Tikka Ultralight Rifle

No video

Tikka Ultralight Rifle | Part 2

Рет қаралды 58,145

Күн бұрын

Tikka Ultralight Rifle Part 2 is all about assembling the parts of the rifle into the complete package. Today you'll get a complete picture of this rifle system from tip to tail and everything in between. Stock, muzzle brake, chassis, scope, data card, etc. Everything chosen for a specific purpose. To dominate field and sniper matches. Enjoy.
Precision Rifle Network:
For Competitors, Hunters and Operators!
Sponsored by Modular Driven Technologies www.mdttac.com
LINKS to products you see in our videos -
KESTREL Weather Meter with AB software - amzn.to/2V87Ue8
KESTREL Weather Meter with Hornady 4-DOF - amzn.to/3eq5I9f
Swarovski SLC 15X56 Binos - amzn.to/3fQXPdB
Cole-Tac Ammo Novel - amzn.to/37VQfvh
Cole-Tac Rifle Guardian rain cover - amzn.to/3dw98q5
Area419 Funnel Kit - amzn.to/2YXgU75
Atlas Cal bipod BT-65 - amzn.to/2BxaDqo
Leupold Mark 5 5-25X56 scope - amzn.to/2zSWzXR
Nightforce ATACR 5-25X56 Mil C - amzn.to/3eugRWM
MK Machining Vortex throw levers - amzn.to/3i1tvyO
Storm Tactical Data Book - amzn.to/3fLnDYs
Peltor Tactical Hearing Protection - amzn.to/2Nhqvjw
Walker's Razor Hearing Protection - amzn.to/2YnHjLY
Precision Rifle Fundamentals by Frank Galli - amzn.to/3fKhRGz
Long Range Shooting Handbook by Ryan Cleckner - amzn.to/3dvAYTm
Eberlestock Mainframe Pack - amzn.to/2Yrln2R
Vortex Viper PST Gen 2 5-25X - amzn.to/2YU7g50
MagnetoSpeed V3 Chronograph - amzn.to/3dpE5fh
RCBS Chargemaster - amzn.to/2BxeLGU
Donate: / prn check out the available options.
Music through paid subscription to Epidemic Sound and Artlist
Facebook / prn.actual
Instagram at / precisionriflenetwork
Disclaimer:
I will occasionally use content from other youtube channels. This is legal and allowed through fair use regs. It's just for educational purposes.
All activities seen on this channel are potentially dangerous. I advise you not to try them without proper professional supervision. Imitation or use of any of the acts you see on this channel are solely at your own risk!
You accept all responsibility for your own actions.
#competition #hunting #tikka

Пікірлер: 59

@PrecisionRifleNetwork 3 жыл бұрын

TOTAL WEIGHT: start at 10:30

@Frostytravels Жыл бұрын

like this follow up of this rifle. Building a Tika, Bergara, and a Savage 110 now. All different calibers.

@ncb2734 3 жыл бұрын

Cool looking set up Joel... Looking forward to part 3.........

@PrecisionRifleNetwork 3 жыл бұрын

Thanks. Should be a good shooter. I'm hoping I don't have to handload to get the accuracy I want. I already bought all the factory ammo, so that would be annoying.

@levsky01 3 жыл бұрын

Nice build. You can adjust Tikka trigger less than one pound, just shave attachment bolt to allow adjusting screw get out little bit more and secure it. I'm running my at 11...12 ounces for year now, no issue so far.

@PrecisionRifleNetwork 3 жыл бұрын

Thanks for the tip!

@littlejoey22 2 жыл бұрын

I built this same set up in 270 for my wife, she was having trouble getting a stock that fit her really well, this chassis is the way to go. Light weight and completely modifiable. The folding hinge in the butt stock is rad too, makes it easy for packing.

@Ironsight379 8 ай бұрын

try b5 systems stock

@68pitty 3 жыл бұрын

Love ya work, Joel. From Australia

@PrecisionRifleNetwork 3 жыл бұрын

Pitty Mark Thank you!!

@rpk5250 Жыл бұрын

Great video. I have a similar situation but my Savage already has a proof barrel in it

@rustyshackleford2723 3 жыл бұрын

Like your style of research and presentation

@robertjackson1407 Жыл бұрын

Thank you 😊

@PrecisionRifleNetwork Жыл бұрын

You're welcome 😊

@dunno6442 Ай бұрын

Been considering the hnt26 but this is looking like a good cheaper option.

@PrecisionRifleNetwork Ай бұрын

yeah it's a valid choice. You might also check out Ultradyne Chassis. Not certain if they make a tikka option yet, but it's worth looking into.

@ssamuelt79 3 жыл бұрын

Digging this series Joel, cant wait to see how it shoots. Also, I see ya repping the Tactical Sh*t T shirt, being from St Louis I can appreciate that!

@whiteman3075 3 жыл бұрын

Tikka’s usually like to be torqued to 45 in/lbs. if it doesn’t shoot great try the lower setting.

@PrecisionRifleNetwork 3 жыл бұрын

Jason Whiteman ok thanks. I was going off of the MDT chassis suggestions.

@jimjones9239 Жыл бұрын

The MDT LSS is such a nice chassis, I built one with Tikka T3x action and the skeleton MDT stock with adjustable cheek and pull in Win Mag 300. I used a Proof Carbon 24 inch barrel and a Fat Bastard brake. I put an Arken ARES ETR 4.5x30x50 (poor man's scope, I could not afford the Night Force), Atlas bipod. It weighs half of the Tikka T3x Lite barrel that came with it. I prefer the 5 round detachable box magazine from MDT from the original 3 round box. I feel more recoil than with the heavier barrel using the same brake.

@PrecisionRifleNetwork Жыл бұрын

Sounds like a great rifle 👍

@daingreschok4090 Жыл бұрын

Jim how heavy is your rifle. I’m doing about the same build

@jimjones9239 8 ай бұрын

@@daingreschok4090 The build without the scope or loaded magazine is 8 pounds 6 ounces, the Atlon Ares ETR scope weighs 2.25 pounds and the Magazine with ammo (210gr bullets) 5 rounds around 0.5 pounds fully loaded is 12.5 pounds.

@jimjones9239 8 ай бұрын

The Tikka factory trigger breaks so sharp at 2.5 pounds, I added a M*arbo spring now breaks at 1.5 pound, incredibly sharp and light. It surprises me everytime.

@umami0247 3 жыл бұрын

Nice looking rifle think I'd go with 6.5 PRC. or 7-08. Not sure who makes brownells scopes or much about them honestly. Was a Nikon user till they stopped making scopes. Vortex is now the scope I use. Can't wait till you take this to the range want to see accuracy for this set up.

@PrecisionRifleNetwork 3 жыл бұрын

Coming later this week most likely.

@johnl5974 3 жыл бұрын

good video

@PrecisionRifleNetwork 3 жыл бұрын

Thanks

@ccw22lr 3 жыл бұрын

I'd like to do a build like this too. I wish there were an option for this chassis but with a longer forend and an Arca built in

@PrecisionRifleNetwork 3 жыл бұрын

I agree, wish the forend was slightly longer.

@andersmartin6751 3 жыл бұрын

@@PrecisionRifleNetwork Check out MDT LSS-XL It's a bit longer

@GeorgiaBirdhunter 3 жыл бұрын

XLS Element 3.0

@tgunz64 8 ай бұрын

What’s your barrel length? I’m looking at this chassis or the LSS XL for a 6.5 creedmoor with 18” barrel. I think the standard LSS should work fine for mine. What do you think?

@PrecisionRifleNetwork 8 ай бұрын

Yes standard works well with shorter barrels. Mine was 24-26”. I can’t remember off the top of my head.

@tgunz64 8 ай бұрын

@@PrecisionRifleNetwork ok. Thank you for replying!

@PrecisionRifleNetwork 8 ай бұрын

@@tgunz64 no problem

@frak357 Жыл бұрын

When we talk about weight I kinda giggle a bit because 11-13 pounds is right around where powerful double rifles used to take dangerous game are at. That setup looks nice.

@fabianvaras1273 2 жыл бұрын

Hi the nice build can you recommend a barrel for my tikka in 30-06? You might know a company that carrying custom barrel I will appreciate you help good video

@PrecisionRifleNetwork 2 жыл бұрын

Proof would be a good company to start with. I would also talk to a competent precision rifle gunsmith. They will have some options for you.

@mattcureton 3 жыл бұрын

Great video. 2lbs 8oz or 2.840lbs?

@AliSyd 3 жыл бұрын

Looks like 2.84 lbs doesn’t it. Joel can you please confirm? Thanks.

@rpk5250 Жыл бұрын

I’m just curious on your build how you went from 2.8 pounds for the chassis handle in stock to 10? I’m just curious because I’m considering doing the same thing.

@PrecisionRifleNetwork Жыл бұрын

I'm sorry, could you rephrase your question? I'm not understanding what you're asking me.

@rpk5250 Жыл бұрын

@@PrecisionRifleNetwork thanks. You mentioned earlier in the video that the chassis/butstock/grip weighed 2.8 pounds and with the rifle all put together weighed over 10. Just wondering what added so much weight? I’m considering changing my current oryx chassis to a lighter one but not the mdt hnt. Thanks

@jacobharris1185 Жыл бұрын

@rpk5250 I've been looking a lot at similar pieces to do a build. It just adds up quick. 2.8 pounds then a barreled action can easily be 5 pounds depending on the components. Not sure with this carbon fiber barrel, still maybe close to that. So you're getting close to 8 pounds already. Forget the scope power/ size he said but it is probably over 20oz + mount. He said the bipod and arca added 1 pound also.

@PrecisionRifleNetwork Жыл бұрын

@@rpk5250 sorry for the delay...reference what Jacob said. that's basically my answer.

@kangwankhottawong8586 2 жыл бұрын

Is it possible to put 338 LM barrel on this chassis?

@buglechaser 5 ай бұрын

So where is the "ultralight rifle" at? 10+ lbs is nearly double what an ultralight rifle actually is.

@PrecisionRifleNetwork 4 ай бұрын

Each to their own. Definitions vary. I think most would agree that a sub-10lb rifle is pretty lightweight.

@ninjasquirrels 3 жыл бұрын

I know, I know - I’m late to the proverbial party but; What height of rings are those? Reason I ask is because I’m building the same rig 😏🇺🇸

@PrecisionRifleNetwork 3 жыл бұрын

I believe these are the Medium height. Here's a link. www.midwayusa.com/product/1092789250083

@PrecisionRifleNetwork 3 жыл бұрын

If you went with a 56mm objective diameter scope, you might need the High version.

@ninjasquirrels 3 жыл бұрын

Precision Rifle Network I was actually looking for a scope and just happened to catch your video DIY build series because it was “recommended” - the algorithm works, I subscribed right away 😏. Thanks for the good scope option for my build since they’re VERY similar...I just got the exact same LSS chassis and stock as your build but I’m going with ARC Nucleus action, ARC rings and bought the trigger from them too...it’s my first DIY build and I thank you for the heads up on the scope rings 👍🏻

@PrecisionRifleNetwork 3 жыл бұрын

@@ninjasquirrels awesome! Thanks for subscribing. 👍