PwnCNC Automatic Tool Changer

Рет қаралды 12,170

Күн бұрын

Watch our Onefinity Elite carve a 3D Mandalorian and hear about our exciting Automatic Tool Changer.
The Automatic Tool Change Spindle is expected to premier on Black Friday!
Click below for a list of all the tools used in this video
Join us on Facebook: / 2993800347512326
Instagram: / pwncnc
Onefinity Elite Woodworker: tinyurl.com/43nkjt24
.25 Downtown Jenny: tinyurl.com/25nt72uc
1/16" Skinny Jenny: tinyurl.com/3kudn8t3
PwnCNC V10 8025 Dust Boot: pwncnc.com/products/dust-boot...
#pwncnc #onefinity #cnc #cncrouter #masso #woodworker #3dcarving #dustboot #atc #atccncrouter

Пікірлер: 62

@JasonC75 10 ай бұрын

Great job. Making the onefinity elite even more powerful of a machine

@izzyswan 8 ай бұрын

This is so cool! Great Job!

@AnnonymouS411 8 ай бұрын

Looking forward it, happy to see that your incorporating the automatic tool changer. A big plus

@chrispelletier2728 10 ай бұрын

Very cool!!

@smaartfuture923 8 ай бұрын

This is so cool!!!!!!! Great job!

@billcarriveau 10 ай бұрын

Good work!

@flashforum939 10 ай бұрын

Just received your spindle kit. Great buying experience though shipping and import taxes to Europe does make it somewhat costly. But how great it is to see how you guys keep on innovating. You are truly making some awesome stuff for the CNC community 🏆

@8thsinner 10 ай бұрын

How bad was the import? i've just ordered one with tube bundle and iot too.

@PwnCNC 10 ай бұрын

@@8thsinner Depends on the country. This is out of our control, i'm afraid... but customers have reported anywhere from a few hundred dollars to as high as $500 depending on the country.

@JoeLazzara 10 ай бұрын

Wow, this is great Daniel. Dominating it, buddy. 👍👍 This doesn't apply to my machine, but, will you ever have something that would hold more than three bits, like if someone wanted to set it up to have 4 or 5 different bits? OR, maybe like a "bit station" where you can put ALL of your bits, vbits, all your upcut/downcut endmills, and leave them there and number them accordingly. I think I like that idea!!🤔😄Its brilliant.

@scott31312 10 ай бұрын

ponders price : ). And my Pwncnc spindle is working great.

@billcarriveau 10 ай бұрын

I would recon 2.2kw atc would convert to >2.2k 🎉 kit

@DRMadeIt 10 ай бұрын

This might have just pushed me from a commercial machine to a onefinity

@billcarriveau 10 ай бұрын

But the differance between a commercial machine and a hobby machine are still miles apart but this is a highly wanted addition to our hobby machines!

@DRMadeIt 10 ай бұрын

@@billcarriveau i fall dead in the middle of hobby and commercial. I do commercial work but not at the quantity that justifies spending $20k + on a machine. Much more than that if I want atc

@goforthbmerry 10 ай бұрын

I want one!

@SaulSalt 10 ай бұрын

This looks really awesome. could you make a video showing just how far you can push that spindle? Maybe comparing it to a Makita router or other spindles to really get an idea of the difference in performance and speed.

@PwnCNC 10 ай бұрын

Thanks for the idea!

@RockhollowCNCServices 10 ай бұрын

How much psi is needed for this? I assume very little volume. I’ll be running a filtered air supply ahead of time. Brilliant!

@dangoras9152 10 ай бұрын

Brother u gonna have one for the millright ... Keep it up brother

@PwnCNC 10 ай бұрын

If your MR is running the Masso yes... full ATC features are possible. If not, then MTC is definitely possible. Ex: my MR has the older Arduino controller and thus will only run as an MTC.

@thefilthelement 8 ай бұрын

With the ATC on the bed, how easy is it to remove/put back on with larger work materials that might need that space?

@geekverve 24 күн бұрын

I would have found the carve fascinating, had you removed the dust shoe for the video. Great looking product, though.

@PwnCNC 24 күн бұрын

Be sure to sign up for our instagram... we have lots of fascinating carving shorts posted there: instagram.com/reel/C8YYm_1N9xK/?igsh=MzRlODBiNWFlZA==

@carlslater7492 10 ай бұрын

Curious on the tool holder being used. What type is it?

@peterfreedom 5 ай бұрын

What do you need on the spindle to hold the ER20 collet? How does it hold without any intervention?

@PwnCNC 4 ай бұрын

ER20 is a collet/nut/shaft size standard. These ATC motors use ISO20 tool holders which we order with ER20 collet capabilities. I believe we can get an ISO20 with an ER16 collet but our little business has standardized on the er20 or er11 size products. These ATC motors have a draw-bar which grabs hold of the ISO20 tool holder. The drawbar is activated by pneumatics to release the tool.

@carlitossierras3808 8 ай бұрын

Hello friend, that tool change system works for a CNC workbee 1515 xpro v5

@PwnCNC 8 ай бұрын

Out of the gate our full ATC functionality will be limited to folks with Masso controllers. However you will be able to use it in MTC mode (kzfaq.info/get/bejne/f6x_nraLspqudac.html) which makes bit-changes a push of a button. As we research and document more and more CNC Controllers capable of ATC functionality, we will share that understanding. ATM i'm not sure if the xPro v5 is capable of ATC, but we will look into it.

@andrefedorchuk4269 9 ай бұрын

Is this ATC limited to 3 tool holders, or can you add as many as CNC can fit?

@PwnCNC 9 ай бұрын

You can add as many as can fit up to 99 which is the Masso controller limit. If using another controller... not sure. Planning to ship 4 tool holders with the kit and extras available.

@pepper7144 10 ай бұрын

Will this ATC be an add on for existing 80mm spindles? Please say it will!!!!!

@PwnCNC 10 ай бұрын

There will be an upgrade path for existing customers to the new ATC functionality.

@SessionGodfather 10 ай бұрын

would this work on a wall mounted setup?

@PwnCNC 10 ай бұрын

Technically, yes with the correct tool holder rack. But right out of the box, no.

@RockhollowCNCServices 10 ай бұрын

When it picked up the taper bit it did t touch the zero plate. Should it have?

@PwnCNC 10 ай бұрын

It is optional. The z offset has already been recorded by the masso so it’s not necessary every bit change.

@RockhollowCNCServices 10 ай бұрын

@@PwnCNC so even faster. Sweet!

@paulsullivan649 10 ай бұрын

Can't wait to see a price 🙃

@MG6Makes1776 10 ай бұрын

He suggested a price on FB.

@Chasecity100 9 ай бұрын

Is there a way to install the atc and preserve the 4x4 cutting area ?

@jermkozac 7 ай бұрын

There is not. My plan is to make the section of my spoilboard that my tools will be lined up(Y axis) be removable. I rarely have the need for 4x4 sheet, but this will make that possible. I am also having a panel removable on the opposite side to reveal a vertical cut station.

@peterfreedom 5 ай бұрын

I saw a KZfaq video of a guy who did it. The tool holders retracts itself on springs. When the Y axis approach the back , it push on a mechanism that multiply by 5 the movement of the tool holder. I will try to find it back

@Chasecity100 5 ай бұрын

@@peterfreedom yes I think i saw that on a facebook group

@peterfreedom 5 ай бұрын

kzfaq.info/get/bejne/kMt_iMeg2NWpcoE.htmlsi=UVj4RhLTLtV-hTYE

@goodwinml 10 ай бұрын

Is the ATC going to work with S03's?

@PwnCNC 10 ай бұрын

Unfortunately no. The full ATC functionality won't work, however it can work in MTC functionality... this is where you press a button to swap bits. Far quicker than the 2-wrench method of today.

@goodwinml 10 ай бұрын

@@PwnCNC , thanks. I’ll stick with your collars I guess. I love them anyway.

@xiltoid875 9 ай бұрын

Would be nice if you made this also work with the shapeoko 5 pro

@PwnCNC 9 ай бұрын

Although it won't be full ATC on the S5P, it can support MTC which is a 1-button tool-swap. We've also helped technically with Brayan on his Masso upgrade for his Pro ... stay tuned for the 2024 big project ;-)

@xiltoid875 9 ай бұрын

Can you make video and show us how to manually control to swap tool

@PwnCNC 9 ай бұрын

Hello @@xiltoid875 , are you referring to the MTC operation (kzfaq.info/get/bejne/f6x_nraLspqudac.htmlsi=4Y-fxLXERPRBdd-M) or actually changing the bit in a single tool holder?

@aaronb8698 10 ай бұрын

Where do I buy it don't see it on your site?

@PwnCNC 10 ай бұрын

We are still finishing up the final touches and pre-orders are expected to start on Black Friday. Come join us on Facebook at facebook.com/groups/pwncnc

@StephaneMcGraw 10 ай бұрын

Will this work on the Sienci Long Mill MK2? Please say yes

@Spyderman500 10 ай бұрын

Ugh, I don’t do Facebook. Maybe you guys can setup a real site

@WimbledonWoodwork 10 ай бұрын

Shapeoko version coming?

@MG6Makes1776 10 ай бұрын

no Masso...so, not going to happen.

@PwnCNC 10 ай бұрын

Actually...sort of! It will be as an "MTC", using a button to manually change the bits. And, we are providing an upgrade path to all of our current customers who have spindle kits so that they may use some of the parts they already have. :-)

@WimbledonWoodwork 10 ай бұрын

Interesting - would buy that - also started looking at adding a masso to my shapeoko!