How To Tell If Your Mass Air Flow Sensor Is Bad On Your Car

Рет қаралды 7,582,754

proclaimliberty2000

7 жыл бұрын

Auto repair shops hate this video. If your check engine light is on you could have a bad mass air flow sensor. MAKE SURE YOUR MASS AIR FLOW SENSOR IS CLEAN BEFORE PERFORMING! You might also like watching • Why Does My Car Start ...
Disclaimer:
Under no circumstances will proclaimliberty2000 be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by proclaimliberty2000 or a third party. In no event shall proclaimliberty2000 be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of proclaimliberty2000, it cannot guarantee against improper use or unauthorized modifications of this information. Proclaimliberty2000 assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Proclaimliberty2000 recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of proclaimliberty2000, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not proclaimliberty2000.

Пікірлер: 2 700

@leokimvideo 10 ай бұрын

So extremely rare to see on KZfaq someone explain something without the fluff and unnecessary drama to make you watch a 10 min video. Give this man a GOLD KZfaq play button NOW. But the sad fact is KZfaq reward those who game the system, weird isn't it.

@bennygreene1421 10 ай бұрын

My first step is clean the throttle body and plate. I have no doubt this can cause the sticky acceleration. Throttle body spray cleaner is not real pricy

@Poopsticle_256 10 ай бұрын

Agree, always like finding simple little videos like this that give me a gist of what to do. Though, in some instances, longer, more drawn out *tutorials* can be appreciated

@TomWis-747 3 ай бұрын

ABSOLUTELY. Straight to the point.

@keithmorrison6176 2 ай бұрын

i can say i learn from this guy he is rare alright.

@JackStrap-dx5gf 2 ай бұрын

Unfortunately, it's not true. Like so much youtube. Now, 20 people watch this and make their own videos, creating more bull 💩

@payparallel Жыл бұрын

Short and straight to the point. No fluff. Thanks

@tsunami770 9 ай бұрын

That is how you do it. No stories, no wasting time. To the point! Thank you... Like has been earned.

@kiethj7 2 жыл бұрын

I have been trying to figure out what was wrong with my wife's Malibu for months. Came across this and I will be damned. Changed MAF sensor on 2011 Malibu and now it's purring. No engine codes. God bless you for helping discover the fix and for helping me save money.

@devinsmith4713 6 жыл бұрын

I'm gonna be 100% honest and say that I figured pulling the cord on a sensor in general would stop the engine anyway. So I walked outside all skeptical, started my truck, pulled the cord and the thing kept running. You win. Thanks.

@samuellanda7701 2 жыл бұрын

I'm going outside.... 🤣lmao

@SamSam-on8dt 2 жыл бұрын

The same here i tried on the 2008 suburban unplugged the car kept running. I bought a new maf sensor installed it unplugged the car kept running. 🤔🤔🤔i wonder do you do this on a cold engine or hot.

@darkmonkeynuada4372 2 жыл бұрын

@@SamSam-on8dt each car work different most of the cars will keep running other dont...if your car keep running BUT you got all the loss power back and I mean like no issues then provably it is bad / bad groud or broken wire must see wire near connector 🖖🏿

@CROFTY71 2 жыл бұрын

Hey Paul you shouldn't be putting videos like that's up a lot of people will be wasting a lot of of money. I don't know if you're a mechanic. That's not how you test an air flow sensor

@whatisdreup2 2 жыл бұрын

Just came back from my garage 😂 my car kept running sooo? New maf sensor I guess

@ericchadwick2635 6 жыл бұрын

Told exactly what I needed to know and took less than 2 minutes to do it. Bravo sir.

@karenmahan6180 Жыл бұрын

Thank you a million times for this vid. My 2004 F250 5.4, bought new, was having issues losing power uphill and under load at 85K mileage. Took it to four mechanics over the last 1.5 years. No one could figure it out. One told me the truck's engine wasn't powerful enough and that's just the way it was built. Not! I've driven and towed with this truck since 2004 and never before had this problem. The most recent mechanic at a Ford dealer said it was the transmission and wanted to take me down that rabbit hole but I intuitively knew that wasn't the problem. I had already taken it to a good transmission specialist and he found nothing wrong with the transmission. But, then I found your vid and, sure enough, the sensor was bad! $140 cost to replace and I am now driving with no power loss and ability to tow my horse trailer up hill on the Interstate beautifully. Just as it was built to do!

@KatJaguar1122 3 ай бұрын

That’s awesome. Amazing.

@keithmorrison6176 2 ай бұрын

my mechanic told me my cam is broken on my ram and said a used engine would be better, so much bullshit from these highway robbers.

@jwillzcommonsence8870 2 ай бұрын

Dang you found the solution, an still got screwed for 140 ! They cost only 22- 50 dollars great tho

@ChuyPamelaVelka 23 күн бұрын

@@jwillzcommonsence8870maybe if you get aftermarket BS. I ordered a Duralast and it came all mismanufactured and in horrible condition for $99.....I ordered the FACTORY OEM mass air sensor directly from Mitsubishi for $150 and it came in PERFECT matching condition and my car now runs much much much better, almost like new...... 244,000 miles on it!

@lhebernard6607 3 жыл бұрын

You saved me from headaches. I thought my transmission was the problem, the dealer told me I needed a new fuel pump, and my brother said I needed a tuneup. After watching your video I tried it out on my car, found out it was the MAF sensor, ordered it and my car works like a new one. Thanks!!

@richdriver9322 2 жыл бұрын

I I a 2nd 3535erq5q33q444

@creolecajun7750 2 жыл бұрын

The dealerships will scam the scrap out of u

@Gawddess 2 жыл бұрын

Did u install it yourself?

@jimmyfale6370 2 жыл бұрын

Does this work for all cars

@avery214j 2 жыл бұрын

Also unplugging the mass air flow sensor while the car is running on some cars will cause the car to go into a test mode and then u may have to see a mechanic to get out of test mode

@edwinhernandez9276 3 жыл бұрын

Another secret that Dealership auto mechanics dont want you too know . Thank you !!! 👍👍👍👍👍

@arthardwick 8 ай бұрын

Wow..! tried exactly what you said step by step.. it fixed the car, I couldn't believe it at first. so we tried the experiment again, same result-- this repair saved us hundreds!! Thank you for taking the time to post this video!

@ymustubother Жыл бұрын

After spending 700+ dollars on ignition coils plugs and wires I found this video. I was at wits end. Thank you for being so to the point and concise.

@AR777bomb Жыл бұрын

So it solved the problem?

@Ron.Swanson. 2 ай бұрын

Well at least next time you have a problem, you can rule out all of the things you replaced lol

@JohanAguilar-kk9sp 2 ай бұрын

Fr i did the same i replace all the spark components coils, plugs, fuel injectors, valve cover, and fuel regulator and still threw a cyl 3 misfire. Got the sensor and ran better than it ever did made the light go of. P0303 code gone @Ron.Swanson.

@JohanAguilar-kk9sp 2 ай бұрын

Don't really mind throwing parts at her I'm gonna keep her forever

@Ron.Swanson. 2 ай бұрын

@@JohanAguilar-kk9sp I replaced my MAF the other day after doing googling for 3-4 days on why my 4Runner was not accelerating well when I was pushing on the pedal. It seemed to have fixed the issue.

@codymarshall7364 2 жыл бұрын

Thank you so much. Saved me alot of money! My car didn't have a check engine light but watched that video and got my car running great now

@sugar1756 7 жыл бұрын

Thank you for this for this quick simple video. I ran a code saying my CAT was bad & my mechanic said to change the MAF first. Your video confirmed that the MAF needed cleaning/change. Thanks again

@Skirky70 Жыл бұрын

Easy to clean?

@JoeLazzara 4 жыл бұрын

Hey thank you very much for posting this video. My check engine light has been on for a few days now and I just did this test and confirmed that the mass air flow sensor is bad. You're right, it was very easy. Thank you again for posting this video and showing us how it's done!!!!

@salvatorespalato3503 3 жыл бұрын

Hi my car was stalling at stop lights and I unplugged the mass air flow sensor plug and plugged it back in again and now my car is not stalling anymore 👍🏻🇦🇺 thanks so much for this video.

@marianoonan7257 8 ай бұрын

im impressed by how you explain something like this quiet simple without any nonsence and taking ten minutes to do so ,, so well done , i would think you would make a good doctor or teacher of any subject in front of a classroom of kids

@pablitoeleman 6 жыл бұрын

Awesome man spent 190 dollars at a corner shop and couldn't find the issue on why it idles roughly, I should have started with KZfaq to find my issue myself. I came across your video third video from The View Bar I tried it and that's exactly what it was. From now on I'll be diagnosing my own car using KZfaq

@proclaimliberty2000 6 жыл бұрын

Also make sure your throttle body is clean. kzfaq.info/get/bejne/mbVxjLqHp8zZlZ8.html

@Shannon_luvscars 6 жыл бұрын

I did this because I found your video... I think you saved me $600 because I was told it was my computer!!! Thank you!!!!

@434ranch9 5 жыл бұрын

Same here

@CarlosHernandez-ej7hh 5 жыл бұрын

You are gorgeous😍😍😘😘🌷🌷😊😊as simple as that.😅😉😊

@iceburg_jones9887 5 жыл бұрын

Shannon hey bae 👋🏾😉

@vilasgawand7929 5 жыл бұрын

@@iceburg_jones9887 =

@MrVrezh1212 5 жыл бұрын

Carlos Hernandez keep your pants on vato

@leslirenee 2 ай бұрын

I cleaned mine, and it worked for another 5 months, but the problem came back. I performed this test and the engine kept running. Thank you for creating this video! So at this point it is likely to be a bad MAF sensor.

@eduardopaz659 5 ай бұрын

My mechanic is out of State so i have to Rely on You Tube to fix my car/ thank you for sharing this information Sir i appreciate very much 🙏

@epicpooch1861 6 жыл бұрын

This was awesome. Thank you so much. I can’t believe how easy that was.

@centaurus5676 7 жыл бұрын

At last a Video of the simplest form with no bullshit! Keep up the good work!

@princenyc9271 7 жыл бұрын

i know right

@centaurus5676 7 жыл бұрын

Yeah!

@duckdodger24 6 жыл бұрын

Bigstep uk v

@galeprice3276 6 жыл бұрын

Bigstep uk.

@paulbuttler6510 6 жыл бұрын

Bigstep uk very clear and presice.👍

@monteeasterling8743 2 жыл бұрын

THANK YOU...for taking the time to explain this. I am having the exact issue with my auto, this will save me a lot of $$$$!!!

@DrewSolomon 2 жыл бұрын

You are a gentleman and a scholar! I had the good old multimeter out and ready to test it and saw your video, beautifully simple!!

@brandohusb7655 4 жыл бұрын

Simplest explanation. Had to get the obd to find out it was the sensor, but I remember my van not shutting off when I disconnected it. This wouldn't saved me a lot of time and money. Thanks for the helpful tip.

@reydeguerra2807 6 жыл бұрын

Excellent video, quick, and to the point. You didn't do alot of talking. Thank you.

@JDMHaze 5 жыл бұрын

Rey DeGuerra Exactly I love this, I make videos myself and try to do this, because I hate people who run their damn mouth for 15 minutes for a video that could've been 3 minutes

@davidi6425 4 жыл бұрын

I so agreed u and Chris fix the bomb very awesome no repeating yourself or telling storys

@biggur5 3 жыл бұрын

Straight to the point. No BS Nice one mate 👍

@proclaimliberty2000 3 жыл бұрын

👍😊

@DaTruth1017 2 жыл бұрын

Your 2mins video has given me a lifetime of knowledge to share. Yes shared to two friends 👌

@Josh-rv4kv 6 жыл бұрын

Lifesaver! Thanks brotha

@parkerkoppes3009 6 жыл бұрын

Love this video sir. I used it to check my cars MAF sensor. Luckily it was still working. Love the simplicity.

@mattduguid7762 3 жыл бұрын

Just like testing your alternator to test that unplug the battery when the car is running if the car stops your alternator is bad. Great job

@huongyn8808 6 ай бұрын

Wow it works now after 4 years of suffering that low voltage. Much appreciated for your sharing Sir! Have a very merry Christmas to you and all!!

@Ifysta 7 жыл бұрын

Thank you, this is the easiest diagnostic i have ever seen among other videos, would give it a trial and find out !

@grindermonkey23 5 жыл бұрын

thank you for making my day much easier.

@xtremehostilews6769 8 ай бұрын

🤦‍♂️ where was this video when I needed. I had this issue last week didn't know how to test it. Now I know. Thank You.

@andrewesquivel 9 ай бұрын

HOLY BALLS IT WORKS. MY CAR KEPT RUNNING AND IT RAN BETTER WITHOUT THE SENSOR. YOU ARE THE MAN! 2003 MITSUBISHI OUTLANDER

@SophieKiyoko 2 ай бұрын

Don't run without your sensor. That sensor is designed to measure airflow. Yes, your vehicle runs for now, but unregulated airflow will throw off the air fuel ratio, resulting in an offset spark resulting in long-term engine damage. If you haven't replaced it, I highly recommend you do. I'm a mechanic and see this all the time.

@Michaelbrian777 2 ай бұрын

@@SophieKiyokoDoes spraying it with sensor cleaner actually fix it ? Or do you usually have to replace. My ford explorer idle goes up and down only when its real hot outside. It stalled at the light yesterday. Im thinking it may be this mass sensor but thinking why only when real hot outside 90 degrees and not at all in winter or 70s .

@__Yusuf63 Ай бұрын

@@Michaelbrian777 Yes you 100% correct because I'm facing the exact same issue with my W204 C200. Only when it's hot outside my car's idle goes up and down

@__Yusuf63 Ай бұрын

@@Michaelbrian777 Did you clean your sensor? If so... Did it work?

@Michaelbrian777 Ай бұрын

@@__Yusuf63 Yes I cleaned it and changed the air filter. I had a code ran that said my intake manifold gasket needed replaced. So im not sure what the issue was or is. No issues yet. It was stalling and surging when I drove over an hour and it was hot outside. Im not sure yet if its fixed. It never gave me issues around town or any time in winter. Just when its hot like 90s and driving on freeway for a while.

@bobjacobs2 5 жыл бұрын

Ck'd it with my OBD II it said flow restriction. I thought it was the cad converter but saw this video wow! fastest diagnosis ever. Thank you!

@sniperpaintcorrection6790 3 жыл бұрын

Mine is saying p0403 EGR vaccums solonoid . But when I pull this plug it doesn’t shut off

@ArtEatSan 4 жыл бұрын

thank you this was spot and the crazy problem that fixed my moms car! thanks for making such a simple but amazing video

@furkatusa1092 2 жыл бұрын

Simple and easy! Thank you!

@tachizha 11 ай бұрын

This video stands out as one of the finest instructional resources on KZfaq. It wastes no time and gets right to the point. Initially, I believed my transmission was experiencing problems, so I attempted to resolve the issue by changing spark plugs and the fuel filter, but to no avail. However, upon discovering your video, all of my troubles were alleviated.

@davidmacleod527 7 ай бұрын

hi did you have trouble with a shudder noise like miss fire

@user-fx5vk8pi2c Ай бұрын

When you thought your transmission was bad did you also try new brake pads and rotate the tires?

@swooshbaby92 5 жыл бұрын

This man needs a medal, finally a simple to the point video ! I appreciate it my friend

@steelokey 3 жыл бұрын

Lol wtf I just told a mechanic that I tested my MAF sensor like this & he said that’s not a good idea

@gazlp1 3 жыл бұрын

@@steelokey anyone who can make money from you will tell you that. They don't want people to find the easy way around things.

@steelokey 3 жыл бұрын

@@gazlp1 lol right, i found out that was my problem, bought an OEM one cause the one the previous owner/mechanic shop had put in a aftermarket part. 🔑

@courtneysinclair7904 3 жыл бұрын

@@steelokey pl

@mannysosa3608 Жыл бұрын

@@steelokey Pp0lp0

@nickmitchell5568 4 жыл бұрын

Thank you to all KZfaq mechanics. You've helped me out so much. This video in particular was very helpful. Keep it up!

@shawnmcfadden8641 Жыл бұрын

Thank you so much for getting to the point explaining everything quickly that is what makes the videos helpful most people don't wanna set through a twenty minute video with advertising and alot of bla bla bla thanks 👍!!!!

@thomashuskey3531 3 жыл бұрын

Thanks Paul , you're a good dude ! And may God bless you !

@masteryoda7583 4 жыл бұрын

Thank you for sharing this video/info, this is very helpful for people who don’t know much about cars and engines...-like me..I appreciate things like this.

@abibodlogistics 4 жыл бұрын

This video though is short,simple but very informative and educative,thanks for the good job.

@brettplans8024 3 жыл бұрын

Your vid just solved my sputtering issue on my truck, thank you!

@dco956 2 жыл бұрын

Thanks so much.....I've cleaned everything on a 98 Marquis....only ran for 3 second s......I unplugged massflo sensor...,. STARTED RIGHT UP

@TheSpamprincess16 4 жыл бұрын

Amazing test! THANK YOU!

@teamdrizzy4470 5 жыл бұрын

This was real helpful to me thank you

@jokestrotattoos5067 2 жыл бұрын

I was going to take my 2008 Pontiac to a shop to put the mass air flow sensor on a new one and a emission evaporative position sensor showed a leak that I know where’re it is exactly. But the shop wanted to charge me $700 for labor. So I looked on KZfaq. Thank you cuz you saved me money on the mass air flow sensor. And now I have to look at how to fix the gas air leak. It was so easy to put on a new Mass airflow sensor.

@DanielDavies-StellularNebulla 3 жыл бұрын

Wow, after months of trying to figure out what was wrong with my car - talking to and taking it to many mechanics this is the answer I have been looking for. Thank you soo much man, I can now freely go travelling my home country!

@rafaelgomez1989 3 жыл бұрын

What symptoms was the engine giving or just the Check Engine Icon TURNED ON ? TY

@apolokabali7595 Жыл бұрын

All the mechanics had to do was put it on a scanner and read the codes. Some scanners tell exactly what is wrong

@bzeessunshine8309 6 ай бұрын

I have Cx5 2014 sport, 6speed, 135,000 miles, I've had spark plugs & tune up, misfire coil wire #2 changed. Ran well, for two weeks ago, I recently noticed some hesitation & jerking again, upon stepping on the gas going up a hill, was only able to go 5 to 10 miles smh. I ordered the MFA oem part, and hopefully, this will fix the issue. The car has been to 2 garages, totaling $500, and I've heard hope its not the engine or something else from them. Thanks for your video❤

@B_in_Florida 2 ай бұрын

Same story here with a 2016 Kia Soul+. One lone misfire on cylinder #2 code, that never came back. So no codes to go on for 6+ months. Changed plugs, coils, battery, filters, cleaned fuel injectors. Took it to 3 repair shops. Spent $$$$$$! Last shop said maybe it's in Limp mode with no code? Or maybe it's the transmission? Called the Kia dealership twice $200 to put it on the first level code reader, $+++ after that! Kia even said maybe it's beyond repair! 😢 At 133,000 miles!? It went from great car to 40 mph tops, then to 20 mph tops over 6 months. Won't climb the smallest incline. Jerks, rough idle, can't press the pedal down even halfway way or it starts knocking under the middle passenger's side. Barely no forward power, and jerky Fuel economy dropped from 30 to about 10 mpg. Runs best upon starting for the 1-2 minutes between "cold" & "neutral". Doesn't go over 2000 rpm. Seems like it doesn't shift out of second gear. But no codes! Just a quickly flashing oil light after it's been running for awhile, but I've checked the oil dozens of times & it's always full. A lot of weird symptoms! I'm gonna try this MAF test & see if it's that!

@mattguymon4444 7 жыл бұрын

This video saved me! My car didn't do exactly what he said but it gave me my diagnosis

@listenlearn5445 6 жыл бұрын

This is a great job of getting to the point and creating a detailed and concise solution for the average person. Thank you so much.

@iamshango3005 Жыл бұрын

Go f yourself. U dont care about me or my family. Listen to urself.

@JP-cy1lw Жыл бұрын

And thank God it was not filmed in Nerd Vertical!

@bennygreene1421 10 ай бұрын

Can either of these cause a surging? MAF sensor One bad plug wire clogged catalytic Converter? I don't have a Check engine light on.

@martintopp1399 Жыл бұрын

HI from NZ. Thank you for sharing this short but very helpful video. I'm going to test my daughter's car for this problem. Thanks so much!

@edfarmer9707 3 жыл бұрын

I agree with the comments, good video, I would like to add one detail if I may. Another option is to purchase a can of MAF Sensor cleaner, and I only say this because some of those sensors can be expensive. I've had excellent results with the cleaner, and no disrespect intended to your video.

@user-tb2wz1tr8y 3 жыл бұрын

Agreed. Usually a simple cleaning does the trick. Not always, but it's good maintenance to do. At a minimum, it can extend the life of the MAF.

@nicholasjr.2315 2 жыл бұрын

WOW I have now gone through 2 and prob 2 hours of research to have you simply unplug it... Your on point. MILLION DOLLAR QUEST. For both of you Scholars, if the engine doesn't Is cut off and still runs which would means my sensor's bad, I could still possibly clean it to salvage it??? I did try to spray a bit of cleaner but still the same problem, any further suggestions aside from the basic spray cleaning? and the mi

@sandippayal850 2 жыл бұрын

@@nicholasjr.2315 Egg

@benitojuarez1695 7 жыл бұрын

Great information,thank you so much.I unplugged this sensor and was worried about if vehicle would reset itself,so it's 20 mile's.Thank's again.

@joedemariano6193 6 жыл бұрын

Benito Juarez v

@79ZAPPER 6 жыл бұрын

Benito Juarez iiii

@johnmarksmith1120 6 жыл бұрын

Thank you sir. Succinct and to the point. No fluff, only concise, usable information. Subscribed.

@tonyaflaherty5872 Жыл бұрын

Thank you so much Auto shop said transmission was bad. I came home and changed plugs, battery and tried this. It kept running so ordered a new one and air filter.

@dianarosado2536 3 жыл бұрын

By the way love your video, u made it simple & to the point & I'm sure you saved a lot of ppl money...

@1231adalberto 5 жыл бұрын

YOU ARE THE MAN!!! I have trouble to figure out if it was the MAF or something else... i did it and my car keep running as u said so my MAF is bad... thank you a lot....

@gingerwallets8000 3 жыл бұрын

did you replace it yet and its working?

@Piercemxpx 3 жыл бұрын

@@gingerwallets8000 2 years later lol

@gingerwallets8000 3 жыл бұрын

@@Piercemxpx hes no better not replying to me and its already been a week pft how rude

@876inc 3 жыл бұрын

If the car keeps running does it always mean the maf is bad?

@countryboyvlogs4660 3 жыл бұрын

Mines kept running today thanks also

@vijaysundar5250 5 жыл бұрын

Simple and best solution.. awesome

@1msm352 15 күн бұрын

Thank you so much for this video! I'm glad I believe in doing my homework before just going to dealerships. Check engine light came on Friday, had the reading done and it came back as the MAF sensor needs replacement. Did this check on Saturday and my car kept running yet acted as if it was going to stop but kept running. I cleaned both my sensors with CRC MAF Sensor Cleaner. Drove it around today and my vehicle rides and idles sooooooooo much smoother now! I sure hope this cleaning resolved it and I don't need to buy new ones. Again, THANK YOU SO MUCH!!!

@user-zk1hv7mk9v Жыл бұрын

Great job on this vid mate. Good info without all the fluff. Thanks 👍

@GeirSkau-rv9ye 7 жыл бұрын

god bless you my friend you just made my hollyday. thanks a billion

@Awesome-Jackson 7 жыл бұрын

Simple and straightforward. Thank you. My Volvo S40 needs a new Mass Airflow sensor

@amana1480 5 жыл бұрын

Hello I have a volvo S40 too. What symptoms were you getting and did you fix the problem?

@happycat0411 4 ай бұрын

Very nice. Simple and straight to the point! No fancy diagnostic tools needed! Sometimes just diagnosing the problem is the hardest part! Wish I would have know this last year but MAF sensor wasn't too expensive for my 2002 Rav4. Only about $32 off Amazon!

@BeADad2447 Ай бұрын

Awesome! Short and to the point! No acting or wanting to make a movie!

@Aksankhan 5 жыл бұрын

Great information. God bless you and thank you for the sharing. Greetings from Pakistan

@Warren1814 4 жыл бұрын

I absolutely love this test.. I just wish my MAF sensor was in a easy place to reach so i can perform this test.

@reubenkaseba5712 3 жыл бұрын

I just tried this on my 2003 Audi A6 2.4 and the engine din't go off. Thanks a lot, mechanics would have charged me an arm and a leg for this. Truly appreciate it.

@yamaha9185 3 жыл бұрын

Did you get a new one ?

@Joesworldttv 3 жыл бұрын

Great video. I have watched countless videos, and this one is directly to the point.

@miguelvelez5840 7 жыл бұрын

Great instructional video, simple and straight to the point.

@AUSTINPOSTELL 5 жыл бұрын

Hey dude thank alot for make my this. You're cooler than Eskimo fingertips.

@antiscyllisneocht5669 4 жыл бұрын

this comment rocks

@bradthemechanic978 3 жыл бұрын

Yeah yeah you're like like super cool dude get it like super cool

@junesantos543 3 жыл бұрын

Thanks for sharing the experience.. Simple but Helpful & Time/Cost Saving

@pattriyajessalynphanomyong Жыл бұрын

Thanks for the video. I had this same problem with my z4 e85 three times already within a week. The mechanic did mention last Jan 2023 that it may go bad and to replace it but mind as well clean the MAF first to see results. After cleaning it, all was good until just few days ago and today, I started to have that same problem and this time it went dead on the road. Had to park on the side to restart the engine again.

@bloodofaenslavedheartofaki1136 5 жыл бұрын

Straight to the point and very simple keep up the good work Good video

@Jimbo7303 5 жыл бұрын

Thank you for the information, it worked textbook perfect! I changed mine out on a 98 Honda Accord and it fixed it. Back on the road! Your video was short and to the point, not confusing. Appreciate Ya!

@youngjj757 5 жыл бұрын

did u experience any car symptoms before u changed the maf sensor...

@Jimbo7303 5 жыл бұрын

Yes I did , it was running very rough as I was driving down the road. Acted like it was missing and was going to stop at times. That fixed it. But if that doesn’t fix your problem it could be another sensor.there are quite a few of them that could make it do the same thing.

@xinixxagnix201 3 жыл бұрын

@@Jimbo7303 98 it works, but after 2000 no more so this test is for older cars, use live data and you know for sure what the problem will be.

@daveyfadess Жыл бұрын

Damn. I just went outside and unplugged everything on the airmass censor and its still running. You might of just saved me. Thanks

@kstv942 3 жыл бұрын

Thank you for this video....please keep on educating us...👏🏽👏🏽👏🏽👏🏽

@itsjustjae85 5 жыл бұрын

Thank you so much for this, you saved me about $500!

@rafaelxenes2034 2 жыл бұрын

I was amazed that my terribly running recently purchased 07 pathfinder stalled slightly but kept running. Does this definitively mean that the sensor is faulty? That would be an amazing quick to a problem that’s been taking too long to figure out. Thanks for the awesome straight to the point video.

@marcinsalaga5775 Жыл бұрын

The best video, straight to the point, no talking bull....t.Thanks.

@haroldo5889 2 жыл бұрын

This is very well explained and it is important to know this also sometimes you may not need to replace your MAF Sensor so you can buy a special Mass Air Flow Sensor Cleaner which is a spray and spray the metal wire part of it, you can watch videos on how to clean MAF Sensor.

@solam Жыл бұрын

If the car doesn't turn off your maf sensor is bad or the connector is bad if u have a rough running engine when the sensor is connected cleaning it might fix it but if the engine doesn't stop at all when u dissconnect the sensor then your maf sensor is bad Because maf sensor cleaners clean the sensors and they work only if the sensor was already sending signals or working poorly atleast If you pull the connector and it turns off then the sensor is working "even if it was working poorly it would turn off" It will stay running if the sensor is bad This is my thought about maf sensors if anyone thinks that am wrong pls correct me 😁

@DekGT5mad Жыл бұрын

The idea of Mass Air Flow Sensor cleaner is not to fix a faulty MAF, it's to KEEP IT CLEAN so it doesn't crap out. Another sign of the MAF being dead is the car running rich, and I mean halve your fuel economy rich, blowing fuel smoke by the bucketload and getting worse as the throttle is opened more. Plugs often foul and cause misses within 50miles or less. Contrary to popular belief due to a "Pimp my mum's car" kids show from England, check engine light doesn't necessarily just mean a faulty O2 sensor! 😂 😂 😂

@lifeinwallawalla6271 7 жыл бұрын

Your a Genius! Thank you.

@alfesta7351 5 жыл бұрын

dude you rock honestly cant believe it was that simple but it worked thanks

@tonynguyen2117 2 жыл бұрын

I bought the same exact denso from Amazon for my 2003 Corolla with 150k miles works awesome just installed it yesterday

@Mr.Steve-O 9 ай бұрын

I am gonna try this, so simple but effective. I did clean my MAF last night. One side was black and the other was amber, now after cleaning it, the black side looks better, but I am not 100%. I think this little test will tell me more . Thx for posting this one !!

@etio805 Ай бұрын

Hello sir! I have samae problem in my car. Can I know did it work after you clean your MASS airflow sensor?

@Mr.Steve-O Ай бұрын

@@etio805 I replaced the MAF, which took 10 minutes, very easy to repair

@billydee4022 3 жыл бұрын

i pretty sure my two cents wont matter,but why cant all or even most diy videos be this simple.you are straight to the point.thunbs up my man.

@crocpa Жыл бұрын

Watched a guy in another video drive through town with a computer. Total waste of time. Thanks for the easy to understand concise and to the point video.

@abc33944 Жыл бұрын

my st220 started cutting out i changed the coil pack and sorted a loose vacuum pipe which sorted the erratic idle , but now the car idle started diving and wanted to cut out whilst on the run. I just did this test and found the car was still running after removing the maf connection... so im buying a new one ... thanks for your demo sir!!

@worlddelights 3 жыл бұрын

1.7k Dislikes for such a short helpful vid?? 1.7k mechanics must not have appreciated you sharing the valuable secret.🤑 Thanks for taking the time to help people same money and time!

@jlcastille9017 3 жыл бұрын

That's because this video will cause viewers who are inexperienced to misdiagnose the problem. This particular vehicle may or may not represent a small percentage of engines (or it's a very old model without O2 or MAP sensors) as most engines WILL CORRECTLY NOT KILL the engine when the MAF is disconnected (I haven't seen an engine that would die regardless if the MAF was good or not). When disconnected, the ECU will go into a default mode where it will rely on other sensors such as the MAP and upstream O2 sensor (A/F ratio sensor on newer cars) to calculate for a 14.7:1 air/fuel mixture and continue to run. Apparently, "Proclaimliberty2000", is not a mechanic and will cause more problems than help and was wise to add that long disclaimer. He may have good intentions or may be deliberately screwing with people; I don't know but I have nothing to gain by advising that no one trust him when it comes to engine diagnosis. In this day and age, four things are needed to reach a 100% absolutely correct engine diagnosis (although less will do in some cases). Those are: 1.a scan tool that is able to read live data and display freeze frame data, 2.an oscilloscope, 3.the factory car specific service manual or access to your vehicles specifications/values for parts that may be causing an issue and 4.at least a general understanding of the mechanics and the CAN Bus OBD II system that exist in all vehicles today (OBD II codes are the same for all car manufacturers, unlike the older OBD I systems). Hopefully, you'll at least watch a few other videos. You can't trust the first one you watch on You Tube without sometimes regretting it or worse, creating more problems. Good Luck!

@jlcastille9017 3 жыл бұрын

This is a short 2 minute video (I have no idea who the channel belongs to nor do I have anything to gain) that advises if you have an issue that causes your vehicle to start, then it stalls; disconnect the MAF. If that corrects the problem and the vehicle continues to run with the MAF disconnected, then the MAF sensor is bad and needs to either be replaced or in some cases, cleaning it properly and with the correct cleaner (MAF cleaner, electronic cleaner, brake cleaner, etc) may correct the issue. The reason is that the bad MAF sensor is sending incorrect data to the ECU but by disconnecting it, the ECU can't use the bad data (either very lean or rich condition/engine needs a 14.7:1 A/F mixture to properly combust) that is causing the engine to die, so it then relies on other sensors. Hope this explains the many dislikes here and helps. kzfaq.info/get/bejne/g5edYNFm197Zgac.html

@errolwalters7918 5 жыл бұрын

Great video man. Definitely helped. No messing around and useless information.

@persianchris2451 3 жыл бұрын

Amazing!!!! Thank you SOOOO much for this!!!!

@loveyourtime4143 6 ай бұрын

Ive never subscribed to a channel so fast.. straight to the point❤

@miguelnunez9685 4 жыл бұрын

This is the best money saving video ever THANKS SO MUCH

@wyliejones4260 7 жыл бұрын

Check eng light came on a couple days ago. Just came across this vid i'll check it out when I get off work. Thanks for the tip.

@proclaimliberty2000 7 жыл бұрын

You might also want to watch this kzfaq.info/get/bejne/qLuSe8Kdm7OooKc.html

@peterswanepoel2807 2 жыл бұрын

You realy make great informative videos DONT EVER STOP

@susanenglander9977 2 жыл бұрын

Thank you!! NOW I can ask all the right questions.

@TheDazza2 5 жыл бұрын

Hi Just tried this on my old bmw e36, and sure enough, it carried on running!! so job for the weekend is to clean the sensor first before i order a new sensor! thank you so much Paul! Happy from the uk!!