Love these videos,was having real problems downloading chirp…. but now I can put in repeaters etc no problems

Thank you so much, got my 10 year 0ld Icom IC-2200H on the air after setting in closet for over 12 years because I could not understand the owners manual for programming.

Thank you! Very helpful video for someone brand new to CHIRP...Cheers!

Your video came perfect. I'm a M6 .. had a stroke and completely trying to rebuild myself up again and oddly I couldn't recall how to prog my radios ! With my local club (Stockport) being closed due to covid I'm quite alone lol... anyway.. Thanks.. I'll thumbs up and Subcribe too!

Does anyone know if you can program and store/name FM radio stations via chirp as well?

Thankyou you have some great learning here. It made me understand better you explain it well cheers

Thank You Mike for that video !! thats help me a lot.

Good stuff Mike. Nicely explained! 73

Brilliant video thanks for your help

Excellent video. Thanks

My question is how to upload my pre programmed Bao Feng frequencies and then transfer them to a new TYT HT-7800 I received in a raffle.... I was able to upload to the Chirp but then when trying to transfer those to the TYT radio the 'radio' is greyed out showing Bao Feng and I cannot change to the TYT HT 7800.... There's gotta be a way though.....I haven't figured that out....

thanks Mike pick up a Wouxun KHG-UV9P and has not a thing on. so download and it is blank. than put all the frequncy that I want to use. than save it. than uoload it back into the radio, do I have it right. been off radio for 20 some years, and wow, technology changed. 73 KQ4CD Paul

Thanks Mike, just bought a Leixen VV898S which works well but the software isn't reliable. Tried Chirp and it works well. Not sure if I can program other features like P1,P2,P3,Time etc as the Leixen s/w should but will use for channel setup. Martin

Thank you and 73 for the video.

Does CHIRP have the capability to import local data to make programming your radio easier? Many of the frequencies published to my area do not include some of the needed bits and pieces (I believe) to receive (which is my only interest currently). Out of the box I receive nothing but NOAA that I manually put in. Thanks for your help!!

Thank you it was fun and very interesting to use

this was very helpful, thank you

Hi Mike, I'm trying to programme repeater GB7ZE into my UV-5R and I'm stuck on the how to find if a tone setting is required? I've looked at the repeater details on Repeater Book and it says CC3 in the Tone column, how should that be entered when programming with Chirp, thanks in advance for any advice.

Una pregunta, programe un radio baofen bf 888s solo le cambien la frecuencia de el cabal 4, no le hice nada mas.. pero al poner el canal 4 se prende la luz verde como si estuviera recibiendo señal y se prende y se apaga intermitente aveces se queda apagada aveces se prende, que podria ser??? Y otra duda hay frecuencias que le quiero poner y no las acepta, debe de seguir alguna regla al momento de elegir una???

I'm trying to program 155.550 FM with a CTCSS PL Tone of 179.9 into my BTECH GMRS V-1 using CHIRP. When I do, all I hear is a bunch of garbled unintelligible noise when the station transmits. What should I have my Tone Mode, Tone, Tone Squelch, Cross Mode, etc set to in CHIRP? It sounds like it might be encrypted, but Radio Reference says otherwise. Thanks, Matt :)

I purchased 4 GA-2s radios. Should I program all? & also, where is the link below as you stated?

Thank you Sir.

Thanks. This is helpful. When I use the Radio/Query Data Source/RepeaterBook option it displays the list of repeaters but doesn't include the offset frequencies. This is possibly just a bug or maybe I'm doing something wrong? Cheers (Sub'd)

what if the COM channel has no drop down selection? how do you determine the PORT?

Excellent ! Thank you

i cant figure out what override range perimeter means or what else i can set it to.

all i want to do is reset my radios. someone programmed them and now i have two sets that can not communicate with each other. I have archsell and I have downloaded CHIRP and the cord driver. I am still clueless.

Great video, thanks

Boa noite! O CHIRP não abre o menu settings no meu UV-5R. Pode me ajudar por favor? Ele fica todo em branco.

really interesting , thankyou -

Excellent, thank you and Subbed

Hey there, If I have a series of repeater frequencies and they have a tx and rx- offset and the way that these series of repeaters is set up is: there are 'tone districts' in other words, the tx and rx work on many different coloured repeaters and the tines are only a set of 6 districts. so we set channel(frequency) then we switch tones depending on which district of the 6 we are in. Question: how do I program the Baofeng uv82 in the freq list as it appear I have to assign a tone for each freq? is there an area where we store another bank of 'switchable tones' as for use in this case and leave the associated tone filed in the feq list blank? thanks so much!

Thanks for your video. Can you tell me if the 'memory' in Chirp is the same as 'Channel' on the radio? This means when I program memory 1 in Chirp, I can access that frequency on Channel 1 on the radio. Is that correct?

Great newcomer howto

Hi Mike this video was a great help to an oldie. but how do l transfer a RSGB csv repeater list into chirp? Forgive me l have understood all but do l print out a copy and hand input each channel as you have shown. Thank you.Alan GØNCW.

How will this work if I'm in Panamá???

I want to download the channels from one radio and set them in the new one. What do I put in the space for port??

Thank you

I have the next generation Tidradio H8. When I try to upload my frequency list I get this error message > unable to upload file. This is a radio- independant file and can not be uploaded directly to a radio. open a radio image (or download one from a radio) And then copy/paste items from this tap into that one in order to up load. HuH? what radio image? where do I get it from this H8? I am connected to the radio via a tidradio cable. the radio is selected in chirp. all looks good except for this error. Please help. Thankyou

Hello. I have a boajie bj-218. It cannot be recognised by chirp in the recommended file. What can I do to remedy this.

In Chirp which is the input columns and which is the output column?

How to program a new device that doesn't appear on the device name list. Like the baofeng c50 model. thanks

This WILL NOT work on my UV82. I have tried and made sure the drivers are installed. It simply will not programme no matter what. I can input the frequency but it just keeps reverting to original. I cannot find any way to reset the radio.

Thanks for this video! I have a question, can I extend my connection between two radios Boafeng UV 9R with this CHIRP programing?

If the transmit frequency needs a PL do you put that under the tonesql?

How do I know what frequencies to put in or channels to put in I'm in Washington DC in the United States can you please help

Be nice if you could see the video in a larger screen

Where do u find out what channels are what for my area, southwest, Florida,USA ??

Thanks

Will this same technique work on radtel rt-495?

Hi Mike will this program work with an Icom IC-F1000S hunting radio

Hi is there any way you can make is so you can just listen to the channels thanks

Hello, I have a POFUNG P10UV and I cannot find the software to program it. Is it possible with CHIRP? what dou you recommend? Thanks.

Why do you use FM for 2/70 but NFM on PMR?

Chirp is not allowed me to put 7 characters long, only 6. Why?

Hi I am very new how do I get the channels for where I live . There is no gt-3tp on the list

this will not work on windows 10 or I can't get it to download for a tyt th9800

Hi Mike, I am having a bit of an issue with this one, downloaded various versions of Chirp to my MacBook Pro but when I search for CRT Micron it is not listed in the dropdown box. Any ideas or help would be appreciated. 73's Stan M7MGP

What about input and output frequency?

🎯

Not able to upload to radio .

Can I get download link? Do you have Facebook account ?

I have a QSP5888UV_S1 and no luck, help please!

How do I turn off transmit?

I manually programmed all my channels. But I save high power and it always goes back to low. I save dcs on transmit and receive and it goes back to off. With the chirp software can you program all settings like I mentioned? Any reply appreciated cheers from Australia

You sound a bit Scottish.

Thanks , Gus wd9gus