You can find more How To videos with very similar operation to Pioneer W-NEX in-dash receivers in this Pioneer You Tube playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html Please be sure to install the latest firmware update for your Pioneer AVIC-W8400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVIC-W8400NEX#downloads You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

You can find more videos similar to AVH-W4400NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

You can find more videos on Pioneer's KZfaq Channel here: www.youtube.com/@pioneerelectronics

You're guessing wrong. The microprocessor reset simply restart the in-dash receiver and clears the microprocessor in the case of strange operation. The System Restore / Restore Settings in the settings menu will erase many of the receiver's settings such as clock, calendar, audio, Bluetooth, Wi-Fi etc... Many if not all data stored in the system will be reset to factory defaults. It's a good idea to use the restore settings option if you want to clear the data from the receiver and start over. You can learn more about Pioneer NEX receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

The Pioneer DMH-WT7600NEX has a microphone volume control on the phone call screen. This adjusts the volume for the remote caller. You can see this on a similar Pioneer receiver here: kzfaq.info/get/bejne/icCchbd83b-3dJ8.html Please remember, if the remote caller is on a cell phone, the volume on the remote callers phone can be adjusted with the phone's volume control. You can find a full playlist of How To videos from Pioneer about DMH-WT7600NEX here: kzfaq.info/get/bejne/ebuiq8mYp9-WcoE.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

No. For Pioneer in-dash receivers with Apple CarPlay wireless information in Europe and Australia area, Here is link with more information: www.pioneer.com.au/product-category/car/wireless-smartphone/ or this one: www.pioneer-car.eu/eur/products/multimedia-receivers/overview You can find more videos from Pioneer here: kzfaq.info

The Pioneer AVH-W4400NEX is meant to replace the existing car radio. It does not need USB ports to connect to Apple CarPlay. If you want to use the USB ports, they are on the back of the in dash receiver and can be seen in this video: kzfaq.info/get/bejne/es1jf7eTzMrDj58.html

Your system should work with iOS 13 and iPhone 11 pro max. I recommend a few different things. First, please install the latest firmware for your Pioneer AVH-W4400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads You did not mention this in the your question, but I think we are talking about Apple CarPlay with a wireless connection. I recommend to do these things after you have installed the latest firmware. Press the in-dash receiver microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-W4400NEX on the hard key panel at the far right. Next: turn the old phone off. Next: delete all phones from the in-dash receiver's Bluetooth memory. Delete them all. You can see how to do that on a similar in-dash receiver here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html At some point, when the vehicle is off, delete the in-dash receiver from the old phone's Bluetooth memory and it's CarPlay memory. Next: do a System Restore on the in-dash receiver. This will reset all of the in-dash receiver's settings. Pressing the microprocessor reset button does not do this. You can see how to do a System Restore in this video: kzfaq.info/get/bejne/hst4kstpuq7ecqs.html Next: delete the in-dash receiver from the new phone's Bluetooth memory. On the new phone, go to the CarPlay settings and delete any cars that have been previously connected through CarPlay. You want it to seem as though the new phone and the in-dash receiver have not seen each other in the past. Please be sure the new phone is not connected to any other Bluetooth device like a headset or portable speaker. This can block the in-dash receiver from connecting. Now begin the Apple CarPlay Wireless setup from the beginning as shown in the video above. I find it easiest to simply plug the phone into the receiver through USB Port 1. You can see it here: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html The other Apple CarPlay wireless connection options will work too. You can find more How To videos with very similar operation to Pioneer AVH-W4400NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

No. Pioneer MVH-1400NEX does not have the required wireless hardware for Apple CarPlay with a wireless connection. A USB connection to the iPhone is the only option for Apple CarPlay on Pioneer MVH-1400NEX. Pioneer in-dash receivers that work with wireless carplay include Pioneer AVH-W4500NEX seen here: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html Pioneer AVIC-W8500NEX seen here: kzfaq.info/get/bejne/oayXga-JxtDWiKc.html or the Pioneer AVIC-W6500NEX seen here: kzfaq.info/get/bejne/qa6am6WGt6zed6c.html Please be sure to have the latest firmware installed on the Pioneer MVH-1400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/MVH-1400NEX#downloads You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

I recommend you go to a car stereo store and buy a Pioneer AVH-W4400NEX in-dash receiver and have the store install it for you. If you need help finding a local car stereo store, try the Pioneer store finder here: www.pioneerelectronics.com/PUSA/Where-To-Buy You can find more videos from Pioneer here: kzfaq.info

You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's KZfaq Channel here; kzfaq.info

And also will it still be compatible with steering wheel controls?

To make your Pioneer AVH-1550NEX work with your steering wheel controls, you'll need a steering wheel control adapter. Many are available. Here is one possibility: maestro.idatalink.com/product/product/product_id/101 Please be sure to install the latest firmware for your Pioneer AVH-1550NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/SiriusXM/AVH-1550NEX#downloads Pioneer makes many receivers that work with wireless Apple CarPlay. Please consider Pioneer DMH-W4660NEX here: kzfaq.info/get/bejne/eJiEh8l7uqqRlac.html for help with a wireless transmitter, please contact the product manufacturer. You can find a full playlist of How To videos about Pioneer NEX in-dash receivers here: kzfaq.info/get/bejne/fb5olaiFrdC-m5s.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

Thank you so much for the help

Software is certainly part of it but, nearly all is hardware. Apple designed Apple CarPlay Wireless to work through WI-FI, not through Bluetooth. Your Pioneer AVIC-8100NEX does not carry a Wi-Fi chipset so Apple CarPlay wireless can't work. Bluetooth is an important part of the connection process for Apple CarPlay. However, when the connection is complete, Bluetooth is not being used. All wireless communication between the phone and in-dash receiver is through Wi-Fi. There are several Pioneer in-dash receiver models with Apple CarPlay wireless capability including Pioneer AVH-W8500NEX seen here: kzfaq.info/get/bejne/oayXga-JxtDWiKc.html or the Pioneer AVH-W4500NEX here: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html Pioneer also has several large screen format receivers available in spring 2020. You can see a preview here: kzfaq.info/get/bejne/oamHbMV7mMm-ZaM.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Deckerd Otto Thank you for the quick and informative reply.

Are you sure you've got the same stereo? What model number do you have? You can find more videos about Pioneer AVH-W4400NEX here: kzfaq.info/get/bejne/es1jf7eTzMrDj58.html

Here is a video for connecting Android phones to compatible Pioneer in-dash receivers with a wireless connection: kzfaq.info/get/bejne/r9WAeJqWq56YXWQ.html It's possible your Motorole G7 will not connect with the normal operation. If that's the case, you may need to take these setps: There is no trouble with the Pioneer AVH-W4500NEX. It's operating normally. The reason it won't connect wireless for Android Auto is because Motorola has not enabled Android Auto Wireless on your phone. If Motorola has not enabled Android Auto Wireless on your phone you may want to try this: mspoweruser.com/tutorial-how-to-setup-wireless-android-auto-on-non-google-phones/ If you are thinking, I'll return this thing to the store and get another brand that will work with my phone, please do some research before you do it. You'll find that your phone won't connect to any brand of in-dash receiver for Wireless Android Auto at this time. It's the phone, not the in-dash receiver. The other option is to use Android Auto with a wired connection through USB Port 2. Don't use USB Port 1, it will not work for Android Auto. You can see it here: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html When Motorola enables Wireless, you'll be able to use it. You can find more How To videos with very similar operation to Pioneer AVH-W4500NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Please provide a little more information. What is the model number of your Pioneer in-dash receiver? Is the system set up in Standard Mode or Network mode? What speakers are you using? Front and rear? Or another setup? Do you have an external amplifier? Or a factory amplifier in the vehicle? Do you have a subwoofer in your system?

@@pioneerelectronics the model is Pioneer avh1300 NEX, Standard mode, sound mode 1, There is a sub Jbl bass pro 12 with it own built in amp, the front and rear speakers are factory Bose speakers that came with the vehicle. The pioneer is pushing the factory Bose amp, thank you for the write back

@@joseph12566 The Pioneer AVH-1300NEX was manufactured back in 2016. Please be sure to install the latest firmware for the AVH-1300NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-1300NEX#downloads After you install the firmware update, I recommend to do a microprocessor reset. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-1300NEX at the top of the hard key panel beside eject. When you say the "Pioneer is pushing the factory bose amp", please be more specific. Are you saying you're using the Pioneer speaker level outputs wired into the bose factory amp? If so, are you using a live level convertor in this connection? Are there EQ or crossover settings on the line level converter? Or are you using the Pioneer RCA outputs to the bose factory amp? The Pioneer AVH-1300NEX uses the front speaker outputs and front RCA outputs only for Bluetooth phone calls and voice commands from Apple CarPlay. Music from Bluetooth or through Apple CarPlay is played back from all outputs, front, rear, and subwoofer outs. You can set the front HPF crossover much lower than 90Hz and all the down to 25Hz if you want. Please take a look at this How To video from Pioneer for a demonstration: kzfaq.info/get/bejne/kJ5mmbSj3tW2hp8.html However, lowering the crossover point on a HPF will not filter out higher frequencies. I'm not sure where you are seeing a crossover point that is higher than 90Hz. This makes me wonder if the system is setup in Network mode and you are looking at the LPF for the midrange output. Please check to be sure you are using the front crossover setup in Standard Mode. When on the front crossover, It may help to change the slope to 6dB per octave. This will give a slower roll off and fill in more of the lower frequency output on the front speakers. As a test, I recommend to switch Sound Mode to Off and be sure to switch the Sound Retriever to Off. You can see it here: kzfaq.info/get/bejne/kJ5mmbSj3tW2hp8.html

@@pioneerelectronics Thank you so much, I turned off the sound mode and the sound retriever like you said and all the extremely high frequencies are gone, thank you for solving my issue. I’m going to do the reset next to get the car play up and going. Thank you again

The Pioneer DMH-Z5350BT uses a USB connection for Apple CarPlay in countries where CarPlay is available. pioneer-mea.com/en/products/dmh-z5350bt/ and www.pioneer-car.eu/eur/products/dmh-z5350bt/specifications You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

The Pioneer MVH-1400NEX works with Apple CarPlay with a wired connection through USB. MVH-1400NEX does not support wireless Apple CarPlay. If you are looking for a Pioneer receiver with Wireless Apple CarPlay please consider the Pioneer DMH-W4660NEX seen here: kzfaq.info/get/bejne/eJiEh8l7uqqRlac.html or the Pioneer DMH-WT7600NEX seen here: kzfaq.info/get/bejne/hZ-pi82X2sC0pIE.html or the Pioneer DMH-WT8600NEX seen here: kzfaq.info/get/bejne/h9imgc54zLjTZ3k.html You can learn more about setting up Apple CarPlay with a wired connection through USB in this Pioneer How To video: kzfaq.info/get/bejne/nZuaqMR8s77WaWQ.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

Please allow me to make sure I understand your question. You did not mention what model number of Pioneer in-dash receiver you have. From your question, I think you have a Pioneer in-dash receiver with a Wireless connection to Apple CarPlay. And you have at least 2 iPhones that have been set up with the in-dash receiver to work with Apple CarPlay. You have 2 iPhones in the vehicle, and you want to freely switch between the two phones for Apple CarPlay. If that's the question, the answer is very easy. Start the vehicle, and allow a few seconds for the the in-dash receiver to get up and running and automatically connect to one of the two phone. (Please note, when the vehicle was previously shut down, if the in-dash receiver was on a source other than Apple CarPlay, for example AM/FM Radio, it will return to that source and not to CarPlay). By pressing the Home Button hard key on the in-dash receiver you can see what phone is currently connected the in-dash receiver for Apple CarPlay on the bottom left of the screen. You can see it here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html Touch the named connected phone button on the touch panel Home Screen. Not the CarPlay button. At the bottom left of the in-dash receiver touch screen is a button with two arrows pointing to and from a phone. Touch that button and the list of available carplay phones will appear. Touch the phone you would like to be the active CapPlay phone. This will also work if you have one of the iPhones plugged into USB Port 1 on the Pioneer in-dash receiver. You can find more operation videos with very similar operation in this Pioneer Playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

No. The Pioneer AVIC-8200NEX does not carry the required wireless hardware for CarPlay wireless.

Once the setup process in complete, the in-dash receiver and phone will automatically make a wireless connection and start Apple CarPlay each time you start the vehicle. This process can be defeated in the settings menu if you want. You can find more videos similar to AVH-W4400NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

As of 2021 January, Pioneer makes many different in-dash receivers with Wireless Apple CarPlay. The Pioneer AVH-W4400NEX and AVH-W4500NEX work with wireless Apple CarPlay. You can learn more about Pioneer receivers with wireless Apple CarPlay here: kzfaq.info/get/bejne/hZ-pi82X2sC0pIE.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

The setup process for Apple CarPlay wireless is a one time thing. From that point forward, the phone and the in-dash receiver should find one another automatically and connect Apple CarPlay. This does not necessarily mean Apple CarPlay wireless will display on the screen every time you start your vehicle. For example, if you had the HD radio source displayed on the screen when you switched the vehicle off, the in-dash receiver will return to the HD Radio source when you start the vehicle again. This is normal operation. Pressing the display button will change between Apple CarPlay and the Pioneer source screen. You can learn more about Apple CarPlay on Pioneer NEX in-dash receivers here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

The Pioneer AVH-Z9250BT has 2 USB ports on the back of the receiver. USB port 1 is used for Apple CarPlay. USB port 2 is USED for Android Auto. Don't use USB port 1 for Android Auto. It does not work. You can see this demonstrated in this How To video from Pioneer: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html Please watch the video with the sound on. You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

There could be a number of different issues to correct. I recommend to go through the list of items below, one or more should get you going again. On the old phone: 1. delete the Pioneer receiver from the phone's Bluetooth memory. 2. go into Apple CarPlay on the phone and delete any reference to the Pioneer receiver. 3. turn the old phone off for now. On the new phone: 1. delete the Pioneer receiver from the phone's Bluetooth memory. 2. go into Apple CarPlay on the phone and delete any reference to the Pioneer receiver. 3. Restart the new phone. On the Pioneer receiver: 1. delete all phones from the receiver's Bluetooth Memory. You can see this on a similar receiver in a video from Pioneer here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html 2. Press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-W4500NEX on the hard key panel to the far right beside eject. 3. Do a full Restore Settings on the receiver. With the vehicle safely parked and the parking brake engaged, touch the gears>toolbox> and scroll down to Restore Settings>All Settings You can see this on a similar receiver in a video from Pioneer here: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html Once the receiver restarts go through the receiver's initial setup process. Next, begin the wireless Apple CarPlay pairing process from the beginning as shown in this video: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html There are multiple ways to setup Apple CarPlay wireless. Please watch the full video and choose the one that will work best for you. You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

Apple CarPlay can work through a Wi-Fi connection on Pioneer AVIC-W8400NEX. This can give you phone calls, navigation, and music through the in-dash receiver using a Wi-Fi connection for Apple CarPlay. It's possible to use just Bluetooth and not the Wi-Fi connection, and it's possible to use Apple CarPlay with a wired connection to charge your phone. You can find more information about Apple CarPlay in this video: kzfaq.info/get/bejne/nZuaqMR8s77WaWQ.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

The short answer is yes. In most cases, a phone can only be connected to one WI-FI device at a time. With Apple CarPlay wireless, the phone will be connected to the in-dash receiver through WI-FI and all data will operate through the phone's "Cell phone data" connection. The in-dash receive does not have a SIM card and does not provide any data. In order to use Apple CarPlay and still use your mobile hotspot, I recommend the wired version of Apple CarPlay. It's identical to Apple CarPlay wireless and it has the benefit of charging the phone while in use. You can see it here: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Deckerd Otto that’s what I thought. I was hoping the CarPlay wireless would work using just Bluetooth when WiFi wasn’t connected. Speaking of charging, isn’t wireless CarPlay really a huge drain on battery? Especially when using heavy GPS chip dependent app like Waze? Should one even bother with wireless? So in having a data plan scenario (instead of mobile hotspot), I am still having a dilemma on whether to go with wired or wireless CarPlay unit. I can see an advantage of wireless CarPlay, in it working with wireless charging to eliminate the connecting wires step - you just drop and go. I was also thinking about future-proofing - a real possibility that Apple completely drops a charging port in favor of going totally wire free. On the other hand, if I am using wired charging and am charging through the units’USB port, it can get annoying the phone asking each time whether to connect wired or wirelessly (unless I use 12v lighter charger).

Wireless Apple CarPlay does not need to use the phone's GPS chip. The in-dash receiver has a GPS antenna and receiver. You can see it here: kzfaq.info/get/bejne/es1jf7eTzMrDj58.html CarPlay uses GPS data provided by the vehicle if possible because it's typically more accurate than what the phone can provide. Carplay does drain the battery but, not at an extremely heavy rate, especially if you have the phone screen switched off. If your phone has a data plan, you don't need to choose between wireless or wired. You can use the wireless connection when you want, and when the phone battery starts to get low you can plug it into the in-dash receiver through USB Port 1 and the phone will automatically switch to the wired version of CarPlay. There is no difference in operation for the user. You can see this work here: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html Once the setup process in complete, the in-dash receiver and phone will automatically make a wireless connection and start Apple CarPlay each time you start the vehicle. This process can be defeated in the settings menu if you want. You can find more videos of an in-dash receiver similar to Pioneer AVH-W4400NEX here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

What worries me is that my iPhone won’t use the 4G for internet if a wifi is connected. Maybe this is not a problem with carplay wifis.

Don't worry. It works. iOS and your iPhone are designed to use 4G for internet access when Apple CarPlay is connected with a Wireless Connection. You can find more How To videos about Pioneer NEX in-dash receivers in this playlist: kzfaq.info/get/bejne/arB4dKuBy7nGqqs.html and you can find more videos on Pioneer's You tube Channel here: kzfaq.info

What is the model number of your Pioneer in-dash receiver? Please be more specific with your question. Is this a new receiver, that has never been set up? Or is this an existing receiver, and a new phone?

Yes, you can. Please read the full answer: Here is a video that is about setting up Amazon Alexa on your Pioneer AVIC-W8500NEX. I understand you did not ask about Alexa, however, in the video, you'll see the exact same set up process will give you KZfaq from your iPhone. kzfaq.info/get/bejne/irFdgL2WmbTIcX0.html Please be sure to install the latest firmware for your Pioneer AVIC-W8500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/GPS-Navigation/AVIC-W8500NEX#downloads You can find more videos with very similar operation to AVIC-W8500NEX here: kzfaq.info/get/bejne/rtygZZxilarVgac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

No. Pioneer AVH-1300NEX uses a wired connection through USB for Apple CarPlay. You can see it here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html You can see more videos about Pioneer AVH-1300NEX in this You Tube playlist: kzfaq.info/get/bejne/nrtxfbOf26mxl5c.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

AVIC-F80BT works with Apple CarPlay with a wired connection through USB. Be sure to use USB port 1 for Apple CarPlay. You can learn more about setting up your receiver to work with Apple CarPlay in this video: kzfaq.info/get/bejne/nZuaqMR8s77WaWQ.html You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzfaq.info/get/bejne/rLR4eNmkv5uue5c.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

I think you are asking about Pioneer AVH-2550NEX and the answer is no. The Pioneer AVH-2550NEX does not have the necessary hardware to work with Apple CarPlay wireless. The Pioneer AVH-2550NEX works with Apple CarPlay with a wired connection through USB. You can see a video with similar operation here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html If you are interested in a Pioneer in-dash receiver with Apple CarPlay Wireless I recommend the AVH-W4500NEX here: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html or the Pioneer AVIC-W8500NEX here: kzfaq.info/get/bejne/oayXga-JxtDWiKc.html or the Pioneer AVIC-W6500NEX seen here: kzfaq.info/get/bejne/qa6am6WGt6zed6c.html Please be sure to install the latest firmware update on your Pioneer AVH-2550NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2550NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

You'll need to use the AV input on the back of the AVIC-5201NEX. You can see the AV input in this video: kzfaq.info/get/bejne/ndKDqLSStMzceok.html You'll need an Apple Digital AV adapter with HDMI output and an HDMI to RCA adapter to plug into the back of the in dash receiver. kzfaq.info/get/bejne/o66gicmg2svTdXk.html Video can only be seen when the parking brake is engaged. Check out this video for more information: kzfaq.info/get/bejne/Y8h2Ztir38e4Y2Q.html

No. The Pioneer AVH-X490BS does not work with Apple CarPlay. If you are looking for a Pioneer receiver that works with Apple CarPlay there are many to choose from including Pioneer DMH-W4660NEX here: kzfaq.info/get/bejne/eJiEh8l7uqqRlac.html or the Pioneer AVH-2500NEX here: kzfaq.info/get/bejne/aKxyqamd0ZyrlaM.html. You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

You can have Apple CarPlay on the Screen. Or, you can have Android Auto on the screen. You can switch freely between them. You can't have them both on the screen at the same time. If you are using the wireless connection method as with Pioneer AVH-W4500NEX seen here: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html Only one phone can be connected to the WIFI at a time, but you can switch between them when you want. This system has 2 USB ports and each is designed to operate independently from the other. Different Pioneer systems have only one USB port that can operate both Apple CarPlay and Android Auto from the same USB. You can see one here: kzfaq.info/get/bejne/nc2GgqR2vcvOeac.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

No, The Pioneer SPH-DA120 was produced long before wireless Apple CarPlay was available. If you are looking to upgrade to wireless apple carplay please consider the Pioneer DMH-W4660NEX seen here: kzfaq.info/get/bejne/eJiEh8l7uqqRlac.html You can find more videos about Pioneer NEX in-dash receivers here: kzfaq.info/get/bejne/hK9dks2hsrjYdXU.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

What is the model number of your Pioneer in-dash receiver? What phone are you using? I recommend to delete all previous phones from the in-dash receiver's Bluetooth Memory. You can see it here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html Please be sure your phone is not connected to another Bluetooth device like a head set or portable speaker. This can block the in-dash receiver from connecting. Please be sure your receiver has the Auto Connect and Visibility setting set On. You can see it here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html Please be sure your in-dash receiver is not connected to another phone. You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

@@deckerdotto6035 first of all thank you so much for replying! I got Pioneer 4400 with latest firmware(maestro also installed). iPhone 12 Pro Max with latest IOS. They seem get paired but in the iPhone it shows “not connected” and when click on it, the connection is established. That is Weird as I have never seen that with previous iPhone. Also sometime the Bluetooth sign is totally gone in pioneer and it may or may not come back. But next car restart seems ok, very unstable.

I recommend to start over like you have a new receiver and a new phone. Start by deleting the in-dash receiver from the phone's Bluetooth Memory. Next, take a look at the CarPlay settings in the phone when the phone is not connected to the in-dash receiver. If possible, delete the in-dash receiver, or vehicle, from the phone's CarPlay memory. Next, and this is very important. Please restart your phone. Next, delete all phones from the receiver's Bluetooth memory. You can see it here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html Next, and this is very important, I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the receiver's microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-W4400NEX on the hard key panel to the far right beside the eject button. And next do a System Restore on the receiver. You can see it here: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html After the microprocessor reset and System Restore, start the CarPlay set up process as shown in this video: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html Please be sure no other phones are connected to the in-dash receiver before starting the CarPlay setup process. You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

The Pioneer AVH-4200NEX requires a wired connection to the iPhone for Apple CarPlay. You can learn more about setting up your Pioneer AVH-4200NEX to work with Apple CarPlay in this video: kzfaq.info/get/bejne/nZuaqMR8s77WaWQ.html Please be sure to install the latest firmware for your Pioneer AVH-4200NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-4200NEX#downloads You can find a full playlist of How To videos from Pioneer about AVH-4200NEX here: kzfaq.info/get/bejne/bLyJZJOmqM6yhH0.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

I recommend to do a number of different things. Any one of them may correct the issue. 1. If the old phone is still around, on the old phone, delete the in-dash receiver from the phone's Bluetooth memory, and Delete the in-dash receiver from the old phone's CarPlay list of vehicles. 2. Please be sure to update your Pioneer AVH-W4400NEX to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads 3. On the in-dash receiver, delete all phones from the receiver's Bluetooth Memory. You can see this here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html 5. On the new phone. Delete the in-dash receiver from the phone's Bluetooth Memory, and delete the in-dash receiver from the phone's CarPlay list of vehicles. Important > Restart the new phone. 6. Press the in-dash receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-W4400NEX on the hard key panel to the far right. 7. On the in-dash receiver, make sure Auto Connect and Visibility for Bluetooth are on. You can see it here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html Even though the Apple CarPlay connection is a Wi-Fi connection, the first step in the CarPlay connection process each time you start the vehicle is Bluetooth. 8. Begin the Apple CarPlay wireless connection process from the beginning. You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzfaq.info/get/bejne/rtygZZxilarVgac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

@@deckerdotto6035 i did all of that.. i did also factory reset the old phone and reset all setting even bluetooth on the radio, however the old phone carplay name still appears on the radio, seems like the bluetooth is clear but the wifi wont clear itself.. the paperclip reset also doesnt clear the memory.. thanks for quick response deckerd.. hope someone have the same issue find the fix..

This is a very unique issue. Doing a Restore All Settings on the in-dash receiver will usually clear all previous devices that have been connected to the receiver. You can see Restore Settings on a similar receiver here: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html Please clarify: Are you saying you can not delete the old phone from the in-dash receivers Bluetooth Memory? You can check this in the Bluetooth Settings > Connection Menu. If you see the old phone, touch the trash can to delete it. If any other BT devices are in the vehicle turn them off or remove from the vehicle completely including the old phone. (BT ear buds, BT watches, or any other electronic BT devices) Depending on the vehicle, if it had OEM built in BT with the factory radio, even though the OEM radio was removed there could still be a hideaway OEM BT module left in the vehicle that was previously paired with the older phone. If so, that BT module may need to get disconnected or the fuse pulled to disable it. After you have connected the new phone to Apple CarPlay, When you re-start the vehicle, with the new phone in the vehicle and the new phone's Bluetooth window open, and the old phone turned off or in a distant location, go to the receiver's home screen. One the receiver's home screen, touch the phone icon at the bottom left. This will search for devices to connect with CarPlay. You can see this here: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html You should be able to find your new phone and connect. Are you using an iDatalink Maestro RR module in the vehicle? If so, a few suggestions: If so, we may need to tell Maestro in the OEM SETTINGS of the AVH-W4400NEX that we are using the Pioneer BT mic, not the OEM mic. Maestro may let them delete BT phone info as well . I think in Maestro you can restore the maestro module but you do not lose the Maestro programing for the vehicle and AVH-W4400NEX radio its in. Can also restore the entire radio and this usually delete all stored phones unless maestro installed or OEM BT module is still in vehicle.

The apps that appear on Apple CarPlay must be designed by the app developer and approved by Apple to work on CarPlay. When the sound cloud app is developed to work and, approved by Apple for CarPlay it will appear on the CarPlay screen. Until that time, I recommend using the Bluetooth Audio Source, or the iPod Source on the in dash receiver to listen to the Soundcloud app. You can find more videos about the Pioneer AVH-W4400NEX here: kzfaq.info/get/bejne/Y8h2Ztir38e4Y2Q.html

The Pioneer AVH-Z9250BT uses the GPS antenna for both Android Auto wireless and Apple CarPlay wireless in regions where these services are available. Phones that are capable of Android Auto or Apple CarPlay have built in GPS receivers, however GPS data provided by the vehicle is recommended for more accurate tracking of the vehicles motion. In addition, this in-dash receiver is capable of a wireless connection for Android Auto and CarPlay. That means it's very possible the phone may be in a hand bag, or in a pocket while driving, and will not receive a consistent GPS signal. If you are relying on the phone for GPS you'll be lost. You need the consistent GPS signal provided by the in-dash receiver and it does not matter where you have the phone or if the phone can receive GPS. You can find a full playlist of How To videos with very similar operation to Pioneer AVH-Z9250BT here: kzfaq.info/get/bejne/hcigfruo17Scpac.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info And by the way, the !!! on your keyboard appears to be stuck.

No. The Pioneer AVH-280BT does not support Apple CarPlay. If you are looking for a Pioneer receiver that works with Apple CarPlay wireless please consider the Pioneer DMH-WT7600NEX seen here: kzfaq.info/get/bejne/hZ-pi82X2sC0pIE.html You can find a full playlist of How to videos from Pioneer about AVH-280BT here: kzfaq.info/get/bejne/psCBYK5ikpnGaI0.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

What is the model number of your Pioneer in-dash receiver? If you have an iPhone 5 or newer and a compatible Pioneer in-dash receiver, that's all you need to make Apple CarPlay Wireless work. Not all receivers work with CarPlay or wireless CarPlay. You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

You can find more videos about Pioneer NEX in-dash receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

No. Apple CarPlay does not work on AVH-270BT. The AVH-270BT was first manufactured back in 2013. That's before Apple CarPlay existed. If you want to get Apple CarPlay in your vehicle, you'll need a new in-dash receiver. Pioneer has many options. Please consider Pioneer DMH-W4660NEX seen here: kzfaq.info/get/bejne/eJiEh8l7uqqRlac.html Or Pioneer DMH-WT8600NEX seen here: kzfaq.info/get/bejne/h9imgc54zLjTZ3k.html You can learn more about Apple CarPlay here: kzfaq.info/get/bejne/arB4dKuBy7nGqqs.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

Wireless mirroring works for Android based phones only. Wireless mirroring does not work with iPhone, unless you are using software that is not authorized by apple. iPhone mirroring works with a wired connection, through the Apple Digital AV Adapter and an HDMI connection to the in-dash receiver. You can find more videos with very similar operation to Pioneer AVH-W4400NEX here: kzfaq.info/get/bejne/hcigfruo17Scpac.html Please be sure to update you Pioneer AVH-W4400NEX to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

The Pioneer AVH-W4500NEX is designed and manufactured for the North American market. If you are considering buying a Pioneer receiver, I strongly recommend buying a product that is designed for the region in which you intend to use it. The Pioneer AVH-Z9250BT is designed for the middle eastern region. The two receivers are very similar in operation. Language support, App support, AM/FM Radio, and SiriusXM will be different on the two models. You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

@@deckerdotto6035 i have 3 questions ? 1 why you strongly recommend buying a product that is designed for the region in which you intend to use it ? 2 what is the SiriusXM ? 3 are The Pioneer AVH-Z9250BT have wireless andorid auto and wireless apple car play ?

What do you mean by "be on your phone"? Do you mean make a phone call while driving? Yes. Send and receive text messages? Yes. You can learn more about using Apple CarPlay on a Pioneer NEX in-dash receiver here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html You can find more How To videos about Pioneer NEX in-dash receivers in this Pioneer You Tube playlist: kzfaq.info/get/bejne/gb2RjMmK0J-UeYk.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

i mean like drive and still navagate theough your phone in your hand, like send a text by typing on your phone instead of using siri through carplay while driving

Yes. You can use the phone in your hand.

Please let me help. What is the model number of your Pioneer in-dash receiver? You can usually find the model number near one of the corners of the face of the in-dash receiver. It should start with the letters AVH, or AVIC, or MVH. If the Bluetooth settings are grayed out, you need to engage the vehicle's parking brake in an ON-OFF-ON operation. If you engage the parking brake and still can't access the Bluetooth settings, the vehicle may have an incorrect connection to the receiver's Green Parking Brake Wire. You can learn more about the Green Parking Brake Wire here: kzfaq.info/get/bejne/Y8h2Ztir38e4Y2Q.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

If you mean a Pioneer AVH-Z5050BT, Apple CarPlay works with a wired connection through USB. You can find a full Pioneer playlist of How To videos about Pioneer NEX in-dash receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html You can find more video on Pioneer's KZfaq Channel here: kzfaq.info

Please supply some additional information. What is the vehicle? Make, model, and year? Please reply with the exact message as it appears on the receiver screen. Does the message appear shortly after starting the vehicle, or when you change sources, or is there some other type of trigger for this event? Are you using a "flush mount" or other type of USB connection to the back of the receiver? Or are you using the USB extension cable that was packaged with the receiver? Are you using Maestro RR or Metra Axxess in this installation? For Apple CarPlay, are you using a wired connection? Or a wireless connection? What is the phone? What version of iOS?

@@pioneerelectronics The message appears when I first start the truck. (2012 ram 1500). I am using a maestro rr. Everything worked flawlessly in the beginning. and it randomly started doing this. I will start the truck then a voice messages comes through saying something about "please connect storage device with update file" and I have already updated to latest firmware. I have the usb extension cable plugged in that came with it but nothing plugged into. I just have it extended into the cabin in case I need it. For apple carplay I am connected wirelessly. However even when not connected it will still play this message upon start up. I can film a video of the whole process if that would be more helpful. I am on the latest iOS.

@@KeepinItSteezyy Thank you for your response. Recording video with sound of the process would be very helpful. Just so I understand, there is no error message that appears on any screen. It's an audio command. Please explain in more detail this sentence: " I will start the truck then a voice messages comes through saying something about "please connect storage device with update file" Is this an audible command you are hearing from the vehicle's speakers? Or from the phone? or some other source? Can you identify the voice? Is it Alexa? Is it Siri? or a navigation app voice?

No, the Pioneer SPH-DA120 was first produced in 2013-2014. This was long before Apple CarPlay Wireless was available. You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Deckerd Otto thank you. I’ve got full mirror to my stereo. Through hdmi but it’s wired of course. I get everything on my phone on my stereo screen though so that’s good enough for me. 👍👍

My records show the Pioneer AVH-X8700BT was manufactured back in 2014 and it does not work with Apple CarPlay. I recommend to contact Pioneer Customer Support in Europe: www.pioneer-car.eu/eur/support/contactform

Many thanks

You can not play You Tube Videos through Apple CarPlay. You can play You Tube videos from an iPhone through HDMI input. You can find more videos about Pioneer AVH-W4400NEX here: kzfaq.info/get/bejne/es1jf7eTzMrDj58.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

The Pioneer AVIC-F80DAB works with Apple CarPlay with a wired connection to USB Port 1 on the back of the in-dash receiver. Be sure to use a high quality cable to connect your phone to the receiver. Just because a cable will charge your phone does not mean it will carry the data necessary for Apple CarPlay. You can see how to set it up on a similar receiver in this Pioneer video: kzfaq.info/get/bejne/nZuaqMR8s77WaWQ.html Please be sure to update the firmware on your Pioneer AVIC-F80DAB. You can find it here: www.pioneer.com.au/shop/uncategorized/avicf80dab/ You can find a full playlist of How To videos from Pioneer with very similar operation to AVIC-F80DAB here: kzfaq.info/get/bejne/rLR4eNmkv5uue5c.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

What is the model number of your Pioneer in-dash receiver? If you have a Pioneer video receiver with 2 USB ports, only USB port one can be used for Apple CarPlay. You can learn more about using Apple CarPlay with USB port 1 in this How To video from Pioneer: kzfaq.info/get/bejne/nZuaqMR8s77WaWQ.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

The Pioneer DMH-1500NEX works with Apple CarPlay with a wired connection through USB. It also works with Android Auto with a wired connection through USB. You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

That's correct. The Pioneer AVIC-8100NEX does not have built-in Wi-Fi. You can use Apple CarPlay with a wired connection through USB to your iPhone. You can learn more about connecting your Pioneer receiver to your iPhone for Apple CarPlay in this How To video from Pioneer: kzfaq.info/get/bejne/nZuaqMR8s77WaWQ.html You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzfaq.info/get/bejne/bLyJZJOmqM6yhH0.html Please be sure to install the latest firmware for your Pioneer AVIC-8100NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVIC-8100NEX#downloads and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

Pioneer AVH-4100NEX works with Apple CarPlay with a wired connection through USB. As of 2019 June, wireless Apple CarPlay is available in Pioneer AVH-W4500NEX. You can see it here: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html and AVIC-W8500NEX seen here: kzfaq.info/get/bejne/oayXga-JxtDWiKc.html You can find a video about Apple CarPlay with Pioneer AVH-4100NEX here: kzfaq.info/get/bejne/nZuaqMR8s77WaWQ.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

The in dash receiver in the video above is Pioneer AVH-W4400NEX. It has detachable face security. You can see it here: kzfaq.info/get/bejne/es1jf7eTzMrDj58.html

Deckerd Otto great thanks for the info

Connecting to Apple CarPlay wireless is done through Wi-FI. And Connecting to Android Auto Wireless is done through WI-FI. You can see that here: kzfaq.info/get/bejne/r9WAeJqWq56YXWQ.html

What model of Pioneer in-dash receiver do you have? The model number is usually printed on the face of the in-dash receiver in one of the corners.

AVH-1300NEX

Pioneer AVH-1300NEX does NOT work with WIRELESS Apple CarPlay. It does work with wired Apple CarPlay. You can see a video of how to set up Apple CarPlay here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html Please be sure to have the latest firmware installed on your Pioneer AVH-1300NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-1300NEX#downloads You can find more videos about Pioneer AVH-1300NEX in this Pioneer Playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

You’ll need to engage the vehicle’s Parking Brake in an ON-OFF-ON operation in order to access the Bluetooth setup menu. This might also be known as the Hand Brake or the Emergency Brake. If you engage the vehicle’s Parking Brake and still can’t access the Bluetooth menu, the in-dash receiver’s Green Parking Brake Wire may have an incorrect connection to vehicle. You can learn more about the Green Parking Brake Wire in this Pioneer How To video: kzfaq.info/get/bejne/Y8h2Ztir38e4Y2Q.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

What is the model number of your Pioneer in-dash receiver? If your clock and radio stations, Bluetooth settings reset each time you start your vehicle, the in-dash receiver may have an improper connection for the Yellow Wire. The Yellow Wire must have constant power from the vehicle. This means if the vehicle is switched on or switched off, the yellow wire should measure at ~12 volts. The Red Wire is for accessory. You can view the red wire as the receiver’s on/off switch. The red wire should measure ~ 12 volts only when the vehicle is switched on. ---Do not connect the Red Wire and Yellow Wire together. --- Please take a look at this video for more information on wiring your Pioneer in-dash receiver: kzfaq.info/get/bejne/Y8h2Ztir38e4Y2Q.html You can find more videos on Pioneer's KZfaq Channel here: www.youtube.com/@pioneerelectronics

@@pioneerelectronics the receiver is avh-w4400nex. I can get it to connect to carplay when plugged up but as soon as I unplug it disconnects. I also can get it to connect wirelessly sometimes using the bluetooth method shown here but then as soon as the car is shut off and turned back on it doesn't connect. The clock and radio stations all function as normal. The unit it worked fine with my iPhone X that I had for years and seems to not want to work with the new iPhone 14 I just upgraded to.

@@Dats_Mark It sounds like you may not be making the initial Bluetooth Connection from the phone to the in-dash receiver, that allows Apple CarPlay wireless to complete it's connection. Please be sure your phone is not connected to another Bluetooth device like a headset or portable speaker. This can block the in-dash receiver from connecting. The Pioneer AVH-W4400NEX should work with your iPhone 14 for wireless CarPlay. Please follow a few steps to get up and running. Please be sure you have the latest firmware for your Pioneer AVH-W4400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads Please be sure to have the latest version of iOS16.xx (.03 at the time of this note) installed on the phone. The latest version corrected several issues with CarPlay operation. Super important > Please do a soft restart on the phone. To complete a soft reboot on most newer Apple iPhones - bump the Volume up , bump the Volume down then push and hold on the right side power button of the phone till an Apple icon appears, (this takes a while) then let off the power button. Do not slide to power the phone off as this simply turns off the iPhone and restores nothing. I recommend to follow these steps to get things operating normally again. 1. Press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-W4400NEX on the hard key panel to the far right beside eject. 2.Delete all phones from the in-dash receiver's Bluetooth Memory. You can see this demonstrated on a similar receiver in this How To video from Pioneer: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html 3. Next, delete the in-dash receiver from the phone's Bluetooth memory. 4. If possible, go into Apple CarPlay on the phone (settings>carplay) and delete any mention of this vehicle or this phone. 5. Restart the vehicle. 6. Restart the phone. 7. Be sure the phone is not connected to any other Bluetooth devices such as a headset or a portable speaker. This can block the in-dash receiver from connecting. 8. Begin the Apple CarPlay pairing process from the beginning. If you choose to plug the phone in through USB for setup, please watch the phone and be sure to allow the use of Wireless Carplay. If you deny this it will not work wireless. You can see it here: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html

@@pioneerelectronics Thank You for the detailed instructions. The phone iOS is updated and I've done the firmware update, but after running the version still says 1.00, uncertain why that would be when running the update it said it was going from 1.00 to 1.02. I soft rebooted my iphone as you instructed and deleted all the bluetooth connections from the receiver and from carplay and bluetooth on my phone related to the receiver and restarted the phone and vehicle. With no other bluetooth devices connected (including my apple watch) Plugged in the iphone and it asked to allow wireless carplay, clicked yes and it will maintain connection wirelessly after unplugging, unfortunately it seems upon restarting the vehicle it does not auto-connect. I have to click bluetooth on the receiver and select the iphone, then open my iphone and manually connect to the receiver wifi (auto-join is selected but obviously not connecting) and navigate to carplay on the iphone then press the search icon on the receiver and it will finally connect to wireless carplay. But really doing all that pretty much defeats the purpose of wireless carplay. I'll try running these steps over again. Please advise if any other options are available.

What is the model number of your Pioneer in-dash receiver? Some Pioneer receivers can upload background images directly from your phone with the use of the Pioneer Car AVAssist App. Others require a USB flash drive to upload an image. You can learn more about custom images on Pioneer NEX in-dash receivers in this How To video: kzfaq.info/get/bejne/hcigfruo17Scpac.html You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzfaq.info/get/bejne/gb2RjMmK0J-UeYk.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

2400NEX firmware 28.01. I can’t even get apple CarPlay to work wirelessly. Works fine through a usb. Main reason I got this was for apple carplay… I’m disappointed so far

And I tried the flash drive thing. Didn’t work either.

@@teebee2288 The Pioneer AVH-2400NEX does not support wireless Apple CarPlay. On the AVH-2400NEX Apple CarPlay works with a wired connection through USB. You can learn more about it in this How To video from Pioneer: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html You can upload custom images to the AVH-2400NEX from a USB flash drive. Here is a How To video from Pioneer explaining this process: kzfaq.info/get/bejne/hcigfruo17Scpac.html If you want Wireless Apple CarPlay, Pioneer has many options including DMH-W8600NEX seen here: kzfaq.info/get/bejne/h9imgc54zLjTZ3k.html and the Pioneer DMH-W4660NEX seen here: kzfaq.info/get/bejne/eJiEh8l7uqqRlac.html

The Pioneer AVH-Z5250BT uses a wired USB connection for Apple CarPlay. You can find a full playlist of How To videos from Pioneer about similar receivers here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

No, the Pioneer AVH-120BT does not work with Apple CarPlay. You can find a full playlist of How To videos from Pioneer about AVH-110BT/ AVH-120BT here: kzfaq.info/get/bejne/jcV9dJulu5ebgXU.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

The Pioneer AVH-3500NEX uses a USB wired connection for Apple CarPlay. You can learn more about it here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html You can find a full playlist of How To videos from Pioneer about AVH-3500NEX here: kzfaq.info/get/bejne/n8iHqJOgl867Ymg.html Please be sure to install the latest firmware update for your Pioneer AVH-3500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-3500NEX#downloads You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

Apple CarPlay works on the Pioneer AVH-1550NEX with a wired connection through USB. You can learn more about it here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html The AVH-1550NEX does not work with Wireless Apple CarPlay. If you're looking for a Pioneer receiver with Wireless Apple CarPlay please consider Pioneer AVH-W4500NEX seen here: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html or the Pioneer DMH-WT8600NEX seen here: kzfaq.info/get/bejne/h9imgc54zLjTZ3k.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info