PLUMBING REPAIRS | MEET FLO BY MOEN | AUTOMATIC SHUT OFF VALVE

Рет қаралды 8,521

4 жыл бұрын

We install a moen automatic shut off valve. Check it out. Every day plumbing repairs and installs featured all while my two sons CB2 and Angelo learn the plumbing trade.
kit.co/ChuckBarron/meet-flo-b...
Follow us on social Media
/ charles.barron.9
/ chuckbarron6
/ chuckbarron6
DISCLAIMER: This video is for entertainment purposes only. This video also contains affiliate links which if you click on link and make a purchase I may receive a small commission. This helps support the channel and helps us continue to bring you new video's like this one. Thank you so much for the support. Plumb on!
Check out some of our gear-chuckbarronplumbing.com/
#plumber
#moen
#meetflobymoen
PLUMBING REPAIRS | MEET FLO BY MOEN | AUTOMATIC SHUT OFF VALVE

Пікірлер: 81

@RyanRyanHayes 4 жыл бұрын

Great video!! Great Product!! Even better plumbers!! Thank you!!

@ChuckBarron 4 жыл бұрын

You bet! appreciate that.

@Ted_E_Bear 4 жыл бұрын

The Barron family should be on TV !

@ChuckBarron 4 жыл бұрын

We are...lol

@nelsonechevarria7009 4 жыл бұрын

See that Chuck?Even professionals make mistakes,leaving fittings loose can and does happen to anyone.Good video,thanks Chuck.

@ChuckBarron 4 жыл бұрын

Yes they do

@armandotorres626 4 жыл бұрын

I've always sanded... Just makes sense to smooth out the surface so the oring has a nice clean surface to seal...

@ChuckBarron 4 жыл бұрын

sticking to it...I agree.

@throttlebottle5906 4 жыл бұрын

they all say to do that..............

@JD987abc 11 ай бұрын

Very impressive CB. I’m seriously considering having it installed on my well pump in the crawl space. My home ownership fears are fire and water damage from blown out pipe.

@ChuckBarron 8 ай бұрын

Very good fears. Insurance gives you a discount on moen valves too.

@armandomadrigal9793 4 жыл бұрын

Happy Fathers Day CB, as always awsome videos

@ChuckBarron 4 жыл бұрын

Thanks so much! To you also.

@MikeSmith-er7sz 4 жыл бұрын

I’ve installed some of those valves, good investment.

@ChuckBarron 4 жыл бұрын

Ya i just discovered them not to long ago.

@throttlebottle5906 4 жыл бұрын

hehe, Chuck senior meets black poly pipe. tons of that here, various sizes, as there's lots of well systems and other. I could see the size of it upfront and as you grabbed that piece to install, I said UH-OH lol

@ChuckBarron 4 жыл бұрын

rut row

@toddcook2016 4 жыл бұрын

nice job chuck

@ChuckBarron 4 жыл бұрын

Thanks 👍 i really like these valves. I want to make a better vid with app ect included.

@joeg9920 4 жыл бұрын

Nice job Chuck, always use an ample amount of Teflon tape or spool wicking on those male threaded fittings. You can swab some pipe joint dope over the Teflon but not needed.

@ChuckBarron 4 жыл бұрын

Great tip!

@brewmule6799 4 жыл бұрын

Flo by Moen is nice. It is simple and easy to use. An automatic shutoff system by Leak Defense is much more customizable and can be used on larger mains, up to 3 inch.

@ChuckBarron 4 жыл бұрын

So clutch. Im letting all my customers know about it.

@chuckk.3045 4 жыл бұрын

I always sand, one less thing to worry about when crimping.....good seal!

@ChuckBarron 4 жыл бұрын

Great point! Plumb on Chuck....Great name...ha

@ekiker73 3 жыл бұрын

Gotta sand and ream. If for no other reason do it to cover your tail in the event of a joint failure or blowout. If something were to happen causing property damage to a client's house you can bet your ass the insurance company will deny coverage if they figure out the joints weren't prepped per manufacturer's instructions. I'm pretty sure Milwaukee and Ridgid both tell you to do it. Come to think of it our Ridgid RP-210 press tools all came with a piece of brown scotchbrite pad in the kit.

@feelingtardy 4 жыл бұрын

serious question, does the milwaukee pipe cutter eliminate the need to deburr the copper? i never seem to notice it being done, at least on the inside

@ChuckBarron 4 жыл бұрын

No sir it does not.

@nelsonechevarria7009 4 жыл бұрын

Definitely clean/sand the ends of the copper pipe and also look for deep gouges/deep scratches on the ends of the copper pipe because deep gouges/deep scratches on the ends of the copper pipe will prevent the o-rings in the press fittings from sealing around the copper pipe ends properly.

@ChuckBarron 4 жыл бұрын

Yes .

@dannywilkins887 4 жыл бұрын

Chuck, that pipework really needs a bracket on it, flapping about in the breeze

@ChuckBarron 4 жыл бұрын

We secured it. Got it done.

@plympytheplumber4605 3 жыл бұрын

Always sand and ream. Never reamed for a long time but have gotten into the habit.

@ChuckBarron 3 жыл бұрын

roger that tim.

@angiemoses130 4 жыл бұрын

Sanding does help so the pipes can fit together properly

@ChuckBarron 4 жыл бұрын

Ya I believe my guy read ridgid paper work and not veiga's....thats where confusion came in. sanding for me for sure.

@angiemoses130 4 жыл бұрын

Sure is all the dust and stuff that is on the pipes needs to be cleaned off. Ya know what ya doing even I read where other plumbers said the same thing about sanding. Gas pipes are different than water. Water is where ya cook, clean, and drink.

@mikev.1034 4 жыл бұрын

You got me waiting for a new video like a “crack head”. I need a new video from you everyday!! 😳

@ChuckBarron 4 жыл бұрын

Working on it! But im so anal on editing i could never do daily. I like friday, saturday and a sunday matinee but starts at 6pm. lol

@kenenos6520 3 жыл бұрын

Did you clip the ends of the zip ties after you secured the wire?

@ChuckBarron 3 жыл бұрын

I did better. I changed to a clear zip tie..black zips screamed look at the zip ties.

@kenenos6520 3 жыл бұрын

Chuck Barron strong work! I expected no less!

@joshcowart2446 4 жыл бұрын

I only clean pipe to be pressed if it’s old or has something specific that needs it. If it’s brand new pipe with no oxidation I don’t clean it. Of course that makes no sense because oxidation only really matters when soldering. Though I notice you don’t ream the pipe. For years we never did this and never had issues but it’s something I do now though I’m sure I miss a certain percentage per job. Is that a dresser coupling? Damn you Home Depot. The only way I’d use a dresser coupling is if I was repairing steel pipe and had one of those super beefy ones with 1/2” through bolts the city used to use for repairs.

@ChuckBarron 4 жыл бұрын

ya i never reamed in 35 years. No one who i worked for did either. maybe because our pressure here is great. Not sure but the dressler was by ford company. Local water companies use them all the time. It was painted white...Thanks painter....lol

@johnkrim8377 4 жыл бұрын

Chuck Barron , There is no L in dresser coupling . 👷🏻

@brucebartman36 4 жыл бұрын

Reaming has nothing to do with pressure. When you don't ream your tubing, the edge that the cutting wheel leaves creates turbulence in the tubing which causes the tubing to wear. That's why most of your pinhole leaks are right at a fitting.

@pb9926 4 жыл бұрын

👍👍👍👍👍

@ChuckBarron 4 жыл бұрын

my man...thanks

@throttlebottle5906 4 жыл бұрын

lol, the whizzing fitting.... I finished chinesium auto-drain on air compressor the other day. using junk plastic tubing (poly it claims) it melted down and blew out as I was washing hands...kapppPSHHHHHHHHHHHHHHHHHHHHHHHHHHHH. then I dug around the house/garage and used 1/4" copper tubing as my "mind" said to in the start....

@ChuckBarron 4 жыл бұрын

so mental. lol

@louietheplumber3609 4 жыл бұрын

Chukeeeee your getting mixed up 3/4" & 1" confused don't worry it happens

@ChuckBarron 4 жыл бұрын

had me....lol

@adameinsel7367 4 жыл бұрын

Hey Chuck, I mainly do drains in southern ca. Got a question man. What would you charge a customer to expose a 1/2” copper main (1 foot deep) and solder in a ball valve. And also expose a 3/4” pvc main (also a foot deep) and replace the leaking pvc ball valve? Thanks for any input! And keep the videos coming brotha! 🤘🏼

@DDunc1020 4 жыл бұрын

800

@ChuckBarron 4 жыл бұрын

I like that number....

@ChuckBarron 4 жыл бұрын

I really dont do prices but I really like D dunc 800 number especially if its digging in sand.

@DDunc1020 4 жыл бұрын

Expect the unexpected, drop prices accordingly

@adameinsel7367 4 жыл бұрын

D Dunc thanks. I was well under that, and customer was like why so expensive..

@damnoldguy 4 жыл бұрын

That's a house on pilings near the beach isn't it?

@ChuckBarron 4 жыл бұрын

Yes Sir.

@MoneyMarcMes 4 жыл бұрын

So is that a telephone pole at 13:40 inside someones home???

@ChuckBarron 4 жыл бұрын

barrier island in new jersey. Homes use pilings in construction. Homes built on beach sand

@keithbrueton 4 жыл бұрын

Its Mario and Luigi collect them coins guys

@ChuckBarron 4 жыл бұрын

i can hear the slots ringing of winnings now.

@mrpanos923 4 жыл бұрын

I sand before I propress

@ChuckBarron 4 жыл бұрын

Yes I agree. I did not first and then got the word yes its a must.

@duanedhillon8908 4 жыл бұрын

Transition from plastic to metal ,the plastic should be male and the metal should be female .....

@ChuckBarron 4 жыл бұрын

hmmmmmmmm i see your point.

@jklsr55 3 жыл бұрын

@@ChuckBarron I'm not sure why but I've seen a several of those PVC fip's split when a metal mip was threaded into them. I actually witnessed a very expensive hard wood floor job ruined by water from one of those fip's splitting. Why do you suppose a metal mip causes them to split that way?? I've never heard a good answer to that question. I could see on a hot water line. But cold? Thoughts?

@louietheplumber3609 4 жыл бұрын

Chuck pro press is nice but teach the boys how to solder it will be good for them

@ChuckBarron 4 жыл бұрын

100%. They know it and I know it for sure.