PPE transmission pan install 2020 Explorer ST

Рет қаралды 2,556

Жыл бұрын

A fairly comprehensive installation of the PPE 10R80/10R60 deep transmission pan into my 2020 Explorer ST. Install will vary from model to model, however the basics apply to all 10R80/60 equipped Ford cars and trucks.
ppepower.com/collections/tran...
www.ebay.com/str/maxflowdiesel
www.englishracing.net
#englishracing #turbo #builtnotbought #haltechecu #haltech #10r60 #10r80 #ecoboost #auto #transmission #ppepower

Пікірлер: 21

@davidmandziuk8493 7 ай бұрын

Just use a Mityvac fluid extractor, thru the port. Check stone cold. Extractor has a 9 quart graduated capacity. NO NEED TO DROP THE PAN. Use AMSOIL ULV FLUID, BLUE CAP

@geom.s.70 Ай бұрын

How much oil did you get the right level at?

@hasibmohamed-sm8oy Жыл бұрын

Follow up on how the pan worked out?

@AaronONeal1 Жыл бұрын

Pan had been working great, I think it really needed a fluid change the most.

@hasibmohamed-sm8oy Жыл бұрын

I’m thinking about putting the shallow pan on my 21 platinum but no dealership wants to install it(they said it wouldn’t fit or it’ll leak) so I guess I’ll do it myself, I wanted an update before diving in so thanks for the reply

@jamesriley918 9 ай бұрын

I just received a pan from PPE for the trans in my 2023 Explorer and it did not come with a gasket. What material did you use for the bead of gasket material that is visible in your new pan ?

@ninorandazzo844 Ай бұрын

Me as well, how did it work out for you

@machine7767 5 ай бұрын

What would you think of moving some of the oem magnets to the ppe pan?

@AaronONeal1 2 ай бұрын

I think that would be a great idea

@sergioconuenaocanales4254 11 ай бұрын

What is the serial number of the part? 🙏🏼🙏🏼

@jwuonog 10 ай бұрын

Do you have the part number for the filter? I see both with the smaller hole, and with the larger hole and the extended part around the hole, not sure which one is the newest version.

@AaronONeal1 2 ай бұрын

I don't happen to, but I can see if I have a spare on the shelf.

@joserascon6664 Жыл бұрын

Have you had any issues with your transmission? Since the 10 speed transmission is a known issue.

@AaronONeal1 2 ай бұрын

Only because it was a 10R60 making 600 lb ft with the stock turbos and nitrous. Pan works great, I have it on my new transmission as well.

@zeex-14rse57 6 ай бұрын

What is the total height of the pan? Trying to find specs. Also, how much clearance ya have left after install?

@AaronONeal1 2 ай бұрын

I'm lowered but about 5" to the ground

@lucian7182 Жыл бұрын

Will the lack of heat shields cause any issues ?

@AaronONeal1 Жыл бұрын

I haven't had an issues with trans temp

@lucian7182 Жыл бұрын

@@AaronONeal1 this mod is definitely on my list.

@AaronONeal1 Жыл бұрын

@@lucian7182 I have found that in the morning my 6 mile commute isnt quite enough to get full temperature now. Its not all the way warmed up until I go home for lunch. I dont have anywhere to race it on the way to work though so its not a big deal. But good peace of mind of the racetrack, keeps it average temp.