Quad Lock Charger Detailed Install

Quad Lock Charger Detailed Install - Motorcycle Mounted

Рет қаралды 6,951

2 ай бұрын

Get 10% off at Quad Lock with Code Jake10, bit.ly/49MiWtu
Wireless charging on your motorcycle with a locked down, vibration resistant phone mount. I'll show you how to install this Quad Lock setup including the "scary" electrical work.
My Gear
Helmet imp.i104546.net/nLXJYo use code JAKE10 for 10% off
Hoodie imp.i104546.net/OrEVJK use code JAKE10 for 10% off
Gloves imp.i104546.net/DKyz7j use code JAKE10 for 10% off
Pants imp.i104546.net/jreAqe use code JAKE10 for 10% off
Shoes imp.i104546.net/DKen9q use code JAKE10 for 10% off
Base Layer imp.i104546.net/YgoQqK use code JAKE10 for 10% off
Patron / thegardensnake
Merchandise www.jakethegardensnake.com
Facebook / thegardensnake
KZfaq / @thegardensnake
Twitter #!/thegardensnake
Instagram / jake_thegardensnake
Business inquiries,
thegardensnakeyt@gmail.com

Пікірлер: 59

@DorkintheRoad 2 ай бұрын

"If he's dead, should I even exi...." LOL.

@spicy110 2 ай бұрын

I have never seen a battery with two sets of terminals! Thats a really good idea!

@TheGardenSnake 2 ай бұрын

I think they do it to avoid having to make multiple versions. But it gives you a good option for accessories too.

@TheMotoDude420 2 ай бұрын

I had the ram mount and lost my phone out of it multiple times. Been using and selling the quadlock stuff for about a year and it's fantastic. Even after going down the phone doesn't budge.

@thouseinthehouse 2 ай бұрын

You're trespassing brotherrrr.

@e364life 2 ай бұрын

I have installed this on my MT07 and I am really pleased with its performance. I am considering upgrading to an Antigravity lithium battery. However, I plan on getting a 12v plug adapter to connect it to the Yamaha 12v switched power terminal beneath the tank. This will help prevent the charger from staying on all the time. Currently, I use a bulky smart/auto power adapter which takes up a lot of space. Despite that, I still love my setup.

@cantdowhoolies 2 ай бұрын

Love my quad lock.

@RadDadisRad 2 ай бұрын

I have the Quad Lock offset bar mount, with the anti vibration piece and the all weather mag safe charger on my 2024 Street Triple 765 RS. I’ve vibrated the camera out of 2 different iPhone 13 Pro Max phones.

@mattwilliams7454 2 ай бұрын

Though i haven't shopped around a ton ive had good luck with quad lock

@joeblow9035 2 ай бұрын

Stretching electrical tape is fine, you just don’t want to stretch the last couple wraps. Wrap them loosely to give the adhesive a chance to stick before the tape starts retracting.

@kaapos9442 2 ай бұрын

What happened to Gixxer Brah bike?

@TheGardenSnake 2 ай бұрын

I’m working on it. Just haven’t stopped to edit a video lately.

@AndyBop 2 ай бұрын

@@TheGardenSnakewhy

@RadDadisRad 2 ай бұрын

It’s not Gixxer Brahs bike. It’s a clone for content. Gixxer Brah will tell you that. He asked JtGS to fix a messed up clone of his bike.

@christopherjohnson3377 2 ай бұрын

I’ve got several thousand miles with a quad lock. I like them, my only complaint is when I get caught in the rain the rain pancho for it is kind of awkward.

@tomelposh Ай бұрын

Jake! I see the NK back there 👀 I need more content until I can get my hands on one 😭

@wilsonstein3d799 19 күн бұрын

would you be able to do a tutorial on wiring the 12v-24v wireless head?

@ryanking6811 2 ай бұрын

I love mama

@tevinthomas4688 2 ай бұрын

Have you tested the klx300sm? Im stuck between the crf300l and the klx300sm. Honda seems to have more potential for engine mods but the kawasaki comes with sm wheels and better suspension.

@MileWheelies 2 ай бұрын

The mag case alone is pretty slept on I think. I haven’t had a quad lock on my bike in months but still rock the mag case. Also jakey, you should look into some flush cut wire snips, wayyy safer than a blade when cutting zip ties 🫶🏻

@nathanchambers4605 2 ай бұрын

Yoo say me and my buddy wanted to vlog together but with quads and dirt bikes what should we use camera wise for our helmet and if there a way for us to use mics and talk to each other

@sixpest 2 ай бұрын

Jake is becoming Micheal bay. *This is a good thing I promise*

@RJ_DSRider 2 ай бұрын

Wireless charging on a bike has proven to be a bad idea in areas where it gets hot. It tends to overheat the phone and then it shuts down. Not good if you are in bfe and relying on the phone for nav. I use a quad lock, but I cable charge.

@DakotahNaugle 2 ай бұрын

I’ve had my quad lock on three bikes now. From a GSX-S750 at 150mph and two hellacious vibrating solid mounted Harley’s and have an iPhone and have had ZERO issues.

@RadDadisRad 2 ай бұрын

You’re lucky. My Street Triple has killed the camera on 2 different iPhone 13 Pro Max’s. That’s with the vibration damper.

@DakotahNaugle 2 ай бұрын

@@RadDadisRad that’s wild! I run a vibration dampener as well and mines held up even with 3-4 hour straight trips.

@RadDadisRad 2 ай бұрын

@@DakotahNaugle I run a bar offset mount, with the vibration damper and the all weather charger. Once I added the charger I started having issues. Like everything is too heavy for the vibration damper.

@DakotahNaugle 2 ай бұрын

@@RadDadisRad must be a luck of the draw type thing. I run an offset and the all weather charger as well lol

@RadDadisRad 2 ай бұрын

@@DakotahNaugle I honestly think it’s a mass thing. Didn’t have issues with my Pro Max until after adding the charger. I don’t have issues with my basic iPhone on the charger, only my Pro Max.

@GHOSTNINJASD 2 ай бұрын

The one issue I have is when it's too hot out it stops charging. When its cold out, works great.

@ryand1952 2 ай бұрын

i have it on 3 bikes. 2 125cc singles and a 650cc single. have like 10000miles on the 650 with the quad lock and the vibration damper. only issue i had was i dont have an iphone so couldnt get a case. i used the universal mount. but the 3m tape on it when i stuck it to my phone was terrible it just fell off. i ended up using thicker better 3m and its been on for over a year now.

@TheGardenSnake 2 ай бұрын

They have more than iPhone mounts. Pretty sure they do most of the popular ones.

@jasonb6570 2 ай бұрын

They have cases for pretty much every smart phone made in the last 6+ years

@Davemcmasters 2 ай бұрын

There’s also an ON/OFF button on the back of the wireless charger.

@TheGardenSnake 2 ай бұрын

Haha I just found that, had no idea

@LILMADERR23 2 ай бұрын

What happens if my phone is already charged?

@tr1hollywood 28 күн бұрын

They need an on/off switch for the charger pad. I can see that draining my battery.

@Minionmoto529 Ай бұрын

i wouldn't mind having that quad lock but for a dirt bike that's off road use only, i don't think i want to risk breaking my phone.

@TheGardenSnake Ай бұрын

I hear that, I have stick and branches rip across that part of the bike all the time when I’m trail riding. I’ll definitely pop it off when doing that.

@wfthkttn 2 ай бұрын

Isn't crf300 already have 12V AUX you can just plug into?

@TheGardenSnake 2 ай бұрын

Yes but I wanted to show how to do it when thats not an option

@AntonioFederico_._ 2 ай бұрын

Quick question: Is this wiring solution very different from splicing a wire from the bike (like the brake light switch) to get power to the charger? That way it should only have power when the bike is turned on right? Given it is the correct voltage of course. I get that this is of course easier than splicing wires :)

@TheGardenSnake 2 ай бұрын

I don't like doing that because that circuit wasn't meant for that much current. Sometimes you get away with it but often you start popping fuses. And NEVER put a bigger fuse in. That's not how or why this works.

@AntonioFederico_._ 2 ай бұрын

@@TheGardenSnake Thanks for replying Jake! Makes total sense what you're saying... Anyways keep up the great work! Greetings from the Netherlands ✌️

@JDelta87 2 ай бұрын

I thought the bit at the beginning was pretty funny too.

@22smcrrider96 2 ай бұрын

I just can't get behind a phone mount that requires me to have a crappy case on my expensive phone! I'll be staying with RAM mount

@TheGardenSnake 2 ай бұрын

Is it waterproofing you’re after?

@22smcrrider96 2 ай бұрын

@@TheGardenSnake no I'm not really worried about that. It's more I need an extremely rugged case that can handle my abuse and to keep all the coal and dust from my job out of my phone. I really like my juggernaut case. It's about the only thing I've found to hold up to what my phone goes thru daily.

@TheGardenSnake 2 ай бұрын

Interesting. They do make a stick on piece so you can use your own case. I had a similar thing when I ran a rockform mount. I had a life proof battery case for my phone and wanted to keep using that. So I put a stick on locker and it worked great. Only downside to those stick on lockers is they make the phone a bit thicker.

@22smcrrider96 2 ай бұрын

@@TheGardenSnake id be a lil worried about the sticker losing its stick and then all of sudden I'm watching my phone turn into a bird lol. I've been using my ram mount since 2022 when I bought my supermoto and haven't really ever had one complaint. It holds up shockingly well. Especially with it being on a big single. Just gotta make sure the bands are on right to be extra careful.

@garagesa 2 ай бұрын

I’ve been using quad lock for a few years now and love it. I actually like the case as well. It’s a simple case, but it’s done very well at protecting my phone. I could tell you the crashes it’s survived but the real testimony is I have a 2 year old and my phone has never been damaged.

@CraigSmith568 2 ай бұрын

I just put my phone in my pocket. It only needs charged about every three or four days.

@50nick83 2 ай бұрын

Third

@dema669 2 ай бұрын

work on the wheelies some more please

@TheGardenSnake 2 ай бұрын

I’m pretty busy these days to go to lot day after day. Work and dad duties have me pretty booked. And KZfaq isn’t actually friendly to videos featuring lots of wheelies.