groove ceiling looks amazing!

@Prariedog 16 күн бұрын

That cieling will darken over time ,enjoy it .🎉🎉🎉 great video guys 🎉🎉

@coffeeandteablogs2474 16 күн бұрын

Good Sunday 🤗

@Kristina_Australia 15 күн бұрын

That info on the door trim was very interesting as I have something very similar I have been looking at but delaying to do, so thank you. Love the ceiling 👏👍

@carguy1312 5 күн бұрын

Pro tip: at about 3:16 you’re having to skip over the sawhorse and move the board. Mine have screw holes so you can attach scraps to the top to be sacrificial. Idk - maybe real builders don’t need hacks like that, but I think I’ve saved a few for the swear jar…

@1023Blessed 16 күн бұрын

Beautiful work and love to see you all enjoying each other and having fun doing awesome work. Thank you for sharing ❤

@PerkinsBuilderBrothers 16 күн бұрын

Our pleasure!

@54mgtf22 16 күн бұрын

Love your work 👍

@giovannifiorentino8947 10 күн бұрын

Erick, you may consider sending a tool belt to Keith at Sailing Zatara to see how well it apply to sailboat works.

@emmanuelvincent6107 16 күн бұрын

Oh my gosh when Erik showed up staring through the door’s window at Jaime wanting to come in I busted out laughing 😅

@joeshmoe8912 16 күн бұрын

Same!

@danzimmer95 16 күн бұрын

That’s a good caulking/shimming tip.

@verygoodboy2688 16 күн бұрын

Happy Sunday friends

@marciam6224 7 күн бұрын

We miss you Arlo!! Jaime, I can't believe it took you 40 years to come to your senses and drive a CHEVY!! lolol

@KevinPenman93 16 күн бұрын

Usually use the foam as I’m fitting the jam as it grips the back of it and the trim holds the front and keeps it all solid, love the videos!!

@tmorgan7939 16 күн бұрын

Stencil PERKINS BROTHERS on that pail and you are all set ! With 2 yards of paracord you could sell a bunch of them on your website 😄

@zebkeith-hardy5491 15 күн бұрын

Just a suggestion to cut yourselves a little beater block that is the groove side of the boards to hit the boards in rather than hitting the tongue! Makes it a bit easier in my opinion because you do not risk damaging the tongue with your hammer. Love the videos!

@Agsteamer 15 күн бұрын

Eric. If you line up the four spanner wrench holes on the cutting disc with the cross hairs, your hole will be dead nuts where you want it.

@williamsanders6092 16 күн бұрын

I hope that new office work area allows you to be more efficient and spend more quality time with your family.

@bradvanbakel5781 15 күн бұрын

I resided (new weatherboards) an external wall of my 110 year old villa over the weekend. I have never done any DIY before, managed to get it done and even had a few plunge cuts to do, and no lie, the plunge cut tutorial Eric did 4+ years ago got me through it with no screw ups. Many thanks

@silys5253 16 күн бұрын

Haha. Eric and his board 😂

@michaelc.3812 16 күн бұрын

Sundays and Tuesdays are days I look forward to as they are the Perkins BB post days!

@dawncaulder2837 16 күн бұрын

Loving the look of your home office Erik~Great job guys~Have a Blessed Sunday😁😁

@albertorozco5981 16 күн бұрын

Thats was an awesome gesture giving a fan your toolbelt Jamie.

@garyrizzolo866 16 күн бұрын

Go Jamie😊

@wno1043 16 күн бұрын

I made my own shiplap for our kitchen ceiling from 1/2" plywood using my table saw and dado blade to cut the rabbet on opposite sides. Spaced the boards using a penny between each one. We painted the boards with a watered down white to try to achieve a washed finish. It came out pretty nice. Your ceiling looks great!

@jacksonspectacular 15 күн бұрын

We use a lot of those disc/puck lights and we have found a 4 1/4” hole saw does an almost perfect job. The extra 1/4” allowed for the extra space the hinges need. All you need to know is the center of the light, and there you go!

@debraimmer260 16 күн бұрын

You guys crack me up

@bradleymcmeen9629 15 күн бұрын

Just so you know when you add a jam extension to a door like that, you take off the stucco or brick molding and put the jam extension between the brick molding and the door jam and that leaves the door jam flush with the inside of the drywall for your casing, and then it will allow the door to open without binding on the jam

@user-dr2pg8fk2i 15 күн бұрын

For ship lap or any long wood joint, always keep a white rubber mallet around. Never use a metal hammer.

@ChrisLoganToronto 16 күн бұрын

Hey Jerry, thanks for the tool belt! So this is the youtubes you were telling everyone about. I didn't know it was about building stuff, sounded more like a OnlyFans. I just overheard you were hammering your brother's (office) with your two buddies the bearded man and Florida Man. Good luck

@tracymankey9314 16 күн бұрын

Jon o is amazing carpenter

@rhondakennedy819 16 күн бұрын

I always wondered why they called it a square with a lot of stuff on it. I have learned quite a lot from these men.

@marcusriley7309 16 күн бұрын

The key to a cleaner foam job is to leave it till it hardens. Even if it's on wood or drywall. Comes right off after it's set. Except your hair. Don't ask me how I know.

@ndothager 16 күн бұрын

Great info on the door jab extensions. Thanks!

@AugustoDiaz-jv4ov 16 күн бұрын

Nice to see this team working and same time little bit funny time

@debby8428 16 күн бұрын

I am enjoying this project very much. My husband and I are very curious about the tile sheets you will be putting around the tub. So happy to see the fur babies! What is your darker colored dogs name?

@briangrammer898 16 күн бұрын

❤❤Great Video ❤❤ I really enjoyed the info about the tool belt.❤ also thanks for laughs I really enjoyed Perkins brothers messing with each other ❤ I miss Arlo ❤ I know he is living life large. I hope one day he will just show up and hang out ❤

@ibowyer 16 күн бұрын

Crazy idea here… If you put a magnet at the bottom of the chisel holder would it hold it there?

@Doogle81 13 күн бұрын

Hahahah "excuse me" gag was great!

@Beandiptheredneck 16 күн бұрын

Alright I'll give you this, that hammer sleeve is brilliant, my number 1 compliant and really only complaint with the Kuny's belt I've had a couple of, is the hammer is constantly smacking the side of your knee.

@Man3T 16 күн бұрын

Hello from Saudi Arabia 🎉

@davegordon6943 16 күн бұрын

Hello from Virginia

@TheMidwestWaterproofing 16 күн бұрын

love it. thank you.

@joeshmoe8912 16 күн бұрын

One tip i would say is have a flooring mallet with you and use that to persuade the material. Works much better than a block of wood.

@mikemmikem2758 16 күн бұрын

I like the bucket attachment rather the fancysmanchy Perkins one.

@weslangston1034 16 күн бұрын

Pro tip, you should never install a door jamb slammed tight to the framing . Tight to framing isn’t leaving room for expansion, as soon as everything swells up that door won’t shut. Hinge and latch side should both be shimmed for expansion/contraction . Also wouldn’t have needed to plain down the jamb extensions if there was room for shims in the rough opening.