Another fantastic video. You seem to have a feel for the metal and your templates and jigs are so well done. Really amazing work!

Wow! I know you describe yourself as a beginner, but seriously, that is some of the best metal working I have ever seen. We are all very lucky to be able to follow your project. Very well done.

Amazing, stunning piece of work, and the buck process was such a good way to address it

Great skills, love your channel.

I'm so impressed by the way in which you managed to construct such a complex panel. I know that it is very difficult to master the use of an English Wheel. Thank you for another excellent video.

You are an artist! This car will have a level of perfection it never got from the factory!

I like this perfectionism in work

Amazing work and really enjoyable way of video editing, one of my new favourite channels to watch! Keep up the good work!

That was a work of art mate .......watching that !!........absolutely brilliant fabrication and skills !

Man, stunning work again!!!

Amazing work congratulations!Perfect metal worker!

The quality of your work is exceptional the way you transform a flat sheet of metal is an art it's a pleasure watching your work thanks for sharing from Melbourne Australia

Impressive work!!!!! So niece to follow the process!!!

Amazing work and I am super impressed with your enthusiasm and dedication

My dad used to drive us out to a grass airfield in middle Georgia in a metallic blue Opel GT. My brother and I were just small enough to share the front seat. Think it was around '86-87. Our favorite part was watching the headlights flip before we got in the car and headed back home. I remember the setting sun covering everything with oversaturated warm light, all the analog interfaces in the car and the sunset combining to make an impression that remains with me to this day. It may have been interpolated a bit over time, but at the center of it all was a beat up Opel GT.

Wonderful job , skills, finding a way to do things, accuracy, ... Congratulations! I enjoyed every second!

Not many people are able to do this,I am very impressed

I love watching your channel and admire your workmanship and acquired skills ...

Incredible to see you doing. your magic. It must take a lot of time, energy and ambition to do such work. Waiting for the next video!🎉

Wow - Never saw such a perfect work 👍🏻 Awesome video Following now 🤩 Greetz from Germany 🇩🇪

Congratulations for the way you solve each and every problem the car throws at you. It was nearly in ruins, and you able to fix it.

After putting all that work into the deck lid, I'd be really tempted to turn it into an actual trunk/boot! This is an amazing job!

Man, the level of metal working here is next level. Given that the factory had molds for pressing the panels into shape, you are doing excellent work making bucks to ensure the form and shape remain proper. Excellent work. Can't wait to see this car finished.

that Sir......is a thing of Beauty... nicely done

Great work! 👏👍

Hienoa työtä. Ja loistava työnjälki👍

Great work! Thanks for the inspiration

My first employer in car sheet metal told me: if you can do it without special tools, you can do it later with special tools. He was so right. It has brought me so much knowledge over the years. With you all those beautiful tools give faster and better results. You do have to know what you are doing, even with special tools. You have my compliments. Mein erster Arbeitgeber im Bereich Autoblech hat mir gesagt: Was man ohne Spezialwerkzeug kann, kann man später auch mit Spezialwerkzeug machen. Er hatte so recht. Es hat mir im Laufe der Jahre so viel Wissen vermittelt. Mit all diesen schönen Werkzeugen erzielen Sie schnellere und bessere Ergebnisse. Auch bei Spezialwerkzeugen muss man wissen, was man tut. Du hast mein Kompliment.

It’s really a great job, I’m amazed. I restored a GT myself 20 years ago, you can’t count the hours, but it’s rewarding when you’re done. Congratulations.

Just blown away by the quality of your work. My GT had body work and paint done a few months ago, and the bondo has cracked in several places, which I'm really irritated about. i wish the people who worked on my car put as much care into it as you're putting into this GT.

This panel turned out really good. Large panels are very hard to bend and shape properly. Nice work!

Amazing craftmanship. Well done👍👍

Bloody hell mate...you're a genius!😃 I'll bet you'll never sell this Opel, I know I wouldn't. Loving the content and music, bravo!!!.

"Opel fahr'n is wie wennste fliechst" (Riding an Opel is like flying) I remember an old Ad in TV... Man, You are "flying" with a Fragment...but Bit by Bit ❤ Keep on rolling ✊👍

Wieder eine hervorragende Arbeit. Ich bin froh, den Kanal gefunden und abonniert zu haben. Es ist schön, eine so wundervolle Arbeit begleiten zu können. Freue mich schon auf den nächsten Teil und hoffe sehr, dass nach dem Opel GT Projekt noch weitere Folgen werden.

That's me fully up to date, just remarkable work.

What a fantastic work! Wow!!!!!!!!!! Fantastic videos!

I can't tell you how grateful i am that you are doing this Video series. I am on the verge of buying my first Opel GT ever - a `71 from the US. There isn't nearly as much work to do as you show here, but everything you do is so well documented and shown that i can take your videos as a guideline! If you wish i can update you :) Many regards and best wishes on the project from germany!

IMPESSIVE! You surpass yourself in every video. Really amazing. Seems like you have metal for breakfast....

I’m not sure how this came up in my feed, but I enjoyed the video. I did auto body for 20 years and I can say that I am impressed with your skills. I’m going to subscribe and follow you because I always enjoy seeing a knowledgeable craftsman do his art. Although, I don’t miss working as an Auto body man, I sure can appreciate the skill that goes into it. Best regards.

Love watching your videos - specially cause i am currently restoring a 1970 GT. Keeps my motivation up, that mines not that bad. Not skilled enough to perform this metal shaping, so buying new body parts - but these are quite expensive.

You make it look so simple, which it is not, Champ

I enjoy you Videos, great job. I hope your videos will be go until episode 100 ;-) Thank you.

Hey Really enjoy your videos , and a big applause for your craftsmanship, although you try to hide it at the English wheel 😂 both the feel at calmness shows in these vids , you are doing a heck of a great job and keep it up 😉 all the best from 🇩🇰

Mad Skills. Keep crushing it.👍

Mine has very similar rust and "repairs", but hopefully I don't need to re-create the window seal. Great job, with the panel!

Love the style of your videos. And did you know, the car restoration scene have some real Jedi knights? You are one of them!

superjob wel done🛠🛠👍👍

👍👍👍 Grüße aus Österreich. Hervorragende Arbeit.

Wow that was amazing You’re a genius 😮😮😮😮

you sir.....are a genius....bravo 👏👏

Love the purple!

Hienoa duunia👍 hattu päästä , hämmästyttävän yksinkertaisilla työkaluilla pystyy peltiä muotoilemaan. Opel aihio mistä teet on kyllä aika hurjasti korjattu aikaisemmin. Tsemppiä duuniin tallille 👍

Very nice work!!!

Because of the frame in the trunk you could make little doors there for storage or amps, things... what ever. To give the interior a custom look.

you're a natural!

Superb work 👍

Awesome job esp first time!

Impressive, man !

Super King=Super jobb!🏆🏆

Kanalı yeni keşfettim,sizi Türkiye'den izliyorum. Gerçekten mükemmel bir işçilik ve yoğun emek var. Yaptığınız işe saygı duyuyorum. Kanala abone oldum,iyi çalışmalar diliyorum 👍

Great Job !

Excellent work. I find it very encouraging. Glad I found your channel. God bless.

super toll gemacht...

Bravo Sir!

Brilliant!

This is easily the best project i been following so far. Your skills and methods are surpricing me every time. Keep up the good work. Where in Finland are you? Greetings from Vaasa.

An instructive video on English Wheeling is Dominic Chimea. Very good work, by the way. You might have been quicker to make a replica of a GT rather than repair!

very nice work! Please note the panel is curved to the inside on the tailing.

Magnifique

Wow, for the first try with the English Wheel, this seems to be quite a masterpiece to me. But i understand you´re not completely satisfied with the result. It´s a complex shape with many different sections. And if it somehow doesn´t look like the original factory shape, you would be annoyed for the next 30 years. You know it, you´ll see it. Every time. The rear end of many cars of that period is so iconic, it has to be perfect to your eye. Everything else is not acceptable. So don´t hurry. I guess the viewers are very patient. By the way, that idea with the subframe is awesome. Reminds me on those Italian Superleggera Bodyworks of the 50s and 60s. And because it´s German car, i´ll not say "Keep on". Instead you´ll get the German "Weiter so!" 👍

🤩🤩

I like your video skills it probably take you more time to do your stop motion than it takes you do do your body work!

That jig fabrication was the key to a very complex problem (and a complex piece of sheetmetal). Nicely done!! But what a lot of preparation for .51 sq. m. of panel. I am deeply impresses with the low amount of hours you have into a very complicated restoration. PS. What was/is your occupation? You seem very comfortable around machinery.

Durch Zufall bin ich auf den Kanal gestoßen. Sehr interessantes Projekt. Aber eine Frage habe ich doch: Wäre es nicht besser die Karosserie zum Sandstrahlen oder Tauchbad zu bringen statt jedesmal einneues Problem zu finden? Liebe Grüße aus Hamburg!

Super ☺

Is it possible to send me more informations about time counter? Thank you!

👍❤

hemmetin komeaa työjälkeä.....ammattimaista👍

👍👍👍😎😎😎kool

When Opal was choosing this design there was a much more modern looking alternate. Sort of a Guigario design. I remember when they selected this poor attempt to mimic that year’s corvette.

Wahnsinn!

Verry god jobb

So the car was partly made with soldering, at least on the rear end. Or it was done during repairs, the cheap ones I guess.

I know u looked for a car which is not in perfect shape because you wanted to make videos of the restoration. But did you expect this huge amount of work , that you have now?

Very nice bit of work there .