Planeprint Big Bobber - Maiden of the Savage Bobber D-MKBB
Рет қаралды 9,027
3 жыл бұрынA cloudy but calmy day. Perfect to leave the Big Bobber the first time to its element. There is not much to see, the starts were not so straight ahead, but the landings went well - nothing broken. ;) CG needs to be a little further back.
I love this beautiful 3d printed plane!!!
@flippincrazycars 2 жыл бұрын
What a great flyer! I’m going to print this out for the summer cannot wait!
@douglawton8186 4 ай бұрын
Beautiful plane!!! I downloaded your seats and instrument panel from Thingiverse. What is the off-white PLA color/brand? Also, what size build plate is needed for the 125% version you printed?
@wwjoesr 3 жыл бұрын
Beautiful plane and flight. The takeoffs were a little dramatic but the landings were very nice!
@alexherrera3918 3 жыл бұрын
Very nice plane.What is the size of the wing chrod and what is the size of the flaps/Ailerons compared to chord? Thanks
@stefankoch2868 3 жыл бұрын
Nice built and flying! Also just started printing my Big Bobber, but it'll take a month or so now until everything is completed. I'll try to make the main-wings and maybe horizontal stab out of stiffened Depron. Your flight area looks familiar as if it was in my vicinity, Niederrhein :)
@SuperJayJoe 3 жыл бұрын
Danke Danke. :) Gewichtseinsparungen durch Depronflächen sind eigentlich garnicht nötig. Da gehen ja auch die schönen Oberflächendetails des 3D-Drucks verloren. Abfluggewicht meines BB ist 1583g und lässt sich mit Flaps full sehr langsam fliegen. Hoffe, dass der Lockdown bald vorbei und der Flugplatz wieder offen ist!
@jamescook485 3 жыл бұрын
@@SuperJayJoe #servus, bin auch gerade dabei den Bobber zu drucken, beschäftige mich gerade mit dem Antrieb, welche Motor combo hast Du verbaut?
@SuperJayJoe 3 жыл бұрын
@@jamescook485 Hallo, der Motor ist ein Roxxy C35-42-1100kV mit 11x5,5 Luftschraube. Akku ist ein 3S Lipo mit 2450mAh.
@jamescook485 3 жыл бұрын
@@SuperJayJoe Super Danke Dir für die Info, bin bei 1250 gelandet, hat der 1100 kv gut reserve oder eher grenzwertig? möchte auch 3s fliegen, daher find ich die 1100 er lösung recht nett
@SuperJayJoe 3 жыл бұрын
@@jamescook485 1100kv ist ideal mit dem 11 x 5,5 Prop. Schon nach wenigen Metern hebt der BB vom Rasen ab und hat auch guten Durchzug. Fliege meist eh nur mit Halbgas. Du könntest bei 1250kv einen Propeller mit weniger Steigung einsetzen.
@vinylbbq519 Жыл бұрын
Hello ! Where I can get the files for this plane..? Thaxs a lot.!
@SuperJayJoe Жыл бұрын
www.planeprint.com/product-page/big-bobber-stl-files
@JaffreLogan 3 жыл бұрын
Bonjours avez vous un lien pour les stl des sièges et des sacoches 💼 ? J’imprime sur une ender3v2 stock et j’ai beaucoup de mal à trouver les réglages avec le profile surface
@igeek007 3 жыл бұрын
Great build! Nice seeing the attention to details. Are the seats and luggage also 3d printed?
@SuperJayJoe 3 жыл бұрын
Yes they are. You can find the STLs of my seats and other asseccories in Thingiverse ;)
@dejanzvonar2248 3 жыл бұрын
Hi, I just started printing mine. Can you please share your motor, esc, prop and battery combo. I would also like to know your CG.
@SuperJayJoe 3 жыл бұрын
Hi. Motor Roxxy C35-42-1100kV, ESC Roxxy 960-6 (60Amp), Prop 11x5,5, 3S Lipo 2450mAh. The CG is now 1mm behind the marking under the wing.
@ripmax333 3 жыл бұрын
did you print in LW-PLA? What's the weight of the Model?
@SuperJayJoe 3 жыл бұрын
It's all printed with normal PLA. Takeoff weight is 1583grams.
@shankarvish457 3 жыл бұрын
can u share the print file
@SuperJayJoe 3 жыл бұрын
Surely! This is the link to the Big Bobber www.planeprint.com/bigbobber
KiKiDo
Рет қаралды 3,9 МЛН
Scary Teacher 3D Gaming
Рет қаралды 56 МЛН
Wine Country RC
Рет қаралды 156 М.
SuperJayJoe
Рет қаралды 338
Great Scene
Рет қаралды 3,4 МЛН