I wish there were actual plans and explanations for those of us who aren't that experienced with carpentry. A voice over actually explaining what you're doing and why would be helpful. It's a really pretty birdhouse.

That washer trick was pure gold. Thank you for that.

Awesome Bird house. Nicely done.

That is quite the bird house. You got quite the finesse on that table saw. Amazing. The Lord has given you great skills.

The video is good but without the plans, I will not say this is a good build.

I love bird houses, and this one is beautiful, great job , it definitely helps having the right tools for the job...

It is a shame that Mr. Rausch feels the necessity to be so protective of his design. There are two things to keep in mind when building the roof. One is the slope and the other is the overhang. For each piece of the roof, each angle is 60 degrees. The slope (Ruasch uses 5 degrees) you can modify. I used 10 degrees to give the roof more slope. The overhang is based on how large you want to make each piece of the roof. I used 1 1/2 in overhang. Don't be fooled by his slight of hand. It is best to make each section of the roof. After you make each piece, rotate your blade 5 or 10 degrees and then do each side of the roof piece. Fit them together, glue, paint and screw into the top.

Perfect video for what I needed. Thanks. (I like how you plunged the jig saw. ) Well done.

Ice work, thanks for sharing. Full View and Like

cool design, liked your idea with the tape to simplify the glue up

Great project Jason . nice looking bird house but needed some additional info as degree of angles used in sides and roof angles . looks like you teased a lot of us but for the less experianced will need more info so we dont have to guess. help us out especially with roof. thanks

Tedious repetitive 60 degree cuts, done in a way that was enjoyable to watch. I love the design, simple and elegant. That will standout in the yard of the recipient that hangs it up. Especially love the clean out hatch. Great job. Thank you for the video. - Anne

I love it, great job !!

Nice looking bird house. And well made.

Great birdhouse, Jason! I love those little digital angle cubes. That's definitely a must for cutting all those different angles super accurate.

Yep also missed the step on making the roof bevel and assembly. I will have a bash at making one and list the cut list.👍🇬🇧🇬🇪🙋🏼‍♂️

Nice! Great Idea!

Nice! I like the compound angle look.

I liked this one,! Good job

Krásný... perfektní... bravo

That's a very nice birdhouse Jason. Well done.

Awesome bird house!

Very nice Jason!

Great looking bird house. I think I will make one of these in the future.

Love the design. Would really appreciate knowing the angles for the roof.

Great video, can't wait to start making one

Cool bird house. One thing you don't see a lot of is compound miter cuts. Like the washer trick. Oh ya good looking shirt.

Love it all the best john.

- EXCELLENT ! ! ! VERY well done. I like the challenge of cutting angles Thanx 4 sharing.

Beautiful

looks cool, I'm going to try it with pallet wood come the spring when it gets warmer, thanks for the idea

Nice work bud!

Great project and also a great looking project. Thanks for sharing. God Bless my friend.

Nice build Jason.

good job. enjoyed it!

Great bird house.

Very Impressive!

Emeğine sağlık usta çok güzel olmuş

nice jason i have some cedar from the clubhouse i never finished the expansion, think i will make a few birdhouses with the kids. thanks for the inspiration.

I’m gonna have a shot at this ,!,,Many thanks fella,,👍👍👍👏🏻👏🏻👏🏻🇬🇧

Very nice!!!

Beautiful friend I'll make one ty

Good job!

Impressive!

Very nice Bird House Jason, looks really good. Take Care, Barry (from England)

nice project man

That came out really nice, Jason! I really really like it. I need to get more adventurous and try some more complex angles like this so I can mess them up and then learn to do them lol.

Great project there, Jason. I believe I'll be building one of those, that is unless I need a Carvex to build it right :>).

Hermosa 👏👏👏

very nice Jason :)

excellent.. cheers...

just getting into birdhouse building, would like to give this one a try

Bonito trabajo

Nice... Thanks for the video... :)

I have the bird house all done, But the roof. I can't get the angle cut right. Could you please tell us how to do the roof????

Very nice thankyou verymuch

Nice carvex!

Would have left a longer edge on bottom for birds to sit on or baby birds to land on if they fall out of the bird hole....a longer landing....most of the bird house builders don't think of this.....other wise great design! Looks beautiful!

Bravo. Dall' Italia

well done

Good looking hexagon, yes, but entry hole is too big (what kind of bird are you expecting?) - also, birds do NOT require a perch, but predators do. I like your hinged cleanout bottom ...

first of all I want to say what a brilliant design! secondly i would love to be able to make one of this, would it be possible to get information on what wood you used, how much of it, what angles you used and a step by step guide. also I have subscribed! thank you, god bless

I like it thanks

I used your video to make a similar version of this birdhouse and its currently occupied by a family of chickadees. Thanks

How big are your cuts as I would love to make one of these they look really nice really enjoyed watching your video

turned out nice guy really nice kind of has a Japanese vibe to it good stuff bro tweet tweet ;>)

It is very nice looks like a fun project. I was looking for your plans on your site but it seems your website is down.

rst of all I want to say what a brilliant design! secondly i would love to be able to make one of this, would it be possible to get information on what wood you used, how much of it, what angles you used and a step by step guide. also I have subscribed! thank you, god bless

Hello Jason - Awesome looking bird house! I am having a hard time with the roof angles on the 6-sided bird house I have built. Can you please post the Mitre and pitch angles you used for your roof. Thanks much! Jim

Great project came out great what were you using on the drill press to smooth off The curled parts.

I have enjoyed making your six sided birdhouse could you tell me please why you changed your jig saw half way through making the door in the base of the bird house. Colin from Australia

What is the angle for the roof you cut to give pitch? And should there of been a angle cut on top of the walls to match the pitch angle?

Thanks for sharing, great work, what table saw are you using ? looks great. Kay x

The music gets a like too, awesome work!!

nice

Top drawer, very nice workmanship. Would the roof leak at the joint over time ?

What a great birdhouse, Could you supply a complete set of drawing for it? Just let me know the cost, it is well worth it. Thanks, Rich

Nice design, just wondering how you will clean it out each year.

Does anybody have the dimensions for the roof on the six-sided bird house

can I buy this bird house is great!

Hi,jason,can you give dimensions of each pieces ?

Hi Jason. This is Germany calling. I have problems cutting out the roof. Could you please publish the measurements (size of the board, angels, length of shindel) Thanks a lot.

superbe, l'angle est de combien svp?

Great Birdhouse. Where can I get the plans?

do you have materials list? and sizes?

Awesome birdhouse! So, how did the contest go?

You showed me, but I need the blade angle for the roof. Can't see it on the video. Is it 5 degrees? Would be nice if you included the sizes of the six sides just to be sure. Looks like 4 inches and 30 degree blade angle? It would be helpful for a mid level wood worker. Thanks.

Are you going to make more bird houses ??

30° on the six sides, what is the angle for the top?

What was the angle cuts in the beginning to cut the six sides And put them together

Where can I find the patterns

Bonsoir pouvez vous nous donner le plan et les dimensions des éléments et quel bois prendre

Very nice house! The music was a pain, especially for headphones users..

What's the dimensions of the roof

Nest time can you make Carbord bird house please This house in cool

do you have plans fir this birdhouse

how did you cut the roof for the house?

Whats up with the roof ?

Good job! But is not a "complete bird house" - the roof needs to be water-prove (covered with plastic, metal sheet...). Then, will be a complete and quality lob! Thank you for posting your video! Very nice when a person does something beautiful, unusual, and creative! Personally, I will do the opening in a side of the house (it is more practical), but a little time consuming (who counts when create something nice and good for birds).

Ou se procurer le plan